Biru Ionut wrote:
RedShift wrote:
metin wrote:
hi all,
I am having trouble with the new b43 module for my bcm4318 pci
wireless device. I can connect to the internet without a hitch but
the connection drops unexpectedly and randomly even in good
conditions near the wireless modem after a couple of minutes or so;
and it won't connect to the internet again automatically. I tried
ndiswrapper with the same consequences. The interesting point is that
the deprecated module bcm43xx worked flawlessly, but was removed from
the updated kernel 2.6.26.
I desperately need help!
Post a bugreport at http://bugzilla.kernel.org/ Provide as much
details as you can.
Glenn
Also you could read about reporting here:
http://linuxwireless.org/en/users/Drivers/b43#bugreporting
my system related info follows:
ubuntu hardy heron: last updated today
dmesg
lspci
lshw
as attachments.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-19-generic (buildd@terranova) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Fri Jul 11 23:41:49 UTC 2008 (Ubuntu 2.6.24-19.36-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f7d3800 (usable)
[ 0.000000] BIOS-e820: 000000007f7d3800 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] 1143MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 522195) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 522195
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 522195
[ 0.000000] On node 0 totalpages: 522195
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2287 pages used for memmap
[ 0.000000] HighMem zone: 290532 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FC970 checksum 0
[ 0.000000] ACPI: RSDP 000FC970, 0014 (r0 DELL )
[ 0.000000] ACPI: RSDT 7F7D3FD3, 003C (r1 DELL D05 27D60118 ASL 61)
[ 0.000000] ACPI: FACP 7F7D4C00, 0074 (r1 DELL D05 27D60118 ASL 61)
[ 0.000000] ACPI: DSDT 7F7D5800, 324F (r1 INT430 SYSFexxx 1001 MSFT 100000E)
[ 0.000000] ACPI: FACS 7F7E4000, 0040
[ 0.000000] ACPI: APIC 7F7D5400, 0068 (r1 DELL D05 27D60118 ASL 47)
[ 0.000000] ACPI: MCFG 7F7D53C0, 003E (r16 DELL D05 27D60118 ASL 61)
[ 0.000000] ACPI: SSDT 7F7D43E2, 02C2 (r1 PmRef Cpu0Ist 3000 INTL 20030522)
[ 0.000000] ACPI: SSDT 7F7D420A, 01D8 (r1 PmRef Cpu0Cst 3001 INTL 20030522)
[ 0.000000] ACPI: SSDT 7F7D400F, 01FB (r1 PmRef CpuPm 3000 INTL 20030522)
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:13 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 518116
[ 0.000000] Kernel command line: root=UUID=9ea3d252-42be-49ae-aec6-a35b9febe177 ro splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1596.150 MHz processor.
[ 41.808956] Console: colour VGA+ 80x25
[ 41.808960] console [tty0] enabled
[ 41.812930] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 41.813488] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 41.932100] Memory: 2058500k/2088780k available (2177k kernel code, 29004k reserved, 1006k data, 368k init, 1171276k highmem)
[ 41.932208] virtual kernel memory layout:
[ 41.932209] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 41.932211] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 41.932212] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 41.932214] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 41.932215] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 41.932216] .data : 0xc0320474 - 0xc041bdc4 (1006 kB)
[ 41.932218] .text : 0xc0100000 - 0xc0320474 (2177 kB)
[ 41.932723] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 41.932903] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 42.012950] Calibrating delay using timer specific routine.. 3195.82 BogoMIPS (lpj=6391653)
[ 42.013112] Security Framework initialized
[ 42.013182] SELinux: Disabled at boot.
[ 42.013261] AppArmor: AppArmor initialized
[ 42.013325] Failure registering capabilities with primary security module.
[ 42.013401] Mount-cache hash table entries: 512
[ 42.013636] Initializing cgroup subsys ns
[ 42.013704] Initializing cgroup subsys cpuacct
[ 42.013779] CPU: After generic identify, caps: afe9fbbf 00000000 00000000 00000000 00000180 00000000 00000000 00000000
[ 42.013794] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 42.013890] CPU: L2 cache: 2048K
[ 42.013952] CPU: After all inits, caps: afe9fbbf 00000000 00000000 00002040 00000180 00000000 00000000 00000000
[ 42.013963] Compat vDSO mapped to ffffe000.
[ 42.014041] Checking 'hlt' instruction... OK.
[ 42.029426] SMP alternatives: switching to UP code
[ 42.031547] Freeing SMP alternatives: 11k freed
[ 42.031735] Early unpacking initramfs... done
[ 42.435695] ACPI: Core revision 20070126
[ 42.435819] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 42.438375] CPU0: Intel(R) Pentium(R) M processor 1.60GHz stepping 06
[ 42.438531] Total of 1 processors activated (3195.82 BogoMIPS).
[ 42.438787] ENABLING IO-APIC IRQs
[ 42.439040] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 42.584518] Brought up 1 CPUs
[ 42.584603] CPU0 attaching sched-domain:
[ 42.584606] domain 0: span 01
[ 42.584608] groups: 01
[ 42.584788] net_namespace: 64 bytes
[ 42.584856] Booting paravirtualized kernel on bare hardware
[ 42.585407] Time: 14:12:39 Date: 08/14/08
[ 42.585495] NET: Registered protocol family 16
[ 42.585754] EISA bus registered
[ 42.585838] ACPI: bus type pci registered
[ 42.616736] PCI: PCI BIOS revision 2.10 entry at 0xfba7e, last bus=13
[ 42.616804] PCI: Using configuration type 1
[ 42.616879] Setting up standard PCI resources
[ 42.622076] ACPI: EC: Look up EC in DSDT
[ 42.625591] ACPI: Interpreter enabled
[ 42.625653] ACPI: (supports S0 S3 S4 S5)
[ 42.625860] ACPI: Using IOAPIC for interrupt routing
[ 42.638185] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 42.638998] Force enabled HPET at base address 0xfed00000
[ 42.639005] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 42.639075] PCI quirk: region 1080-10bf claimed by ICH6 GPIO
[ 42.639599] PCI: Transparent bridge - 0000:00:1e.0
[ 42.639698] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 42.640183] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 42.640361] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 42.640507] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 42.647389] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[ 42.647725] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[ 42.648059] ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
[ 42.648393] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *7 9 10 11)
[ 42.648790] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 42.649463] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 42.650141] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 42.650843] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 42.650940] pnp: PnP ACPI init
[ 42.651005] ACPI: bus type pnp registered
[ 42.665327] pnpacpi: exceeded the max number of mem resources: 12
[ 42.678178] pnp: PnP ACPI: found 11 devices
[ 42.678242] ACPI: ACPI bus type pnp unregistered
[ 42.678308] PnPBIOS: Disabled by ACPI PNP
[ 42.678584] PCI: Using ACPI for IRQ routing
[ 42.678648] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 42.720363] NET: Registered protocol family 8
[ 42.720426] NET: Registered protocol family 20
[ 42.720655] hpet clockevent registered
[ 42.720663] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 42.720859] hpet0: 3 64-bit timers, 14318180 Hz
[ 42.721957] AppArmor: AppArmor Filesystem Enabled
[ 42.724352] Time: tsc clocksource has been installed.
[ 42.732383] system 00:00: iomem range 0x0-0x9fbff could not be reserved
[ 42.732453] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
[ 42.732523] system 00:00: iomem range 0xc0000-0xcffff could not be reserved
[ 42.732593] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 42.732662] system 00:00: iomem range 0x100000-0x7f7d37ff could not be reserved
[ 42.732751] system 00:00: iomem range 0x7f7d3800-0x7f7fffff could not be reserved
[ 42.732840] system 00:00: iomem range 0x7f800000-0x7fffffff could not be reserved
[ 42.732929] system 00:00: iomem range 0xfeda0000-0xfedfffff could not be reserved
[ 42.733018] system 00:00: iomem range 0xffb00000-0xffffffff could not be reserved
[ 42.733107] system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved
[ 42.733196] system 00:00: iomem range 0xfee00000-0xfee0ffff could not be reserved
[ 42.733285] system 00:00: iomem range 0xfed20000-0xfed9ffff could not be reserved
[ 42.733377] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 42.733445] system 00:02: ioport range 0x1000-0x1005 has been reserved
[ 42.733513] system 00:02: ioport range 0x1008-0x100f has been reserved
[ 42.733585] system 00:03: ioport range 0xf400-0xf4fe has been reserved
[ 42.733653] system 00:03: ioport range 0x1006-0x1007 has been reserved
[ 42.733722] system 00:03: ioport range 0x100a-0x1059 could not be reserved
[ 42.733792] system 00:03: ioport range 0x1060-0x107f has been reserved
[ 42.733860] system 00:03: ioport range 0x1080-0x10bf has been reserved
[ 42.733929] system 00:03: ioport range 0x10c0-0x10df has been reserved
[ 42.733997] system 00:03: ioport range 0x10e0-0x10ff has been reserved
[ 42.734071] system 00:08: ioport range 0x900-0x90f has been reserved
[ 42.734139] system 00:08: ioport range 0x910-0x91f has been reserved
[ 42.734207] system 00:08: ioport range 0x920-0x92f has been reserved
[ 42.734275] system 00:08: ioport range 0x930-0x93f has been reserved
[ 42.734343] system 00:08: ioport range 0x940-0x97f has been reserved
[ 42.764805] PCI: Bridge: 0000:00:1c.0
[ 42.764866] IO window: disabled.
[ 42.764930] MEM window: disabled.
[ 42.764993] PREFETCH window: disabled.
[ 42.765059] PCI: Bridge: 0000:00:1c.3
[ 42.765120] IO window: d000-dfff
[ 42.765184] MEM window: dfc00000-dfdfffff
[ 42.765249] PREFETCH window: d0000000-d01fffff
[ 42.765316] PCI: Bridge: 0000:00:1e.0
[ 42.765376] IO window: disabled.
[ 42.765440] MEM window: dfb00000-dfbfffff
[ 42.765504] PREFETCH window: disabled.
[ 42.765595] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 42.766823] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 42.766846] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 17
[ 42.766970] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 42.766984] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 42.766995] NET: Registered protocol family 2
[ 42.804347] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 42.804654] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 42.805589] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 42.806145] TCP: Hash tables configured (established 131072 bind 65536)
[ 42.806216] TCP reno registered
[ 42.816449] checking if image is initramfs... it is
[ 43.223923] Switched to high resolution mode on CPU 0
[ 43.603826] Freeing initrd memory: 7721k freed
[ 43.604562] audit: initializing netlink socket (disabled)
[ 43.604645] audit(1218723159.568:1): initialized
[ 43.604947] highmem bounce pool size: 64 pages
[ 43.607046] VFS: Disk quotas dquot_6.5.1
[ 43.607192] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 43.607420] io scheduler noop registered
[ 43.607483] io scheduler anticipatory registered
[ 43.607567] io scheduler deadline registered
[ 43.607640] io scheduler cfq registered (default)
[ 43.607715] Boot video device is 0000:00:02.0
[ 43.607922] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 43.607978] assign_interrupt_mode Found MSI capability
[ 43.608090] Allocate Port Service[0000:00:1c.0:pcie00]
[ 43.608133] Allocate Port Service[0000:00:1c.0:pcie02]
[ 43.608251] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 43.608306] assign_interrupt_mode Found MSI capability
[ 43.608412] Allocate Port Service[0000:00:1c.3:pcie00]
[ 43.608449] Allocate Port Service[0000:00:1c.3:pcie02]
[ 43.608706] isapnp: Scanning for PnP cards...
[ 43.962762] isapnp: No Plug & Play device found
[ 43.991182] Real Time Clock Driver v1.12ac
[ 43.991582] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 43.992851] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 43.993013] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 43.993197] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 43.993428] i8042.c: Warning: Keylock active.
[ 43.994922] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 43.994989] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 44.003281] mice: PS/2 mouse device common for all mice
[ 44.003456] EISA: Probing bus 0 at eisa.0
[ 44.003530] Cannot allocate resource for EISA slot 1
[ 44.003625] EISA: Detected 0 cards.
[ 44.003687] cpuidle: using governor ladder
[ 44.003755] cpuidle: using governor menu
[ 44.003915] NET: Registered protocol family 1
[ 44.004004] Using IPI No-Shortcut mode
[ 44.004100] registered taskstats version 1
[ 44.004264] Magic number: 4:715:232
[ 44.004341] hash matches device ttyv2
[ 44.004486] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 44.004552] EDD information not available.
[ 44.004842] Freeing unused kernel memory: 368k freed
[ 44.006630] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 45.249986] fuse init (API version 7.9)
[ 45.272805] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
[ 45.272813] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 45.272826] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 45.277379] ACPI: Thermal Zone [THM] (49 C)
[ 45.950559] usbcore: registered new interface driver usbfs
[ 45.950588] usbcore: registered new interface driver hub
[ 45.953470] usbcore: registered new device driver usb
[ 45.965446] USB Universal Host Controller Interface driver v3.0
[ 45.965513] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 45.965526] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 45.965531] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 45.965927] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 45.965962] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bf80
[ 45.966111] usb usb1: configuration #1 chosen from 1 choice
[ 45.966136] hub 1-0:1.0: USB hub found
[ 45.966142] hub 1-0:1.0: 2 ports detected
[ 46.069439] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 18
[ 46.069457] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 46.069462] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 46.069487] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 46.069521] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000bf60
[ 46.069641] usb usb2: configuration #1 chosen from 1 choice
[ 46.069666] hub 2-0:1.0: USB hub found
[ 46.069672] hub 2-0:1.0: 2 ports detected
[ 46.100186] SCSI subsystem initialized
[ 46.150261] libata version 3.00 loaded.
[ 46.173341] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
[ 46.173356] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 46.173361] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 46.173386] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 46.173421] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000bf40
[ 46.173539] usb usb3: configuration #1 chosen from 1 choice
[ 46.173565] hub 3-0:1.0: USB hub found
[ 46.173571] hub 3-0:1.0: 2 ports detected
[ 46.277235] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 17
[ 46.277249] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 46.277254] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 46.277279] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 46.277314] uhci_hcd 0000:00:1d.3: irq 17, io base 0x0000bf20
[ 46.277433] usb usb4: configuration #1 chosen from 1 choice
[ 46.277458] hub 4-0:1.0: USB hub found
[ 46.277464] hub 4-0:1.0: 2 ports detected
[ 46.381857] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16
[ 46.381875] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 46.381879] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 46.381905] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 46.385810] ehci_hcd 0000:00:1d.7: debug port 1
[ 46.385817] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 46.385824] ehci_hcd 0000:00:1d.7: irq 16, io mem 0xb0000000
[ 46.401080] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 46.401192] usb usb5: configuration #1 chosen from 1 choice
[ 46.401217] hub 5-0:1.0: USB hub found
[ 46.401224] hub 5-0:1.0: 8 ports detected
[ 46.505156] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 17 (level, low) -> IRQ 18
[ 46.524935] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243)
[ 46.524946] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243)
[ 46.524954] ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243)
[ 46.524962] ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243)
[ 46.564937] ssb: Sonics Silicon Backplane found on PCI device 0000:02:03.0
[ 46.565098] ata_piix 0000:00:1f.1: version 2.12
[ 46.565116] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 46.565157] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 46.567540] scsi0 : ata_piix
[ 46.568543] scsi1 : ata_piix
[ 46.569191] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
[ 46.569195] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
[ 46.716735] Clocksource tsc unstable (delta = -1783872090 ns)
[ 46.720759] Time: hpet clocksource has been installed.
[ 46.727936] ata1.00: ATA-6: Hitachi HTS541060G9AT00, MB3OA61A, max UDMA/100
[ 46.727940] ata1.00: 117210240 sectors, multi 8: LBA
[ 46.727971] ata1.01: ATAPI: HL-DT-STCD-RW/DVD-ROM GCC-4244N, B101, max UDMA/33
[ 46.729875] ata1.00: configured for UDMA/100
[ 46.736013] ata1.01: configured for UDMA/33
[ 46.736061] ata2: port disabled. ignoring.
[ 46.736207] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54106 MB3O PQ: 0 ANSI: 5
[ 46.736889] scsi 0:0:1:0: CD-ROM HL-DT-ST CDRW/DVD GCC4244 B101 PQ: 0 ANSI: 5
[ 46.740572] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 19
[ 46.742598] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
[ 46.742606] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
[ 46.742614] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
[ 46.747729] ssb: Sonics Silicon Backplane found on PCI device 0000:02:00.0
[ 46.747750] b44.c:v2.0
[ 46.748984] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:14:22:a6:f7:9f
[ 46.787198] Driver 'sd' needs updating - please use bus_type methods
[ 46.787287] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
[ 46.787300] sd 0:0:0:0: [sda] Write Protect is off
[ 46.787303] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 46.787319] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 46.787368] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
[ 46.787379] sd 0:0:0:0: [sda] Write Protect is off
[ 46.787381] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 46.787397] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 46.787401] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 46.804264] sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 46.805262] sd 0:0:0:0: [sda] Attached SCSI disk
[ 46.811057] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 46.811078] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 46.827019] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 46.827024] Uniform CD-ROM driver Revision: 3.20
[ 46.827076] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 47.111123] kjournald starting. Commit interval 5 seconds
[ 47.111186] EXT3-fs: mounted filesystem with ordered data mode.
[ 50.101302] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 50.669833] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 50.814059] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 50.865563] Linux agpgart interface v0.102
[ 50.933618] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa5a0b1, caps: 0xa04713/0x200000
[ 50.968783] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input3
[ 50.994799] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 51.072271] intel_rng: FWH not detected
[ 51.127144] agpgart: Detected an Intel 915GM Chipset.
[ 51.127777] agpgart: Detected 7932K stolen memory.
[ 51.161632] agpgart: AGP aperture is 256M @ 0xc0000000
[ 51.433127] iTCO_vendor_support: vendor-support=0
[ 51.481130] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 51.481296] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[ 51.481402] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 51.628132] ACPI: AC Adapter [AC] (on-line)
[ 51.955499] ACPI: Battery Slot [BAT0] (battery present)
[ 51.955706] input: Lid Switch as /devices/virtual/input/input4
[ 51.971717] ACPI: Lid Switch [LID]
[ 51.971831] input: Power Button (CM) as /devices/virtual/input/input5
[ 52.003391] ACPI: Power Button (CM) [PBTN]
[ 52.003519] input: Sleep Button (CM) as /devices/virtual/input/input6
[ 52.031373] ACPI: Sleep Button (CM) [SBTN]
[ 52.319143] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 52.319300] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 52.795309] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input7
[ 52.822602] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 52.822833] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input8
[ 52.850567] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
[ 54.003468] udev: renamed network interface eth0 to eth1
[ 54.191319] b43-phy0: Broadcom 4318 WLAN found
[ 54.233180] b43-phy0 debug: Found PHY: Analog 3, Type 2, Revision 7
[ 54.233202] b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 8
[ 54.258424] phy0: Selected rate control algorithm 'simple'
[ 55.451001] lp: driver loaded but no devices found
[ 55.727961] EXT3 FS on sda3, internal journal
[ 55.780862] device-mapper: uevent: version 1.0.3
[ 55.780895] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@xxxxxxxxxx
[ 56.323455] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 56.358386] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 56.427462] NET: Registered protocol family 10
[ 56.427711] lo: Disabled Privacy Extensions
[ 56.442943] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 57.103364] No dock devices found.
[ 58.241114] apm: BIOS not found.
[ 58.343300] ppdev: user-space parallel port driver
[ 58.363150] audit(1218712395.424:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5512 profile="/usr/sbin/cupsd" namespace="default"
[ 117.915313] Marking TSC unstable due to: cpufreq changes.
[ 59.586133] input: b43-phy0 as /devices/virtual/input/input9
[ 59.685995] Bluetooth: Core ver 2.11
[ 59.695387] NET: Registered protocol family 31
[ 59.695392] Bluetooth: HCI device and connection manager initialized
[ 59.695396] Bluetooth: HCI socket layer initialized
[ 59.714084] Bluetooth: L2CAP ver 2.9
[ 59.714088] Bluetooth: L2CAP socket layer initialized
[ 59.801440] Bluetooth: RFCOMM socket layer initialized
[ 59.801459] Bluetooth: RFCOMM TTY layer initialized
[ 59.801461] Bluetooth: RFCOMM ver 1.8
[ 59.872769] b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02)
[ 61.393660] b43-phy0 debug: Chip initialized
[ 61.394091] b43-phy0 debug: 32-bit DMA initialized
[ 61.411846] Registered led device: b43-phy0:tx
[ 61.411868] Registered led device: b43-phy0:rx
[ 61.411888] Registered led device: b43-phy0:radio
[ 61.411923] b43-phy0 debug: Wireless interface started
[ 61.411928] b43-phy0 debug: Adding Interface type 2
[ 61.414890] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 61.444141] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 71.792818] [drm] Initialized drm 1.1.0 20060810
[ 71.796836] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 71.796845] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 71.796919] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 63.821970] b44: eth1: Link is up at 100 Mbps, full duplex.
[ 63.821976] b44: eth1: Flow control is off for TX and off for RX.
[ 63.823478] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 170.834249] NET: Registered protocol family 17
[ 175.301166] eth1: no IPv6 routers present
*-network:0
description: Ethernet interface
product: BCM4401-B0 100Base-TX
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:02:00.0
logical name: eth1
version: 02
serial: 00:14:22:a6:f7:9f
size: 100MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=b44 driverversion=2.0 duplex=full ip=192.168.3.4 latency=64 link=yes module=ssb multicast=yes port=twisted pair speed=100MB/s
*-network:1
description: Network controller
product: BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 3
bus info: pci@0000:02:03.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: bus_master
configuration: driver=b43-pci-bridge latency=64 module=ssb
*-network
description: Wireless interface
physical id: 2
logical name: wlan0
serial: 00:14:a5:8b:21:2e
capabilities: ethernet physical wireless
configuration: broadcast=yes multicast=yes wireless=IEEE 802.11g
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 4 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
02:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
02:03.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
