Re: systemd network configuration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



On Wednesday, July 25, 2012 11:57:02 AM Tom Gundersen wrote:
> On Jul 25, 2012 2:45 AM, "David Benfell" <benfell@xxxxxxxxxxxxxxxxx> wrote:
> > rc.d start network #successfully gets some address and a route
> > for i in 74.207.225.79/32 74.207.227.150/32 173.230.137.73/32
> > 173.230.137.76/32
> > do
> > 
> >         ip addr add "${i}" dev eth0
> > 
> > done
> > ip -6 addr add 2600:3c02::f03c:91ff:fe96:64e2/64 dev eth0
> > for j in $(seq 0 1)
> > do
> > 
> >         for i in $(seq 0 9) a b c d e f
> >         do
> >         
> >                 ip -6 addr add "2600:3c02::02:70${j}${i}/64" dev eth0
> >         
> >         done
> > 
> > done
> > 
> > Basically, with the IPv4 address, my intent is to make sure I've got
> > all four of those addresses up. But I wasn't getting a route unless I
> > used the network start script.
> > 
> > In my copy of the Arch wiki, I"m not seeing how to do something
> > similar under systemd. How, ideally, should I be doing this?
> 
> Systemd does not come with a network daemon. Either you could use one of
> the regular ones (I use network manager on all my machines), or you could
> tell systemd to ruin your script.
                            ^^^
This was worth a good laugh this morning




[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux