On 17 June 2012 at 13:17 Nelson Marambio <nelsonmarambio@xxxxxx> wrote: > According to the wiki [1], there is another driver xf86-video-sis which > might work better. But of course you shouldn't have installed three > drivers all together. :D > > I hope I could help you. > > [1] https://wiki.archlinux.org/index.php/Xf86-video-sis > Thank you very much for the pointers Nelson. I now have it working with the extra/xf86-video-sisimedia driver and the following xorg.conf [marshall@jynx ~]$ cat /etc/X11/xorg.conf Section "Module" Load "dbe" Load "i2c" Load "bitmap" Load "ddc" Load "dri" Load "extmod" Load "freetype" Load "glx" Load "int10" Load "vbe" EndSection Section "Device" Identifier "Card0" Driver "sisimedia" Card "** SiS 771/761 [sis761]" BusID "PCI:1:0:0" Option "UseFBDev" "true" Option "EnableSisCtrl" "yes" #Option "ForceCRT1Type" "LCD" #Option "ForceCRT2Type" "NONE" Option "CRT2Detection" "true" #For me this worked better than forceing the detection. If you use this comment out the two Force lines above this. Option "CRT1Gamma" "on" Option "CRT2Gamma" "on" Option "Brightness" "0.000 0.000 0.000" Option "Contrast" "0.000 0.000 0.000" Option "CRT1Saturation" "0" Option "XvOnCRT2" "yes" Option "XvDefaultContrast" "2" Option "XvDefaultBrightness" "10" Option "XvDefaultHue" "0" Option "XvDefaultSaturation" "0" Option "XvDefaultDisableGfxLR" "no" Option "XvGamma" "off" Option "UseTiming1366" "yes" EndSection Section "DRI" Mode 0666 EndSection Thanks again. --TIMTTMY
