Hi On 03/18/2016 12:13 AM, Kenneth Jensen wrote:
Hi, Have you read https://wiki.archlinux.org/index.php/L2TP/IPsec_VPN_client_setup ?
Yes, I read it. But as per my ipsec.conf, my strongswan configuration doesn't support L2TP protocol. (please find my ipsec.conf towards the bottom of this email). My other clients are using IKEv2 without any problem. I haven't tested any other client with L2TP yet.
# ipsec.conf - strongSwan IPsec configuration file config setup # uniqueids=never charondebug="cfg 2, dmn 2, ike 2, net 2" conn %default keyexchange=ikev2 ike=aes128-sha256-ecp256,aes256-sha384-ecp384,aes128-sha256-modp2048,aes128-sha1-modp2048,aes256-sha384-modp4096,aes256-sha256-modp4096,aes256-sha1-modp4096,aes128-sha256-modp1536,aes128-sha1-modp1536,aes256-sha384-modp2048,aes256-sha256-modp2048,aes256-sha1-modp2048,aes128-sha256-modp1024,aes128-sha1-modp1024,aes256-sha384-modp1536,aes256-sha256-modp1536,aes256-sha1-modp1536,aes256-sha384-modp1024,aes256-sha256-modp1024,aes256-sha1-modp1024! esp=aes128gcm16-ecp256,aes256gcm16-ecp384,aes128-sha256-ecp256,aes256-sha384-ecp384,aes128-sha256-modp2048,aes128-sha1-modp2048,aes256-sha384-modp4096,aes256-sha256-modp4096,aes256-sha1-modp4096,aes128-sha256-modp1536,aes128-sha1-modp1536,aes256-sha384-modp2048,aes256-sha256-modp2048,aes256-sha1-modp2048,aes128-sha256-modp1024,aes128-sha1-modp1024,aes256-sha384-modp1536,aes256-sha256-modp1536,aes256-sha1-modp1536,aes256-sha384-modp1024,aes256-sha256-modp1024,aes256-sha1-modp1024,aes128gcm16,aes256gcm16,aes128-sha256,aes128-sha1,aes256-sha384,aes256-sha256,aes256-sha1! dpdaction=clear dpddelay=300s rekey=no left=%any leftsubnet=0.0.0.0/0 leftcert=vpnHostCert.pem right=%any rightdns=8.8.8.8,8.8.4.4 rightsourceip=172.16.16.0/24 conn IPSec-IKEv2 keyexchange=ikev2 auto=add conn IPSec-IKEv2-EAP also="IPSec-IKEv2" rightauth=eap-mschapv2 rightsendcert=never eap_identity=%any conn CiscoIPSec keyexchange=ikev1 # forceencaps=yes rightauth=pubkey rightauth2=xauth auto=add
