2012/6/18 Victor Silva <vfbsilva@xxxxxxxxx> > > > 2012/6/16 Victor Silva <vfbsilva@xxxxxxxxx> > >> >> >> 2012/6/16 Victor Silva <vfbsilva@xxxxxxxxx> >> >>> 2012/6/15 Victor Silva <vfbsilva@xxxxxxxxx> >>> >>>> >>>> >>>> 2012/6/15 Don deJuan <donjuansjiz@xxxxxxxxx> >>>> >>>>> On 06/15/2012 02:48 PM, Victor Silva wrote: >>>>> >>>>>> 2012/6/15 Don deJuan <donjuansjiz@xxxxxxxxx> >>>>>> >>>>>> On 06/15/2012 08:29 AM, David C. Rankin wrote: >>>>>>> >>>>>>> On 06/14/2012 03:12 PM, Victor Silva wrote: >>>>>>>> >>>>>>>> I have no shares. Can I somehow try to umount everything in mtab? >>>>>>>>> I'm not >>>>>>>>> familiar with the internal workings of mtab. I will read a bit. >>>>>>>>> Also the >>>>>>>>> only thing I assume could be hanging is my external HD which I >>>>>>>>> disconnected >>>>>>>>> having no effect on the problem behavior. Still I reported that my >>>>>>>>> /boot >>>>>>>>> partition was being mounted and listed on kde file manager (forgot >>>>>>>>> its >>>>>>>>> name) which was not default behavior. So could be the case that >>>>>>>>> /boot is >>>>>>>>> hanging my shoutdown? I don't get the reason umount -a && shutdown >>>>>>>>> -h now >>>>>>>>> did not do the trick. >>>>>>>>> >>>>>>>>> I ask gently again if you could inform me why did the "magic >>>>>>>>> reboot" did >>>>>>>>> work while shutdown did not. >>>>>>>>> >>>>>>>>> Regards, >>>>>>>>> Victor >>>>>>>>> >>>>>>>>> >>>>>>>> Victor, >>>>>>>> >>>>>>>> I am no expert in the shutdown logic that Arch uses, but it is >>>>>>>> fairly >>>>>>>> easy to follow. During shutdown, /etc/rc.shutdown is called and the >>>>>>>> 'umount_all' command is supposed to take care of unmounting all >>>>>>>> non-api >>>>>>>> filesystems. If you have specific commands you need run in >>>>>>>> _addition to_ >>>>>>>> what is done by rc.shutdown, then you can put those commands in >>>>>>>> /etc/rc.local.shutdown. The /etc/rc.local.shutdown must be >>>>>>>> executable to >>>>>>>> be called (chmod +x) or (chmod 0755). The rc.local.shutdown file is >>>>>>>> called close to the beginning of rc.shutdown. >>>>>>>> >>>>>>>> Looking at your mtab file and comparing to mine, I do not have any >>>>>>>> usb drives connected to my system. Somebody more familiar with >>>>>>>> issues >>>>>>>> related to usb drives will need to comment. You might want to try >>>>>>>> Guillermo's shutdown modified as follows: >>>>>>>> >>>>>>>> umount -arfl -t usbfs,fuseblk >>>>>>>> >>>>>>>> I don't know if that will do it, but you have 5 fuseblk >>>>>>>> filesystems >>>>>>>> and 1 usbfs mounted. I don't know how Arch handles their unmounting. >>>>>>>> >>>>>>>> Lastly, I do not use the gnome gvfs-fuse-daemon. That is another >>>>>>>> entry to look at and make sure it isn't the issue. Maybe try your >>>>>>>> rc.local.shutdown with: >>>>>>>> >>>>>>>> umount -arfl -t usbfs,fuseblk >>>>>>>> killall gvfs-fuse-daemon # or whatever that process actually runs >>>>>>>> as >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> Well just tried reinstalling made no difference. So I guess I will >>>>>>> be >>>>>>> looking it why it is starting that way. It may or may not be related >>>>>>> to the >>>>>>> shutdown issues. But other than this one thing my symptoms seem to >>>>>>> match >>>>>>> this minus the screen turning red when freezing. I will post back >>>>>>> here if I >>>>>>> sort anything out that may help this problem. >>>>>>> >>>>>>> I wil try this at home but I'1m at work atm, >>>>>>> >>>>>> https://bugs.archlinux.org/**task/30136<https://bugs.archlinux.org/task/30136> >>>>>> ry this kernel paramether reboot=pci >>>>>> More info: >>>>>> http://intosimple.blogspot.**com.br/2012/06/reboot-on-dell-** >>>>>> latitude-e6520-with-arch.html<http://intosimple.blogspot.com.br/2012/06/reboot-on-dell-latitude-e6520-with-arch.html> >>>>>> >>>>>> >>>>> After reading more into that parameter I found this >>>>> http://linux.koolsolutions.**com/2009/08/04/howto-fix-** >>>>> linux-hangfreeze-during-**reboots-and-restarts/<http://linux.koolsolutions.com/2009/08/04/howto-fix-linux-hangfreeze-during-reboots-and-restarts/> >>>>> >>>>> They show more options. I am going to try the one you suggested >>>>> shortly and if that does not work do the other suggested option in the link >>>>> I posted. Thanks for pointing out your findings. >>>>> >>>>> A new kernel update was avaliable fo me today. I hoped it could fix >>>> some of the issues we were facing. In fact now I have tons of errors, dbus >>>> seems screwd and many other things, among the problems I have now is that X >>>> fails with no screen found (both nv and nvidia drivers) and I have no >>>> network interfaces I fail to get eth0 up. So >>>> *DO NOT UPDATE YOUR KERNELS >>>> *I'm quite sad as this is a even bigger mistake than the last one. So >>>> I think I need to chroot again rever to the old kernel... >>>> Anyone else expecting this kind of problem? >>>> Btw the reboor parameters for the kernel (which I've tested before the >>>> upgrade) also did not work. >>>> >>>> Regards, >>>> Victor >>>> >>>> I solved many issues still when I try to boot now I get the following >>> errors: >>> >>> *Jun 16 13:55:48 localhost kernel: [ 10.463651] microcode: failed to >>> load file amd-ucode/microcode_amd.bin >>> Jun 16 13:55:48 localhost kernel: [ 10.464913] microcode: failed to >>> load file amd-ucode/microcode_amd.bin >>> Jun 16 13:55:48 localhost kernel: [ 10.466051] microcode: failed to >>> load file amd-ucode/microcode_amd.bin >>> Jun 16 13:55:48 localhost kernel: [ 10.467189] microcode: failed to >>> load file amd-ucode/microcode_amd.bin >>> Jun 16 13:55:48 localhost kernel: [ 10.468305] microcode: failed to >>> load file amd-ucode/microcode_amd.bin >>> Jun 16 13:55:48 localhost kernel: [ 10.469389] microcode: failed to >>> load file amd-ucode/microcode_amd.bin >>> Jun 16 13:55:48 localhost kernel: [ 11.920779] sd 6:0:0:0: [sdc] No >>> Caching mode page present >>> Jun 16 13:55:48 localhost kernel: [ 11.920880] sd 6:0:0:0: [sdc] >>> Assuming drive cache: write through >>> Jun 16 13:55:48 localhost kernel: [ 11.924824] sd 6:0:0:0: [sdc] No >>> Caching mode page present >>> Jun 16 13:55:48 localhost kernel: [ 11.924924] sd 6:0:0:0: [sdc] >>> Assuming drive cache: write through >>> Jun 16 13:55:48 localhost kernel: [ 11.931887] sd 6:0:0:0: [sdc] No >>> Caching mode page present >>> Jun 16 13:55:48 localhost kernel: [ 11.931982] sd 6:0:0:0: [sdc] >>> Assuming drive cache: write through >>> * >>> Are my kernel sources messed? I'm still unable the shutdown. Anyone got >>> any ideas which can help? :( >>> >> I've solved this issue by adding microcode to modules array in rc.conf >> thou I've never used this before. Still I'm unable to shutdown. >> >> Regards, >> Victor >> > Folks I'm still investigating the issue. After I try to reboot kernel log > gave me this hint: > Jun 18 02:30:48 localhost kernel: [ 600.432301] "echo 0 > > /proc/sys/kernel/hung_task_timeout_secs" disables this message. > Jun 18 02:30:48 localhost kernel: [ 600.432303] shutdown D > 0000000000000001 0 2902 2897 0x00000000 > Jun 18 02:30:48 localhost kernel: [ 600.432305] ffff8801c39fbe30 > 0000000000000086 ffff8801ca2cafa0 ffff8801c39fbfd8 > Jun 18 02:30:48 localhost kernel: [ 600.432308] ffff8801c39fbfd8 > ffff8801c39fbfd8 ffff880199ae07f0 ffff8801ca2cafa0 > Jun 18 02:30:48 localhost kernel: [ 600.432310] 0007ffffffffffff > ffff880222b0ee00 0000000000000000 0000000000000000 > Jun 18 02:30:48 localhost kernel: [ 600.432312] Call Trace: > Jun 18 02:30:48 localhost kernel: [ 600.432315] [<ffffffff81084c22>] ? > default_wake_function+0x12/0x20 > Jun 18 02:30:48 localhost kernel: [ 600.432317] [<ffffffff8119c3b0>] ? > __sync_filesystem+0x90/0x90 > Jun 18 02:30:48 localhost kernel: [ 600.432319] [<ffffffff81222f38>] ? > blk_finish_plug+0x18/0x50 > Jun 18 02:30:48 localhost kernel: [ 600.432321] [<ffffffff814689c9>] > schedule+0x29/0x70 > Jun 18 02:30:48 localhost kernel: [ 600.432323] [<ffffffff81469455>] > rwsem_down_failed_common+0xc5/0x160 > Jun 18 02:30:48 localhost kernel: [ 600.432325] [<ffffffff81117d22>] ? > do_writepages+0x22/0x50 > Jun 18 02:30:48 localhost kernel: [ 600.432327] [<ffffffff8119c3b0>] ? > __sync_filesystem+0x90/0x90 > Jun 18 02:30:48 localhost kernel: [ 600.432329] [<ffffffff81469525>] > rwsem_down_read_failed+0x15/0x17 > Jun 18 02:30:48 localhost kernel: [ 600.432331] [<ffffffff8124afc4>] > call_rwsem_down_read_failed+0x14/0x30 > Jun 18 02:30:48 localhost kernel: [ 600.432333] [<ffffffff814678a7>] ? > down_read+0x17/0x20 > Jun 18 02:30:48 localhost kernel: [ 600.432335] [<ffffffff81171db0>] > iterate_supers+0x80/0xf0 > Jun 18 02:30:48 localhost kernel: [ 600.432337] [<ffffffff8119c4e0>] > sys_sync+0x30/0x70 > Jun 18 02:30:48 localhost kernel: [ 600.432338] [<ffffffff8146a7a9>] > system_call_fastpath+0x16/0x1b > > Google came up with: > http://www.gossamer-threads.com/lists/linux/kernel/1306758 > > Can it be the same semaphore issue? > A guy pinpointed to a pattern on the forums: * * *arti74 wrote:* *What I've noticed yet - htop shows 100% CPU usage on that command: /bin/mount -o realtime /dev/sda4 /mnt/usbhd-sda4 - I can't kill it, shutdown or reboot can't kill it either. Interesting thing is, that I don't have sda4 partition at all. My fstab:* *# /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass>* *devpts /dev/pts devpts defaults 0 0 /dev/sda2 / ext4 defaults 0 1 /dev/sda6 /home ext4 defaults 0 1 /dev/sdb1 /mnt/FA auto defaults,nosuid,nodev,uhelper=udisks,uid=1000,gid=100,dmask=0077,fmask=0177 0 0 /dev/sda3 /var reiserfs defaults 0 1 shm /dev/shm tmpfs nodev,nosuid 0 0* *uname -r 3.4.2-2-ARCH* I have the SAME problem so it seems we discovered what is wrong. No ideas about how to fix thou.