Re: ReadyDLNA/MiniDLNA doesn't work behind wireless

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Hi,

On 6/4/2017 4:45 PM, Giovanni Santini via arch-general wrote:
> Il 04/06/2017 16:10, ITwrx.org ha scritto:
>> The status page is properly accessible from where? A x86 computer that's
>> on your wired network? or from a device connected to network via wireless?
> 
> MiniDLNA publishes automatically a web page on port 8200 for checking
> its status.
> 
> My computer is an old x64-capable server.
> It is connected to my network through a wireless USB adapter.

Just a wild guess: is your wireless network a separate subnet? If so,
there's your problem. AFAIK MiniDLNA uses SSDP[1] to announce itself,
using a site-local multicast-IP that isn't routed. You need to bridge
your wireless network into the wired one, meaning it has to be the same
subnet.

-- 
Regards,
Arno

[1] https://en.wikipedia.org/wiki/Simple_Service_Discovery_Protocol

-- 
Gruß,
Arno.



[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux