Hi On Wed, May 20, 2015 at 11:55 AM, Csányi Pál <csanyipal@xxxxxxxxx> wrote: > Hello, > > I have a > FTDI TTL-232RG-VREG3V3-WE > USB to TTL Serial Cable. > > On my Arch linux I want to setup a connection through this cable. > > How can I achieve this goal? > > The output of the 'lsusb' command is: > Bus 002 Device 005: ID 0403:6001 Future Technology Devices > International, Ltd FT232 USB-Serial (UART) IC > > I'm trying to follow steps described here: > http://linux-sunxi.org/Cubieboard/TTL > > but I have more difficulties. > > 1. I can't find to install the 'cu' utility neither on Arch linux > repository nor in AUR. cu is in Arch repos as it was told above. There are other terminal applications: minicom, com. > 2. There is no '/dev/ttyUSB0' on my system here. Then it means driver has other name. Check 'dmesg' - kernel should write usb device name that was created. It can be /dev/ttyUSB1, ... /dev/ttyACM0, ... Also make sure this file is readable to your user - you might need be added to right UNIX group. > > So eg. > screen /dev/ttyUSB0 115200 > > doesn't work here: > Cannot exec '/dev/ttyUSB0': No such file or directory > > I can't find any advices on Arch Wiki. > > Any advices will be appreciated! > > -- > Regards from Pal
