Can you send me text of that home page,
Because I never seen any home page during
my installation and running apache.
Narendra
-----Original Message-----
From: Ch Praveena
[mailto:ps050202@xxxxxxxxx]
Sent: Friday, April 04, 2008 2:34
PM
To: users@xxxxxxxxxxxxxxxx
Subject: Re: Apache
installation
Hi,
But, when I have installed and runned httpd2.0.63, I could see the home
page with a feather.. And so, I am confused. I have done the configuration at
default. I did not set any Prefix path for the source.
2008/4/4 Narendra Verma <narendra.verma@xxxxxxxxxxxxx>:
Its well if browser is
giving 'Its work' page.
Because it does not give
any home page like tomcat gives.
Narendra
Hi,
I could run apache server(httpd2.2.8), when configured as
default. But, The browser is giving message "It works!", but
not the home page.. Please let me know the reason.
2008/4/4 Ch Praveena <ps050202@xxxxxxxxx>:
Hi all,
I am getting a message like "[Fri Apr 04 12:11:15 2008] [error] [client 10.20.220.15] File does not
exist: /usr/local/apache2/htdocs/favicon.ico" in the error_log file of the
source, while starting the httpd 2..2.8 server. Let me know the reason of
getting this type of error.
2008/4/3 Ch Praveena <ps050202@xxxxxxxxx>:
Hi,
It was again failed and I was getting this 403 forbidden error.
Let me describe you what I have done..
I have deleted both the server source files and started afresh from the
extraction..
followed the steps like:
[root@praveena httpd-2.0.63]# pwd
/home/praveena/software/httpd-2.0.63
[root@praveena httpd-2.0.63]# ./configure
--prefix=/home/praveena/software/src2/
[root@praveena httpd-2.0.63]# make
[root@praveena httpd-2.0.63]# make install
Finally,
[root@praveena /]# /home/praveena/software/src2/bin/apachectl start
But I found 403 forbidden error..
On 03/04/2008, Narendra
Verma <narendra.verma@xxxxxxxxxxxxx> wrote:
Hi just change one more
entry
1.
/export/home/infra/install/httpd-2.0.63/conf/httpd.conf
search for 'Listen' and 'ServerName' use like
Listen 1100
ServerName 192.168.99.29:1100
2.
/export/home/infra/install/ httpd-2.2.8/conf/httpd.conf
Listen 1200
ServerName 192.168.99.29:1200
Note : use IP of your machine.
Narendra
-----Original Message-----
From: Ch Praveena [mailto:ps050202@xxxxxxxxx]
Sent: Thursday, April 03, 2008
2:56 PM
Hi,
Thats great.. But, I am getting an error like http://rifers.org/paste/show/7034
when I ve started the httpd 2.2.8 even after loading at a different location like
./configure --prefix=/home/praveena/software/apache2.2.8src
Please check with the error
On 02/04/2008, Narendra
Verma <narendra.verma@xxxxxxxxxxxxx> wrote:
Hi
Exactly,
This is the path where
you want to store your apache installation rather default location (/usr/local/apache2...)
.
Narendra
-----Original Message-----
From: Ch Praveena [mailto:ps050202@xxxxxxxxx]
Sent: Wednesday, April 02, 2008
6:31 PM
To: users@xxxxxxxxxxxxxxxx
Subject: Re:
Apache installation
Hi,
Do you mean that "/export/home/install/httpd-2.0.63", is the path where my source is about to be stored??
other than under /usr/local/apache2...
On 02/04/2008, Narendra
Verma <narendra.verma@xxxxxxxxxxxxx> wrote:
Hi,
Suppose you
are installing httpd2.0.63 into "/export/home/install/httpd-2.0.63"
You are
having source of httpd2.0.63 like : httpd-2.0.63.tar.gz
$ gzip –d httpd-2.0.63.tar.gz
$ tar xvf httpd-2.0.63.tar
$ cd httpd-2.0.63
$
./configure --prefix= /export/home/install/httpd-2.0.63
$ make
$ make
install
First compete the installation of one version then install another
version.
And you are installing httpd2.2.8 into
"/export/home/install/httpd-2.2.8"
You are
having source of httpd2.2.8 like : httpd-2.2.8.tar.gz
$ gzip –d httpd-2.2.8.tar.gz
$ tar xvf
httpd-2.2.8.tar
$ cd httpd-2.2.8
$
./configure --prefix= /export/home/install/httpd-2.2.8"
$ make
$ make
install
And now
chages the listen port of files :
1.
/export/home/infra/install/httpd-2.0.63/conf/httpd.conf
search for 'Listen' and change it like
Listen 1100
2.
/export/home/infra/install/ httpd-2.2.8/conf/httpd.conf
Listen 1200
Narendra
-----Original Message-----
From: Ch Praveena [mailto:ps050202@xxxxxxxxx]
Sent: Wednesday, April 02, 2008
11:19 AM
Thats great to run
both the servers seperately.
But, let me know where I can change the listen ports and how the command be
replaced. Is it like
$ ./configure --prefix=/home/praveena/software
Please correct the command if any mistakes are there. And I want to run the
httpd 2.0.63 with default ./configure
and then, the next httpd2.2.8 with the above command.
On 02/04/2008, Narendra
Verma <narendra.verma@xxxxxxxxxxxxx> wrote:
Hi,
If you want so then you
can make separate directory (installation root i.e 'prefix') for httpd2.0.63
and 2.2.8 but very important is that your apache listen port must be different
for different installation root.
For uninstalling it just
remove the all content from your installation directory and make a new
installation as you required.It may be giving problem because you upgrade
2.0.63 to 2.2.8.
Just try to make new
installation from scratch for different versions. There may be different idea
for upgrading but I am not fully confident about it.
Narendra
-----Original Message-----
From: Ch Praveena [mailto:ps050202@xxxxxxxxx]
Sent: Wednesday, April 02, 2008
10:42 AM
To: users@xxxxxxxxxxxxxxxx
Subject: Re:
Apache installation
Hi ,
Thank you for your responses..
What I mean is, can I have the both apache servers with our uninstalling them?
But the wrong done by me is, I ve run the ./configure command at the default
only.. I have configured the httpd 2.0.63 version first and later the
httpd2.2.8 version.
Now, Let me know the way, I can run both the servers when ever needed.
If it is not possible, Let me know a command for uninstalling them properly.
On 02/04/2008, Narendra
Verma <narendra.verma@xxxxxxxxxxxxx> wrote:
Hi,
Are u using old compiled
version of mod-jk(That has been compiled with httpd2.0.63) with new
configured/installedS httpd2.2.8,
Just try to reinstall
mod-jk with your new httpd version , it may solve the problem.
Narendra
-----Original Message-----
From: Ch Praveena [mailto:ps050202@xxxxxxxxx]
Sent: Tuesday, April 01, 2008 7:27
PM
To: users@xxxxxxxxxxxxxxxx
Subject: Apache
installation
Hi all,
I have installed and set up httpd 2.0.63 version of apache server and is
running good and fine with the implementaion of clustering
Jboss. And when I want to cluster , there came the need of httpd
2.2.8 version of apache. So, I have downloaded and configured with
default with out giving prefix while running ./configure command.. And so,
there came the problem while running, /usr/local/apache2/bin/apachectl
start with an error
[root@praveena httpd-2.2.8]# /usr/local/apache2/bin/apachectl start
httpd: Syntax error on line 1037 of /usr/local/apache2/conf/httpd.conf: Syntax
error on line 3 of /usr/local/apache2/conf/mod-jk.conf: API module structure
'jk_module' in file /usr/local/apache2/modules/mod_jk.so is garbled - expected
signature 41503232 but saw 41503230 - perhaps this is not an Apache module DSO,
or was compiled for a different Apache version?
If I want to uninstall one among them, will the problem be solved?
Or what is the best command in linux, to be given now..
Please respond at the earliest
--
Regards,
Praveena Chalamcharla,
Securview....
--
Regards,
Praveena Chalamcharla,
Securview....
--
Regards,
Praveena Chalamcharla,
Securview....
--
Regards,
Praveena Chalamcharla,
Securview....
--
Regards,
Praveena Chalamcharla,
Securview....
--
Regards,
Praveena Chalamcharla,
Securview....
--
Regards,
Praveena Chalamcharla,
Securview....
--
Regards,
Praveena Chalamcharla,
Securview....
--
Regards,
Praveena Chalamcharla,
Securview....
|
