On Sat, 2012-01-28 at 09:35 +0100, Ralf Mardorf wrote: > On Sat, 2012-01-28 at 03:32 +0100, Lars Madson wrote: > > Hi Archers, > > > > I just received that external sound card, Terrasoniq Phase X64. > > It seems to be supported in the kernel using module ice1712. > > > > I've been reading about how to make it work in the last days. > > the closer I've been to see "it" was by listing some stuff (sorry for > > imprecision I forgot how since then), > > the card would appear with a number like this : 4ugxvhgblabla. > > > > I just installed alsa-tools-ice1712 1.0.25-1 > > But it cannot sees it. > > Alsaconf shows an ISA P-n-P card...can it be the Terrasoniq? > > > > I don't know really where to start, as making a rule in udev to launch a > > .sh script, but I guess first I should find a way to see that card pluged > > somewhere, it's usb. > > also how to tell my kernel to load ice1712 maybe. > > > > Any advice are welcome!! > > > > Thanks > > Laurent > > Hi Laurent, > > "All necessary modules should be detected and loaded automatically by > udev" [1]. You don't need to do anything. Two of my sound cards are > ice1712 and I didn't configure anything, but they are detected. OTOH > those cards are PCI cards. > > Anyway, to see if your USB card is detected you e.g. can run > > $ hwinfo --usb > > Then you should get something like > [snip] > Vendor: usb 0x0944 "KORG, Inc." > Device: usb 0x010f "nanoKONTROL" > Revision: "1.00" > Driver: "snd-usb-audio" > Driver Modules: "snd_usb_audio" > [snip] > Of cause, here it's not an USB ICE1712 device. > > What happens if you run envy24control? > > FWIW on my Arch alsa-tools-ice1712 isn't, but alsa-tools is installed. > > - Ralf > > [1] > https://wiki.archlinux.org/index.php/Advanced_Linux_Sound_Architecture PS: Oops, I googled and found out your audio device is USB 2.0, they were (perhaps still are) known as not working with Linux. Regarding to your USB 2.0 device I found a thread from 2010: http://linuxaudio.org/mailarchive/lau/2010/9/13/173602 - Ralf
