How did you get two drives into RAID5 and if so, why? On Apr 29, 2010 7:38 PM, "bardo" <ilbardo@xxxxxxxxx> wrote: 2010/4/29 Caleb Cushing <xenoterracide@xxxxxxxxx>: > On Mon, Apr 26, 2010 at 9:22 PM, Marti Raudsepp <marti@xxxxxxxxx> wrote: >> However, this WD disk ... Just two days ago I built an Arch NAS/HTPC with two 2TB WD Caviar Green WD20EARS (the ones with 4k-sectors). I used the latest iso from build.archlinux.org, the one that Thomas suggested, and everything went happily fine. I used parted's interactive mode to partition, followed by mdadm and mkfs. Parted automatically warned me about an unoptimal sector alignment when I tried to put the first partition at 0 (the first partition should start at 2MB), but if you want to be extra-sure just check the the '-a optimal' parameter. About the disk reliability I can't tell much, but I already transferred some 100GB to it, and of course I had the first RAID5 build, which took a few hours and ran through the whole disk. Also, smartctl doesn't have anything bad to say. HTH, Corrado
