Re: manually configure network

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]





On 07/12/2017 09:58 PM, mick howe via arch-general wrote:
On 13 July 2017 at 01:17, Mrrob <rob@xxxxxxxxxx> wrote:

On 13/07/17 07:09, mick howe via arch-general wrote:

I've just changed ISP and I can't get the changed configuration to stick.

I'm using 'static IP address - manual assignment' from Network
configuration wiki page.

I need to change my address from 192.168.1.0/24 to 192.168.20.1/24.

using iproute2 tools as per wiki I can get everything working UNTIL I
reboot, at which time some of the settings show the old values and others
the new.

I've been manually configuring these settings without problems since I
started using linux in 1994.



I assume that (as well as changing ISPs) you have changed your router and
it has a different internal range to the old one.


​Correct​



If you have an IP address automatically after booting then something is
bringing up the network automatically. Assuming your Arch install is newer
than 2013 then I would expect you've configured netctl to manage the
interface.


​About april 2013​
​, can't remember details of what I did then but I would have used what was
most like the ​the original method.


Look in /etc/netctl

[mick@cave ~]$ ls -aR /etc/netctl
/etc/netctl:
.  ..  examples  hooks  interfaces

/etc/netctl/examples:
.                ethernet-static  tunnel         wireless-wpa
..               macvlan-dhcp    tuntap        wireless-wpa-config
​​
bonding          macvlan-static   vlan-dhcp      wireless-wpa-configsection
bridge           mobile_ppp       vlan-static    wireless-wpa-static
ethernet-custom  openvswitch      wireless-open
ethernet-dhcp    pppoe            wireless-wep

/etc/netctl/hooks:
.  ..

/etc/netctl/interfaces:
.  ..


and

$ systemctl list-unit-files --state=enabled

---
mrrob
---



You are probably using dhcpcd. This is what is installed when initially setting up the OS. Depending on exactly what settings are being reverted to default it may be normal behavior. What you need to do is find out exactly which network manager you are using and exactly what settings are not sticking across a reboot. The fix is probably not difficult but need more info to be able to make intelligent suggestions. I had a problem with dhcpcd reverting my DNS servers to the ISP defaults on every restart.

--Rich



[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux