Jason,
That smells like CentOS - they mangle the apachectl script, use httpd -S
instead.
You'll want to read the contents of welcome.conf too.
Lastly, you don't need to use mod_rewrite to redirect. It should be your
last absolute resort. Every vhost should have an explicit ServerName set
too.
On 15/10/20 03:22 PM, Jason Long wrote:
> Hello,
> Here is the output of "apachectl -S" command:
>
>
> # apachectl -S
> #
>
>
> And I changed the config as below:
>
>
> <VirtualHost *:80>
> RequestHeader unset X-is-ssl
> RewriteEngine on
> RewriteRule ^(.*)$ https://www.example.net%{REQUEST_URI} [R=permanent,L,NE]
> </VirtualHost>
>
> ## Send all traffic on port 443 which isn't the primary domain to the primary domain
> ## This implicitly picks up the IP for the host, the actual hostname OR the unqualified domain name example.com
>
> <VirtualHost *:443>
> RewriteEngine on
> RewriteRule ^(.*)$ https://www.example.net/%{REQUEST_URI} [R,L,NE]
> </VirtualHost>
>
> <VirtualHost *:443>
> Header always set Strict-Transport-Security "max-age=63072000; includeSubdomains; preload"
> ServerAdmin root@localhost
> ServerName www.example.net
> ServerAlias www.example.net
> ## Do not use Server Alias here for alternative domains - only use for test/dev sites...
> DocumentRoot /var/www/wp
> <Directory "/var/www/wp">
> Options Indexes FollowSymLinks
> AllowOverride all
> Require all granted
> </Directory>
> ErrorLog /var/log/httpd/wordpress_error.log
> CustomLog /var/log/httpd/wordpress_access.log common
> RewriteEngine on
> RewriteCond %{SERVER_NAME} =example.net [OR]
> RewriteCond %{SERVER_NAME} =www.example.net [OR]
> RewriteRule ^ https://%{SERVER_NAME}%{REQUEST_URI} [END,NE,R=permanent]
> Redirect permanent / https://www.example.net
>
> TraceEnable off
> ServerSignature Off
>
> </VirtualHost>
>
>
>
> But, when I restarted Apache service and visit my website then it show me an error about privacy and after it the Apache test page shown.
> I have a SSL conf file too:
>
>
> <IfModule mod_ssl.c>
> <VirtualHost *:443>
> ServerAdmin root@localhost
> ServerName example.net
> ServerAlias www.example.net
> DocumentRoot /var/www/wp
> <Directory "/var/www/wp">
> Options Indexes FollowSymLinks
> AllowOverride all
> Require all granted
> </Directory>
> ErrorLog /var/log/httpd/wordpress_error.log
> CustomLog /var/log/httpd/wordpress_access.log common
> SSLEngine On
> Include /etc/letsencrypt/options-ssl-apache.conf
> SSLCertificateFile /etc/letsencrypt/live/example.net/fullchain.pem
> SSLCertificateKeyFile /etc/letsencrypt/live/example.net/privkey.pem
> </VirtualHost>
> </IfModule>
>
>
> Need it any change too?
>
>
> Thank you.
>
>
>
>
>
>
> On Monday, October 12, 2020, 11:11:11 PM GMT+3:30, Frank <thumbs@xxxxxxxxxx> wrote:
>
>
>
>
>
> Yes, it does: Redirect 301 or RedirectPermanent.
>
> Please review the docs before answering.
>
> On 12/10/20 02:04 PM, James Smith wrote:
>> Redirect doesn't allow you to distinguish between 301s and 302s which you can do with mod_rewrite {very useful feature tbh when it comes to bits like this} - the user is using WordPress so will almost certainly be using mod_rewrite to handle the nice URLs....
>>
>> As for the issue without a server name - you don't need one in the 800 unless you are doing something clever - as for the redirects it doesn't break but you can put one in - just make sure that it is included first!
>> -----Original Message-----
>> From: Frank <thumbs@xxxxxxxxxx>
>> Sent: 12 October 2020 18:10
>> To: users@xxxxxxxxxxxxxxxx
>> Subject: Re: Forwarding IP to HTTPS. [EXT]
>>
>> James,
>>
>> Unless the user has many hosts, I would recommend against using mod_rewrite here. It isn't needed. And your vhost should include an explicity ServerName directive.
>>
>> On 12/10/20 11:56 AM, James Smith wrote:
>>> So I would do this for the virtual host sections – assuming you are
>>> only running ONE externally facing website – there are other things
>>> you would need to do if you were running multiple ones
>>>
>>> ## Send all traffic on port 80 to the primary domain over SSL…
>>>
>>>
>>> <VirtualHost *:80>
>>>
>>> RequestHeader unset X-is-ssl
>>>
>>> RewriteEngine on
>>>
>>> RewriteRule ^(.*)$ https://urldefense.proofpoint.com/v2/url?u=https-3A__www.example.com-25-257BREQUEST-5FURI-257D&d=DwIFaQ&c=D7ByGjS34AllFgecYw0iC6Zq7qlm8uclZFI0SqQnqBo&r=oH2yp0ge1ecj4oDX0XM7vQ&m=ERvrDk3V3OmOKQ_c29so3_jWrThxEfgCkxLIfX3sIvw&s=cugyNGRH0HsECtkleCMZbzrYIt0BcYfZk-Y6c00UdxE&e=
>>> [R=permanent,L,NE]
>>>
>>> </VirtualHost>
>>>
>>>
>>>
>>> ## Send all traffic on port 443 which isn't the primary domain to the
>>> primary domain ## This implicitly picks up the IP for the host, the
>>> actual hostname OR the unqualified domain name example.com
>>>
>>>
>>>
>>> <VirtualHost *:443>
>>>
>>> RewriteEngine on
>>>
>>> RewriteRule ^(.*)$ https://urldefense.proofpoint.com/v2/url?u=https-3A__www.example.com_-25-257BREQUEST-5FURI-257D&d=DwIFaQ&c=D7ByGjS34AllFgecYw0iC6Zq7qlm8uclZFI0SqQnqBo&r=oH2yp0ge1ecj4oDX0XM7vQ&m=ERvrDk3V3OmOKQ_c29so3_jWrThxEfgCkxLIfX3sIvw&s=m4O1DurIDDG4G-kw46brnnEEXNZ9c4pJi52RMgXto3Y&e= [R,L,NE]
>>>
>>> </VirtualHost>
>>>
>>>
>>>
>>> <VirtualHost *:443>
>>>
>>> Header always set Strict-Transport-Security "max-age=63072000;
>>> includeSubdomains; preload"
>>>
>>> ServerAdmin root@localhost
>>>
>>> ServerName
>>> https://urldefense.proofpoint.com/v2/url?u=http-3A__www.example.com&d=
>>> DwIFaQ&c=D7ByGjS34AllFgecYw0iC6Zq7qlm8uclZFI0SqQnqBo&r=oH2yp0ge1ecj4oD
>>> X0XM7vQ&m=ERvrDk3V3OmOKQ_c29so3_jWrThxEfgCkxLIfX3sIvw&s=mw3MrVOeeCL66Y
>>> rcxABO8NMrnnmzLmHQBeAdm0m8VYA&e=
>>>
>>> ## Do not use Server Alias here for alternative domains - only use
>>> for test/dev sites...
>>>
>>> DocumentRoot /var/www/wp
>>>
>>> <Directory "/var/www/wp">
>>>
>>> Options Indexes FollowSymLinks
>>>
>>> AllowOverride all
>>>
>>> Require all granted
>>>
>>> </Directory>
>>>
>>>
>>>
>>> ## Put the rest of your wordpress stuff here...
>>>
>>> </VirtualHost>
>>>
>>>
>>>
>>> *From:*Jason Long <hack3rcon@xxxxxxxxx.INVALID>
>>> *Sent:* 12 October 2020 16:39
>>> *To:* users@xxxxxxxxxxxxxxxx
>>> *Subject:* Re: Forwarding IP to HTTPS. [EXT]
>>>
>>>
>>>
>>> Excuse me,
>>>
>>> Can you clean my configuration?
>>>
>>>
>>>
>>> On Monday, October 12, 2020, 07:06:17 PM GMT+3:30, Frank
>>> <thumbs@xxxxxxxxxx <mailto:thumbs@xxxxxxxxxx>> wrote:
>>>
>>>
>>>
>>>
>>>
>>> James,
>>>
>>> Omitting an explicit ServerName in name-based vhosts is a bad idea as
>>> well. You can create conflicts or ambiguities.
>>>
>>>
>>> On 12/10/20 11:22 AM, James Smith wrote:
>>>> This would be my set-up in your case - note as someone said it was too complex I've removed the extra security bits I'd left in by accident...
>>>>
>>>> ## Port 80 && 443 default configs...
>>>>
>>>> <VirtualHost *:80>
>>>> RequestHeader unset X-is-ssl
>>>> RewriteEngine on
>>>> RewriteRule ^(.*)$ https://urldefense.proofpoint.com/v2/url?u=https-3A__www.mydomain.com-25&d=DwIFaQ&c=D7ByGjS34AllFgecYw0iC6Zq7qlm8uclZFI0SqQnqBo&r=oH2yp0ge1ecj4oDX0XM7vQ&m=ERvrDk3V3OmOKQ_c29so3_jWrThxEfgCkxLIfX3sIvw&s=A8EKvfUUPo1cemy_DRQyzWH7n8UvFx5myg5M7r0b380&e= [mydomain.com%]
>>> <https://urldefense.proofpoint.com/v2/url?u=https-3A__www.mydomain.com
>>> -25&d=DwMFaQ&c=D7ByGjS34AllFgecYw0iC6Zq7qlm8uclZFI0SqQnqBo&r=oH2yp0ge1
>>> ecj4oDX0XM7vQ&m=aSXzAFTQK2MqTd4h8-yDESDKjJwJfq6x0sy97DB2Dlg&s=rP2yXysk
>>> ai3avho4gNa3ivaQdP6NyvIGOONKga7UWLA&e=>{REQUEST_URI}
>>> [R=permanent,L,NE]
>>>> </VirtualHost>
>>>>
>>>> <VirtualHost *:443>
>>>> RewriteEngine on
>>>> RewriteRule ^(.*)$ https://urldefense.proofpoint.com/v2/url?u=https-3A__www.mydomain.com_-25&d=DwIFaQ&c=D7ByGjS34AllFgecYw0iC6Zq7qlm8uclZFI0SqQnqBo&r=oH2yp0ge1ecj4oDX0XM7vQ&m=ERvrDk3V3OmOKQ_c29so3_jWrThxEfgCkxLIfX3sIvw&s=ueoNZtVbLE1sHVM3T0rcs5Nc_sLHgqvUtNtezSaLZIo&e= [mydomain.com]
>>> <https://urldefense.proofpoint.com/v2/url?u=https-3A__www.mydomain.com
>>> _-25&d=DwMFaQ&c=D7ByGjS34AllFgecYw0iC6Zq7qlm8uclZFI0SqQnqBo&r=oH2yp0ge
>>> 1ecj4oDX0XM7vQ&m=aSXzAFTQK2MqTd4h8-yDESDKjJwJfq6x0sy97DB2Dlg&s=0xY2vrA
>>> mBv9NS93So6uL5BSAVrWQQPPc8fQe6cF_oHo&e=>{REQUEST_URI}
>>> [R,L,NE]
>>>> </VirtualHost>
>>>>
>>>> ## Port 443 default - this is our main server...... so your main apache config stuff should be in here with SSL configured correctly..
>>>>
>>>> <VirtualHost *:443>
>>>> ServerName
>>>> https://urldefense.proofpoint.com/v2/url?u=http-3A__www.mydomain.com&d=DwIFaQ&c=D7ByGjS34AllFgecYw0iC6Zq7qlm8uclZFI0SqQnqBo&r=oH2yp0ge1ecj4oDX0XM7vQ&m=ERvrDk3V3OmOKQ_c29so3_jWrThxEfgCkxLIfX3sIvw&s=Pq870e0oOU5bb6s-jPfEyYU__hJUeQOHvv1AZX--fP0&e= <https://urldefense.proofpoint.com/v2/url?u=http-3A__www.mydomain.com&d=DwIFaQ&c=D7ByGjS34AllFgecYw0iC6Zq7qlm8uclZFI0SqQnqBo&r=oH2yp0ge1ecj4oDX0XM7vQ&m=ERvrDk3V3OmOKQ_c29so3_jWrThxEfgCkxLIfX3sIvw&s=Pq870e0oOU5bb6s-jPfEyYU__hJUeQOHvv1AZX--fP0&e= > ...
>>>> ...
>>>> ...
>>>> ...
>>>> ...
>>>> </VirtualHost>
>>>>
>>>> If you have more than one domain then you will need to add rules on
>>>> port 80 to preserve the hostname & also blocks for each additional
>>>> domain
>>>>
>>>>
>>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: users-unsubscribe@xxxxxxxxxxxxxxxx
>>> <mailto:users-unsubscribe@xxxxxxxxxxxxxxxx>
>>> For additional commands, e-mail: users-help@xxxxxxxxxxxxxxxx
>>> <mailto:users-help@xxxxxxxxxxxxxxxx>
>>>
>>> -- The Wellcome Sanger Institute is operated by Genome Research
>>> Limited, a charity registered in England with number 1021457 and a
>>> company registered in England with number 2742969, whose registered
>>> office is
>>> 215 Euston Road, London, NW1 2BE.
>
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: users-unsubscribe@xxxxxxxxxxxxxxxx
>> For additional commands, e-mail: users-help@xxxxxxxxxxxxxxxx
>>
>>
>>
>>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@xxxxxxxxxxxxxxxx
> For additional commands, e-mail: users-help@xxxxxxxxxxxxxxxx
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@xxxxxxxxxxxxxxxx
> For additional commands, e-mail: users-help@xxxxxxxxxxxxxxxx
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: users-help@xxxxxxxxxxxxxxxx
|