Hi :) On Tue, Apr 9, 2013 at 6:16 PM, Karol Babioch <karol@xxxxxxxxxx> wrote: > Hi, > > I've got four HDDs and added them into a RAID-5 array, which basically > works just fine. However the performance sucks quite hard. I get only > about 70 MB/s when it comes down to reading and writing speeds of about > 35 MB/s. > > The hardware itself is quite decent: Intel Xeon E31260L, 8 GB RAM and > four Samsung HD204UI's. With the same setup and a Ubuntu live > environment I get about 270 MB/s reading speed and 130 MB/s writing speed. > > Therefore there must be a fundamental difference. I've compared various > values from sysctl between both environments and set them accordingly, > but to no availability. > > Anyone else experiencing the same issues and/or can you point me in the > right direction? > > At least I would like to saturate my Gigabit Ethernet connection. What filesystem? What "benchmark" are you running? Stripe size? HDDs connected to a PCI(e|X) RAID controller or on board controller? Those 70 MB/s and 35 MB/s are from a client node or local? If they're from a client node, what are you using: FTP, SAMBA, NFS, ...? Config files? Rafa
