On 10.04.2012 02:48, Paulo Roberto P. Evangelista wrote: > Resolved. > > I downgrade the kernel and the wireless is working again, below my hardware. > > Now only waiting for the correction > > 02:00.0 Network controller: Atheros Communications Inc. AR9285 > Wireless Network Adapter (PCI-Express) (rev 01) > Subsystem: Lenovo Device 30a1 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 17 > Region 0: Memory at d0400000 (64-bit, non-prefetchable) [size=64K] > Capabilities: [40] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA > PME(D0+,D1+,D2-,D3hot+,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- > Address: 00000000 Data: 0000 > Capabilities: [60] Express (v2) Legacy Endpoint, MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s > <512ns, L1 <64us > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ > AuxPwr- TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, > Latency L0 <512ns, L1 <64us > ClockPM- Surprise- LLActRep- BwNot- > LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- > Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- > SlotClk+ DLActive- BWMgmt- ABWMgmt- > DevCap2: Completion Timeout: Not Supported, TimeoutDis+ > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- > LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- > SpeedDis-, Selectable De-emphasis: -6dB > Transmit Margin: Normal Operating Range, > EnterModifiedCompliance- ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -6dB, > EqualizationComplete-, EqualizationPhase1- > EqualizationPhase2-, EqualizationPhase3-, > LinkEqualizationRequest- > Capabilities: [100 v1] Advanced Error Reporting > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- > UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- > UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- > UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- > CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ > AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- > Capabilities: [140 v1] Virtual Channel > Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 > Arb: Fixed- WRR32- WRR64- WRR128- > Ctrl: ArbSelect=Fixed > Status: InProgress- > VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- > Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff > Status: NegoPending- InProgress- > Capabilities: [160 v1] Device Serial Number 00-15-17-ff-ff-24-14-12 > Capabilities: [170 v1] Power Budgeting <?> > Kernel driver in use: ath9k > > [root@archlinux paulo]# > > On Mon, Apr 9, 2012 at 1:33 PM, Paulo Roberto P. Evangelista > <shellclear@xxxxxxxxx> wrote: >> Hello, >> >> Today after a pacman-Syu, my wireless network connection does not >> work, logging abaix attempting to connect >> >> #tail -f /var/log/messages >> >> Apr 9 09:44:53 archlinux NetworkManager[677]: <info> Activation >> (wlan0) starting connection 'Blackhole' >> Apr 9 09:44:53 archlinux NetworkManager[677]: <info> (wlan0): device >> state change: disconnected -> prepare (reason 'none') [30 40 0] >> Apr 9 09:44:53 archlinux NetworkManager[677]: <info> Activation >> (wlan0) Stage 1 of 5 (Device Prepare) scheduled... >> Apr 9 09:44:53 archlinux NetworkManager[677]: <info> Activation >> (wlan0) Stage 1 of 5 (Device Prepare) started... >> Apr 9 09:44:53 archlinux NetworkManager[677]: <info> Activation >> (wlan0) Stage 2 of 5 (Device Configure) scheduled... >> Apr 9 09:44:53 archlinux NetworkManager[677]: <info> Activation >> (wlan0) Stage 1 of 5 (Device Prepare) complete. >> Apr 9 09:44:53 archlinux NetworkManager[677]: <info> Activation >> (wlan0) Stage 2 of 5 (Device Configure) starting... >> Apr 9 09:44:53 archlinux NetworkManager[677]: <info> (wlan0): device >> state change: prepare -> config (reason 'none') [40 50 0] >> Apr 9 09:44:53 archlinux NetworkManager[677]: <info> Activation >> (wlan0/wireless): access point 'Blackhole' has security, but secrets >> are required. >> Apr 9 09:44:53 archlinux NetworkManager[677]: <info> (wlan0): device >> state change: config -> need-auth (reason 'none') [50 60 0] >> Apr 9 09:44:53 archlinux NetworkManager[677]: <info> Activation >> (wlan0) Stage 2 of 5 (Device Configure) complete. >> Apr 9 09:44:53 archlinux NetworkManager[677]: <info> Activation >> (wlan0) Stage 1 of 5 (Device Prepare) scheduled... >> Apr 9 09:44:53 archlinux NetworkManager[677]: <info> Activation >> (wlan0) Stage 1 of 5 (Device Prepare) started... >> Apr 9 09:44:53 archlinux NetworkManager[677]: <info> (wlan0): device >> state change: need-auth -> prepare (reason 'none') [60 40 0] >> Apr 9 09:44:53 archlinux NetworkManager[677]: <info> Activation >> (wlan0) Stage 2 of 5 (Device Configure) scheduled... >> Apr 9 09:44:53 archlinux NetworkManager[677]: <info> Activation >> (wlan0) Stage 1 of 5 (Device Prepare) complete. >> Apr 9 09:44:53 archlinux NetworkManager[677]: <info> Activation >> (wlan0) Stage 2 of 5 (Device Configure) starting... >> Apr 9 09:44:53 archlinux NetworkManager[677]: <info> (wlan0): device >> state change: prepare -> config (reason 'none') [40 50 0] >> Apr 9 09:44:53 archlinux NetworkManager[677]: <info> Activation >> (wlan0/wireless): connection 'Blackhole' has security, and secrets >> exist. No new secrets needed. >> Apr 9 09:44:53 archlinux NetworkManager[677]: <info> Config: added >> 'ssid' value 'Blackhole' >> Apr 9 09:44:53 archlinux NetworkManager[677]: <info> Config: added >> 'scan_ssid' value '1' >> Apr 9 09:44:53 archlinux NetworkManager[677]: <info> Config: added >> 'key_mgmt' value 'WPA-PSK' >> Apr 9 09:44:53 archlinux NetworkManager[677]: <info> Config: added >> 'psk' value '<omitted>' >> Apr 9 09:44:53 archlinux NetworkManager[677]: <info> Activation >> (wlan0) Stage 2 of 5 (Device Configure) complete. >> Apr 9 09:44:53 archlinux NetworkManager[677]: <info> Config: set >> interface ap_scan to 1 >> Apr 9 09:44:53 archlinux NetworkManager[677]: <info> (wlan0): >> supplicant interface state: disconnected -> scanning >> Apr 9 09:44:54 archlinux NetworkManager[677]: <info> (wlan0): >> supplicant interface state: scanning -> authenticating >> Apr 9 09:45:18 archlinux NetworkManager[677]: <warn> Activation >> (wlan0/wireless): association took too long. >> Apr 9 09:45:18 archlinux NetworkManager[677]: <info> (wlan0): device >> state change: config -> need-auth (reason 'none') [50 60 0] >> Apr 9 09:45:18 archlinux NetworkManager[677]: <warn> Activation >> (wlan0/wireless): asking for new secrets >> Apr 9 09:45:18 archlinux NetworkManager[677]: <info> (wlan0): >> supplicant interface state: authenticating -> disconnected >> Apr 9 09:45:18 archlinux NetworkManager[677]: <warn> Couldn't >> disconnect supplicant interface: This interface is not connected. This is a known bug if you google for "ath9k regression". It apparently is resolved in 3.4-rc2.
