Re: PCMCIA Kernel 2.6

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



On Thu, Jul 15, 2010 at 7:35 PM, Thomas Bächler <thomas@xxxxxxxxxxxxx> wrote:
> Am 15.07.2010 15:51, schrieb Nilesh Govindarajan:
>> I don't think gPXE supports PCMCIA network cards.
>
> Sadly, I think you are right. gPXE would have allowed you to load
> arbitrarily large kernel and initrd images over the network :(
>
>> Leave all that, what
>> am I supposed to do to initialize the PCMCIA card?
>
> Udev does that automatically. Looking at it more closely, I think I was
> wrong. pcmciautils only contains two tools called
> "pcmcia-check-broken-cis" and "pcmcia-socket-startup". The former is
> necessary to enable devices with broken vendor/product id, the latter
> starts up some pcmcia sockets ... it looks like you can live without
> those if your hardware is not broken. Details about pcmcia-specific
> initialization are in /lib/udev/rules.d/60-pcmcia.rules (pcmcia-utils).
>
> Guessing a bit further, it might be that you didn't build your PCMCMIA
> host bridge into your kernel (most of the time it is yenta_socket) and
> therefore don't see your card.
>
>


Yes that was it, yenta_socket enabling recognizes the card, but
doesn't recognize it as an ethernet card (No Initrd, static kernel).

-- 
Regards,
Nilesh Govindarajan
Facebook: http://www.facebook.com/nilesh.gr
Twitter: http://twitter.com/nileshgr
Website: http://www.itech7.com
Cheap and Reliable VPS Hosting: http://j.mp/arHk5e


[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux