wintv-hvr 850 (hybrid) not detecting any signal.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Hi,

I'm not able to get my wintv-hvr 850 to work.  It fails to find signal
in both x86-32 and x86-64 machines...

Some of the things I get (dmesg):

[  143.746636] cx231xx v4l2 driver loaded.
[  143.746862] cx231xx #0: New device Hauppauge Hauppauge Device @ 480
Mbps (2040:b140) with 6 interfaces
[  143.746865] cx231xx #0: registering interface 1
[  143.747068] cx231xx #0: Identified as Hauppauge EXETER (card=8)
[  143.747189] IR RC5(x) protocol handler initialized
[  143.761855] IR RC6 protocol handler initialized
[  143.763836] IR JVC protocol handler initialized
[  143.767621] IR Sony protocol handler initialized
[  143.772576] lirc_dev: IR Remote Control driver registered, major 249
[  143.778304] IR LIRC bridge handler initialized
[  143.911324] cx231xx #0: cx231xx_dif_set_standard: setStandard to ffffffff
[  143.933691] cx25840 3-0044: cx23102 A/V decoder found @ 0x88 (cx231xx #0)
[  143.951787] cx25840 3-0044:  Firmware download size changed to 16
bytes max length
[  145.954902] cx25840 3-0044: loaded v4l-cx231xx-avcore-01.fw
firmware (16382 bytes)
[  146.002106] i2c-core: driver [tuner] using legacy suspend method
[  146.002109] i2c-core: driver [tuner] using legacy resume method
[  146.039520] All bytes are equal. It is not a TEA5767
[  146.039526] tuner 4-0060: Tuner -1 found with type(s) Radio TV.
[  146.058870] tda18271 4-0060: creating new instance
[  146.061146] Unknown device (0) detected @ 4-0060, device not supported.
[  146.061149] tda18271_attach: [4-0060|M] error -22 on line 1275
[  146.061152] tda18271 4-0060: destroying instance
[  146.066665] tuner 4-0060: Tuner has no way to set tv freq
[  146.067769] cx231xx #0: cx231xx #0: v4l2 driver version 0.0.1
[  146.081785] cx231xx #0: cx231xx_dif_set_standard: setStandard to b000
[  146.155662] cx231xx #0: video_mux : 0
[  146.155670] cx231xx #0: do_mode_ctrl_overrides : 0xb000
[  146.156407] cx231xx #0: do_mode_ctrl_overrides NTSC
[  146.163080] cx231xx #0: cx231xx #0/0: registered device video0 [v4l2]
[  146.163173] cx231xx #0: cx231xx #0/0: registered device vbi0
[  146.163179] cx231xx #0: V4L2 device registered as video0 and vbi0
[  146.163188] cx231xx #0: EndPoint Addr 0x84, Alternate settings: 5
[  146.163194] cx231xx #0: Alternate setting 0, max size= 512
[  146.163200] cx231xx #0: Alternate setting 1, max size= 184
[  146.163205] cx231xx #0: Alternate setting 2, max size= 728
[  146.163211] cx231xx #0: Alternate setting 3, max size= 2892
[  146.163217] cx231xx #0: Alternate setting 4, max size= 1800
[  146.163224] cx231xx #0: EndPoint Addr 0x85, Alternate settings: 2
[  146.163230] cx231xx #0: Alternate setting 0, max size= 512
[  146.163235] cx231xx #0: Alternate setting 1, max size= 512
[  146.163241] cx231xx #0: EndPoint Addr 0x86, Alternate settings: 2
[  146.163247] cx231xx #0: Alternate setting 0, max size= 512
[  146.163252] cx231xx #0: Alternate setting 1, max size= 576
[  146.163258] cx231xx #0: EndPoint Addr 0x81, Alternate settings: 6
[  146.163264] cx231xx #0: Alternate setting 0, max size= 512
[  146.163269] cx231xx #0: Alternate setting 1, max size= 64
[  146.163274] cx231xx #0: Alternate setting 2, max size= 128
[  146.163280] cx231xx #0: Alternate setting 3, max size= 316
[  146.163285] cx231xx #0: Alternate setting 4, max size= 712
[  146.163291] cx231xx #0: Alternate setting 5, max size= 1424
[  146.163452] usbcore: registered new interface driver cx231xx
[  146.171942] cx231xx #0: cx231xxcx231xx: called cx231xx_uninit_vbi_isoc
[  146.171947] cx231xx #0: cx231xx_stop_stream():: ep_mask = 10
[  146.172279] cx231xx #0: cx231xx_stop_stream():: ep_mask = 8
[  146.183690] cx231xx #0: cx231xx-audio.c: probing for cx231xx non
standard usbaudio
[  146.183955] cx231xx #0: EndPoint Addr 0x83, Alternate settings: 3
[  146.183957] cx231xx #0: Alternate setting 0, max size= 512
[  146.183960] cx231xx #0: Alternate setting 1, max size= 28
[  146.183962] cx231xx #0: Alternate setting 2, max size= 52
[  146.183964] cx231xx: Cx231xx Audio Extension initialized
[  146.193525] cx231xx #0: Changing the i2c master port to 1
[  146.316797] dvb_init: looking for tuner / demod on i2c bus: 4
[  146.336561] tda18271 4-0060: creating new instance
[  146.338672] TDA18271HD/C2 detected @ 4-0060
[  146.338800] cx231xx #0: UsbInterface::sendCommand, failed with status --32
[  146.338811] tda18271_write_regs: [4-0060|M] ERROR: idx = 0x0, len =
39, i2c_transfer returned: -32
[  146.537690] DVB: registering new adapter (cx231xx #0)
[  146.537703] DVB: registering adapter 0 frontend 0 (LG Electronics
LGDT3305 VSB/QAM Frontend)...
[  146.538628] Successfully loaded cx231xx-dvb
[  146.539056] cx231xx: Cx231xx dvb Extension initialized
[  205.380044] cx231xx #0: Reloading firmware for XC5000
[  205.382731] cx231xx #0: UsbInterface::sendCommand, failed with status --32
[  205.382736] tda18271_write_regs: [4-0060|M] ERROR: idx = 0x0, len =
39, i2c_transfer returned: -32
[  205.584115] tda18271: performing RF tracking filter calibration
[  207.151305] tda18271: RF tracking filter calibration complete
[  207.151310] cx231xx #0: XC5000 firmware download completed
[  207.181681] cx231xx #0: cx231xx_dif_set_standard: setStandard to b000
[  207.255567] cx231xx #0: video_mux : 0
[  207.255569] cx231xx #0: do_mode_ctrl_overrides : 0xb000
[  207.256316] cx231xx #0: do_mode_ctrl_overrides NTSC
[  207.280078] tuner 4-0060: Tuner has no way to set tv freq
[  207.280105] cx231xx #0: vidioc_s_std : 0x1000
[  207.297331] tuner 4-0060: Tuner has no way to set tv freq
[  207.302954] cx231xx #0: do_mode_ctrl_overrides : 0x1000
[  207.303702] cx231xx #0: do_mode_ctrl_overrides NTSC
[  207.317904] cx231xx #0: cx231xx_stop_stream():: ep_mask = 8
[  207.319284] cx231xx #0: cx231xx_initialize_stream_xfer: set video registers
[  207.319577] cx231xx #0: cx231xx_start_stream():: ep_mask = 8
[  207.338332] cx231xx #0: cx231xx_dif_set_standard: setStandard to 1000
[  207.414696] cx231xx #0: video_mux : 0
[  207.414702] cx231xx #0: do_mode_ctrl_overrides : 0x1000
[  207.415440] cx231xx #0: do_mode_ctrl_overrides NTSC
[  207.421954] tuner 4-0060: Tuner has no way to set tv freq
[  207.421969] cx231xx #0: vidioc_s_std : 0x1000
[  207.421971] tuner 4-0060: Tuner has no way to set tv freq
[  207.427577] cx231xx #0: do_mode_ctrl_overrides : 0x1000
[  207.428312] cx231xx #0: do_mode_ctrl_overrides NTSC
[  207.507462] cx231xx #0: Enter vidioc_s_frequency()f->frequency=2900;f->type=2
[  207.515705] tuner 4-0060: Tuner has no way to set tv freq
[  207.515708] cx231xx #0: cx231xx_tuner_post_channel_change
dev->tuner_type =083
[  207.517325] cx231xx #0: if_frequency is set to 5400000
[  207.517328] cx231xx #0: Enter cx231xx_set_Colibri_For_LowIF()
[  207.537963] cx231xx #0: colibri_carrier_offset=4832000, standard=0x1000
[  207.537971] cx231xx #0: if_freq=10232000;spectral_invert=0x1;mode=0x1
[  207.540340] cx231xx #0: Enter IF=2489
[  207.555844] cx231xx #0: Set New FREQUENCY to 2900
[  210.794599] cx231xx #0: Enter vidioc_s_frequency()f->frequency=2804;f->type=2
[  210.802958] tuner 4-0060: Tuner has no way to set tv freq
[  210.802962] cx231xx #0: cx231xx_tuner_post_channel_change
dev->tuner_type =083
[  210.804582] cx231xx #0: if_frequency is set to 5400000
[  210.804585] cx231xx #0: Enter cx231xx_set_Colibri_For_LowIF()
[  210.824119] cx231xx #0: colibri_carrier_offset=4832000, standard=0x1000
[  210.824122] cx231xx #0: if_freq=10232000;spectral_invert=0x1;mode=0x1
[  210.826593] cx231xx #0: Enter IF=2489
[  210.840973] cx231xx #0: Set New FREQUENCY to 2804
[  213.461728] cx231xx #0: Enter vidioc_s_frequency()f->frequency=1332;f->type=2
[  213.470088] tuner 4-0060: Tuner has no way to set tv freq
...

Any hints?  I don't have ms-windows machine, but I asked a guy to try
the usb device with the proprietary CD that came with it, and it
worked out out of the box (what a surprise for these things thought
for ms-windows only), so the device is working nice.

I would really appreciate any help you can provide.  BTW:

core/linux 3.0.4-1 (base) [installed]
    The Linux Kernel and modules

extra/v4l-utils 0.8.5-1 [installed]
    Userspace tools and conversion library for Video 4 Linux

community/linuxtv-dvb-apps 1.1.1-4 [installed]
    Viewer programs for DVB cards

community/tvtime 1.0.2-2 [installed]
    A high quality television application for use with video capture cards

I've tried channels scan with scantv,  tvtime and tvtime-scanner.
Neither detect a thing, :-(

Thanks,

-- 
Javier.


[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux