As a full disclaimer I don't use 2.4.9 so I set it up on a virtual
machine to test out. I am getting the same error apparently due to not
having a favicon.ico. I'm willing to bet the situation is the same for
you and that would be where I would start to correct the error or just
disregard it.
On 09/29/2014 08:11 AM, James B. Byrne wrote:
> On Mon, September 29, 2014 07:00, Edgar Pettijohn wrote:
>> The problem is most likely in the config somewhere, but we will never
>> know if you don't post the entire httpd.conf.
>>
> Here is a diff between the active and the original (as distributed with the
> source tarball) httpd.conf for httpd-2.4.9:
>
>
> # diff httpd.conf original/httpd.conf
> 11,23c11
> < # consult the online docs. You have been warned.
> <
> < # CentOS-6 note
> < # Many of the directives formerly contained in this file are now
> < # broken out into individual configuration files in /etc/httpd/conf/extra.
> < # The Include statements for these files are found at the end of this one.
> <
> < #
> < # Don't give away too much information about all the subcomponents
> < # we are running. Comment out this line if you don't mind remote sites
> < # finding out what major optional modules you are running
> < ServerTokens OS
> <
> ---
>> # consult the online docs. You have been warned.
> 43,51c31
> < ServerRoot "/etc/httpd"
> <
> < #
> < # PidFile: The file in which the server should record its process
> < # identification number when it starts. Note the PIDFILE variable in
> < # /etc/sysconfig/httpd must be set appropriately if this location is
> < # changed.
> < #
> < PidFile run/httpd.pid
> ---
>> ServerRoot "/usr"
> 64,123d43
> < # Timeout: The number of seconds before receives and sends time out.
> < #
> < Timeout 60
> <
> < #
> < # KeepAlive: Whether or not to allow persistent connections (more than
> < # one request per connection). Set to "Off" to deactivate.
> < #
> < KeepAlive Off
> <
> < #
> < # MaxKeepAliveRequests: The maximum number of requests to allow
> < # during a persistent connection. Set to 0 to allow an unlimited amount.
> < # We recommend you leave this number high, for maximum performance.
> < #
> < MaxKeepAliveRequests 100
> <
> < #
> < # KeepAliveTimeout: Number of seconds to wait for the next request from the
> < # same client on the same connection.
> < #
> < KeepAliveTimeout 15
> <
> < ##
> < ## Server-Pool Size Regulation (MPM specific)
> < ##
> <
> < # prefork MPM
> < # StartServers: number of server processes to start
> < # MinSpareServers: minimum number of server processes which are kept spare
> < # MaxSpareServers: maximum number of server processes which are kept spare
> < # ServerLimit: maximum value for MaxClients for the lifetime of the server
> < # MaxClients: maximum number of server processes allowed to start
> < # MaxRequestsPerChild: maximum number of requests a server process serves
> < <IfModule prefork.c>
> < StartServers 8
> < MinSpareServers 5
> < MaxSpareServers 20
> < ServerLimit 256
> < MaxClients 256
> < MaxRequestsPerChild 4000
> < </IfModule>
> <
> < # worker MPM
> < # StartServers: initial number of server processes to start
> < # MaxClients: maximum number of simultaneous client connections
> < # MinSpareThreads: minimum number of worker threads which are kept spare
> < # MaxSpareThreads: maximum number of worker threads which are kept spare
> < # ThreadsPerChild: constant number of worker threads in each server process
> < # MaxRequestsPerChild: maximum number of requests a server process serves
> < <IfModule worker.c>
> < StartServers 4
> < MaxClients 300
> < MinSpareThreads 25
> < MaxSpareThreads 75
> < ThreadsPerChild 25
> < MaxRequestsPerChild 0
> < </IfModule>
> <
> < #
> 146,255c66,174
> < LoadModule access_compat_module modules/mod_access_compat.so
> < #LoadModule actions_module modules/mod_actions.so
> < LoadModule alias_module modules/mod_alias.so
> < #LoadModule allowmethods_module modules/mod_allowmethods.so
> < #LoadModule asis_module modules/mod_asis.so
> < LoadModule auth_basic_module modules/mod_auth_basic.so
> < LoadModule auth_digest_module modules/mod_auth_digest.so
> < #LoadModule auth_form_module modules/mod_auth_form.so
> < #LoadModule authn_anon_module modules/mod_authn_anon.so
> < LoadModule authn_core_module modules/mod_authn_core.so
> < #LoadModule authn_dbd_module modules/mod_authn_dbd.so
> < #LoadModule authn_dbm_module modules/mod_authn_dbm.so
> < LoadModule authn_file_module modules/mod_authn_file.so
> < #LoadModule authn_socache_module modules/mod_authn_socache.so
> < #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
> < LoadModule authz_core_module modules/mod_authz_core.so
> < #LoadModule authz_dbd_module modules/mod_authz_dbd.so
> < #LoadModule authz_dbm_module modules/mod_authz_dbm.so
> < LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
> < LoadModule authz_host_module modules/mod_authz_host.so
> < #LoadModule authz_owner_module modules/mod_authz_owner.so
> < LoadModule authz_user_module modules/mod_authz_user.so
> < LoadModule autoindex_module modules/mod_autoindex.so
> < #LoadModule bucketeer_module modules/mod_bucketeer.so
> < #LoadModule buffer_module modules/mod_buffer.so
> < #LoadModule cache_disk_module modules/mod_cache_disk.so
> < #LoadModule cache_module modules/mod_cache.so
> < #LoadModule cache_socache_module modules/mod_cache_socache.so
> < #LoadModule case_filter_in_module modules/mod_case_filter_in.so
> < #LoadModule case_filter_module modules/mod_case_filter.so
> < #LoadModule cgid_module modules/mod_cgid.so
> < #LoadModule charset_lite_module modules/mod_charset_lite.so
> < #LoadModule data_module modules/mod_data.so
> < #LoadModule dav_lock_module modules/mod_dav_lock.so
> < LoadModule dav_module modules/mod_dav.so
> < # This one has to follow dav_module
> < LoadModule dav_fs_module modules/mod_dav_fs.so
> < #LoadModule dbd_module modules/mod_dbd.so
> < #LoadModule deflate_module modules/mod_deflate.so
> < #LoadModule dialup_module modules/mod_dialup.so
> < LoadModule dir_module modules/mod_dir.so
> < #LoadModule dumpio_module modules/mod_dumpio.so
> < #LoadModule echo_module modules/mod_echo.so
> < LoadModule env_module modules/mod_env.so
> < #LoadModule expires_module modules/mod_expires.so
> < #LoadModule ext_filter_module modules/mod_ext_filter.so
> < #LoadModule file_cache_module modules/mod_file_cache.so
> < LoadModule filter_module modules/mod_filter.so
> < LoadModule headers_module modules/mod_headers.so
> < #LoadModule heartbeat_module modules/mod_heartbeat.so
> < #LoadModule heartmonitor_module modules/mod_heartmonitor.so
> < #LoadModule include_module modules/mod_include.so
> < #LoadModule info_module modules/mod_info.so
> < #LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
> < #LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
> < #LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
> < #LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
> < #LoadModule ldap_module modules/mod_ldap.so
> < LoadModule log_config_module modules/mod_log_config.so
> < #LoadModule log_debug_module modules/mod_log_debug.so
> < #LoadModule log_forensic_module modules/mod_log_forensic.so
> < #LoadModule logio_module modules/mod_logio.so
> < #LoadModule lua_module modules/mod_lua.so
> < #LoadModule macro_module modules/mod_macro.so
> < LoadModule mime_magic_module modules/mod_mime_magic.so
> < LoadModule mime_module modules/mod_mime.so
> < LoadModule mpm_event_module modules/mod_mpm_event.so
> < #LoadModule negotiation_module modules/mod_negotiation.so
> < #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
> < #LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
> < #LoadModule proxy_connect_module modules/mod_proxy_connect.so
> < #LoadModule proxy_express_module modules/mod_proxy_express.so
> < #LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
> < #LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
> < #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
> < #LoadModule proxy_html_module modules/mod_proxy_html.so
> < #LoadModule proxy_http_module modules/mod_proxy_http.so
> < #LoadModule proxy_module modules/mod_proxy.so
> < #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
> < #LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
> < #LoadModule ratelimit_module modules/mod_ratelimit.so
> < #LoadModule reflector_module modules/mod_reflector.so
> < #LoadModule remoteip_module modules/mod_remoteip.so
> < LoadModule reqtimeout_module modules/mod_reqtimeout.so
> < #LoadModule request_module modules/mod_request.so
> < LoadModule rewrite_module modules/mod_rewrite.so
> < #LoadModule sed_module modules/mod_sed.so
> < #LoadModule session_cookie_module modules/mod_session_cookie.so
> < #LoadModule session_crypto_module modules/mod_session_crypto.so
> < #LoadModule session_dbd_module modules/mod_session_dbd.so
> < #LoadModule session_module modules/mod_session.so
> < LoadModule setenvif_module modules/mod_setenvif.so
> < #LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
> < #LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
> < #LoadModule socache_dbm_module modules/mod_socache_dbm.so
> < #LoadModule socache_memcache_module modules/mod_socache_memcache.so
> < #LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
> < #LoadModule speling_module modules/mod_speling.so
> < LoadModule ssl_module modules/mod_ssl.so
> < LoadModule status_module modules/mod_status.so
> < #LoadModule substitute_module modules/mod_substitute.so
> < #LoadModule suexec_module modules/mod_suexec.so
> < #LoadModule unique_id_module modules/mod_unique_id.so
> < LoadModule unixd_module modules/mod_unixd.so
> < #LoadModule userdir_module modules/mod_userdir.so
> < #LoadModule usertrack_module modules/mod_usertrack.so
> < LoadModule version_module modules/mod_version.so
> < #LoadModule vhost_alias_module modules/mod_vhost_alias.so
> < #LoadModule watchdog_module modules/mod_watchdog.so
> < #LoadModule xml2enc_module modules/mod_xml2enc.so
> ---
>> LoadModule authn_file_module lib64/httpd/modules/mod_authn_file.so
>> #LoadModule authn_dbm_module lib64/httpd/modules/mod_authn_dbm.so
>> #LoadModule authn_anon_module lib64/httpd/modules/mod_authn_anon.so
>> #LoadModule authn_dbd_module lib64/httpd/modules/mod_authn_dbd.so
>> #LoadModule authn_socache_module lib64/httpd/modules/mod_authn_socache.so
>> LoadModule authn_core_module lib64/httpd/modules/mod_authn_core.so
>> LoadModule authz_host_module lib64/httpd/modules/mod_authz_host.so
>> LoadModule authz_groupfile_module lib64/httpd/modules/mod_authz_groupfile.so
>> LoadModule authz_user_module lib64/httpd/modules/mod_authz_user.so
>> #LoadModule authz_dbm_module lib64/httpd/modules/mod_authz_dbm.so
>> #LoadModule authz_owner_module lib64/httpd/modules/mod_authz_owner.so
>> #LoadModule authz_dbd_module lib64/httpd/modules/mod_authz_dbd.so
>> LoadModule authz_core_module lib64/httpd/modules/mod_authz_core.so
>> #LoadModule authnz_ldap_module lib64/httpd/modules/mod_authnz_ldap.so
>> LoadModule access_compat_module lib64/httpd/modules/mod_access_compat.so
>> LoadModule auth_basic_module lib64/httpd/modules/mod_auth_basic.so
>> #LoadModule auth_form_module lib64/httpd/modules/mod_auth_form.so
>> #LoadModule auth_digest_module lib64/httpd/modules/mod_auth_digest.so
>> #LoadModule allowmethods_module lib64/httpd/modules/mod_allowmethods.so
>> #LoadModule file_cache_module lib64/httpd/modules/mod_file_cache.so
>> #LoadModule cache_module lib64/httpd/modules/mod_cache.so
>> #LoadModule cache_disk_module lib64/httpd/modules/mod_cache_disk.so
>> #LoadModule cache_socache_module lib64/httpd/modules/mod_cache_socache.so
>> #LoadModule socache_shmcb_module lib64/httpd/modules/mod_socache_shmcb.so
>> #LoadModule socache_dbm_module lib64/httpd/modules/mod_socache_dbm.so
>> #LoadModule socache_memcache_module lib64/httpd/modules/mod_socache_memcache.so
>> #LoadModule watchdog_module lib64/httpd/modules/mod_watchdog.so
>> #LoadModule macro_module lib64/httpd/modules/mod_macro.so
>> #LoadModule dbd_module lib64/httpd/modules/mod_dbd.so
>> #LoadModule bucketeer_module lib64/httpd/modules/mod_bucketeer.so
>> #LoadModule dumpio_module lib64/httpd/modules/mod_dumpio.so
>> #LoadModule echo_module lib64/httpd/modules/mod_echo.so
>> #LoadModule case_filter_module lib64/httpd/modules/mod_case_filter.so
>> #LoadModule case_filter_in_module lib64/httpd/modules/mod_case_filter_in.so
>> #LoadModule buffer_module lib64/httpd/modules/mod_buffer.so
>> #LoadModule data_module lib64/httpd/modules/mod_data.so
>> #LoadModule ratelimit_module lib64/httpd/modules/mod_ratelimit.so
>> LoadModule reqtimeout_module lib64/httpd/modules/mod_reqtimeout.so
>> #LoadModule ext_filter_module lib64/httpd/modules/mod_ext_filter.so
>> #LoadModule request_module lib64/httpd/modules/mod_request.so
>> #LoadModule include_module lib64/httpd/modules/mod_include.so
>> LoadModule filter_module lib64/httpd/modules/mod_filter.so
>> #LoadModule reflector_module lib64/httpd/modules/mod_reflector.so
>> #LoadModule substitute_module lib64/httpd/modules/mod_substitute.so
>> #LoadModule sed_module lib64/httpd/modules/mod_sed.so
>> #LoadModule charset_lite_module lib64/httpd/modules/mod_charset_lite.so
>> #LoadModule deflate_module lib64/httpd/modules/mod_deflate.so
>> #LoadModule xml2enc_module lib64/httpd/modules/mod_xml2enc.so
>> #LoadModule proxy_html_module lib64/httpd/modules/mod_proxy_html.so
>> LoadModule mime_module lib64/httpd/modules/mod_mime.so
>> #LoadModule ldap_module lib64/httpd/modules/mod_ldap.so
>> LoadModule log_config_module lib64/httpd/modules/mod_log_config.so
>> #LoadModule log_debug_module lib64/httpd/modules/mod_log_debug.so
>> #LoadModule log_forensic_module lib64/httpd/modules/mod_log_forensic.so
>> #LoadModule logio_module lib64/httpd/modules/mod_logio.so
>> #LoadModule lua_module lib64/httpd/modules/mod_lua.so
>> LoadModule env_module lib64/httpd/modules/mod_env.so
>> #LoadModule mime_magic_module lib64/httpd/modules/mod_mime_magic.so
>> #LoadModule expires_module lib64/httpd/modules/mod_expires.so
>> LoadModule headers_module lib64/httpd/modules/mod_headers.so
>> #LoadModule usertrack_module lib64/httpd/modules/mod_usertrack.so
>> #LoadModule unique_id_module lib64/httpd/modules/mod_unique_id.so
>> LoadModule setenvif_module lib64/httpd/modules/mod_setenvif.so
>> LoadModule version_module lib64/httpd/modules/mod_version.so
>> #LoadModule remoteip_module lib64/httpd/modules/mod_remoteip.so
>> #LoadModule proxy_module lib64/httpd/modules/mod_proxy.so
>> #LoadModule proxy_connect_module lib64/httpd/modules/mod_proxy_connect.so
>> #LoadModule proxy_ftp_module lib64/httpd/modules/mod_proxy_ftp.so
>> #LoadModule proxy_http_module lib64/httpd/modules/mod_proxy_http.so
>> #LoadModule proxy_fcgi_module lib64/httpd/modules/mod_proxy_fcgi.so
>> #LoadModule proxy_scgi_module lib64/httpd/modules/mod_proxy_scgi.so
>> #LoadModule proxy_fdpass_module lib64/httpd/modules/mod_proxy_fdpass.so
>> #LoadModule proxy_wstunnel_module lib64/httpd/modules/mod_proxy_wstunnel.so
>> #LoadModule proxy_ajp_module lib64/httpd/modules/mod_proxy_ajp.so
>> #LoadModule proxy_balancer_module lib64/httpd/modules/mod_proxy_balancer.so
>> #LoadModule proxy_express_module lib64/httpd/modules/mod_proxy_express.so
>> #LoadModule session_module lib64/httpd/modules/mod_session.so
>> #LoadModule session_cookie_module lib64/httpd/modules/mod_session_cookie.so
>> #LoadModule session_crypto_module lib64/httpd/modules/mod_session_crypto.so
>> #LoadModule session_dbd_module lib64/httpd/modules/mod_session_dbd.so
>> #LoadModule slotmem_shm_module lib64/httpd/modules/mod_slotmem_shm.so
>> #LoadModule slotmem_plain_module lib64/httpd/modules/mod_slotmem_plain.so
>> #LoadModule ssl_module lib64/httpd/modules/mod_ssl.so
>> #LoadModule dialup_module lib64/httpd/modules/mod_dialup.so
>> #LoadModule lbmethod_byrequests_module
> lib64/httpd/modules/mod_lbmethod_byrequests.so
>> #LoadModule lbmethod_bytraffic_module
> lib64/httpd/modules/mod_lbmethod_bytraffic.so
>> #LoadModule lbmethod_bybusyness_module
> lib64/httpd/modules/mod_lbmethod_bybusyness.so
>> #LoadModule lbmethod_heartbeat_module
> lib64/httpd/modules/mod_lbmethod_heartbeat.so
>> LoadModule mpm_event_module lib64/httpd/modules/mod_mpm_event.so
>> LoadModule unixd_module lib64/httpd/modules/mod_unixd.so
>> #LoadModule heartbeat_module lib64/httpd/modules/mod_heartbeat.so
>> #LoadModule heartmonitor_module lib64/httpd/modules/mod_heartmonitor.so
>> #LoadModule dav_module lib64/httpd/modules/mod_dav.so
>> LoadModule status_module lib64/httpd/modules/mod_status.so
>> LoadModule autoindex_module lib64/httpd/modules/mod_autoindex.so
>> #LoadModule asis_module lib64/httpd/modules/mod_asis.so
>> #LoadModule info_module lib64/httpd/modules/mod_info.so
>> #LoadModule suexec_module lib64/httpd/modules/mod_suexec.so
>> #LoadModule cgid_module lib64/httpd/modules/mod_cgid.so
>> #LoadModule dav_fs_module lib64/httpd/modules/mod_dav_fs.so
>> #LoadModule dav_lock_module lib64/httpd/modules/mod_dav_lock.so
>> #LoadModule vhost_alias_module lib64/httpd/modules/mod_vhost_alias.so
>> #LoadModule negotiation_module lib64/httpd/modules/mod_negotiation.so
>> LoadModule dir_module lib64/httpd/modules/mod_dir.so
>> #LoadModule actions_module lib64/httpd/modules/mod_actions.so
>> #LoadModule speling_module lib64/httpd/modules/mod_speling.so
>> #LoadModule userdir_module lib64/httpd/modules/mod_userdir.so
>> LoadModule alias_module lib64/httpd/modules/mod_alias.so
>> #LoadModule rewrite_module lib64/httpd/modules/mod_rewrite.so
> 266,269c185,186
> < #User daemon
> < #Group daemon
> < User apache
> < Group apache
> ---
>> User daemon
>> Group daemon
> 273,288d189
> < #
> < # Load optional config files from the config directory "/etc/httpd/conf.d".
> < #
> < IncludeOptional conf.d/*.conf
> < # If conf.d/*.conf files are required (not optional) for your installation
> < # then use:
> < Include conf.d/*.conf
> <
> < #
> < # ExtendedStatus controls whether Apache will generate "full" status
> < # information (ExtendedStatus On) or just basic information (ExtendedStatus
> < # Off) when the "server-status" handler is called. The default is Off.
> < #
> < #ExtendedStatus On
> < #ExtendedStatus Off
> <
> 323,324c224,225
> < # AllowOverride none
> < # Require all denied
> ---
>> AllowOverride none
>> Require all denied
> 327,337d227
> < #<Directory />
> < # Options None
> < # AllowOverride None
> < # Require all denied
> < # Order deny,allow
> < # deny from all
> < # <LimitExcept GET POST>
> < # deny from all
> < # </limitexcept>
> < #</Directory>
> <
> 346,354d235
> < # UseCanonicalName: Determines how Apache constructs self-referencing
> < # URLs and the SERVER_NAME and SERVER_PORT variables.
> < # When set "Off", Apache will use the Hostname and Port supplied
> < # by the client. When set "On", Apache will use the value of the
> < # ServerName directive.
> < #
> < UseCanonicalName Off
> <
> < #
> 360,371d240
> <
> < #
> < # Each directory to which Apache has access can be configured with respect
> < # to which services and features are allowed and/or disabled in that
> < # directory (and its subdirectories).
> < #
> < <Directory "/var/www/error">
> < Options Indexes
> < AllowOverride None
> < Require all granted
> < </Directory>
> <
> 401,445d269
> < # UserDir: The name of the directory that is appended onto a user's home
> < # directory if a ~user request is received.
> < #
> < # The path to the end user account 'public_html' directory must be
> < # accessible to the webserver userid. This usually means that ~userid
> < # must have permissions of 711, ~userid/public_html must have permissions
> < # of 755, and documents contained therein must be world-readable.
> < # Otherwise, the client will only receive a "403 Forbidden" message.
> < #
> < # See also: http://httpd.apache.org/docs/misc/FAQ.html#forbidden
> < #
> < <IfModule mod_userdir.c>
> < #
> < # UserDir is disabled by default since it can confirm the presence
> < # of a username on the system (depending on home directory
> < # permissions).
> < #
> < UserDir disabled
> <
> < #
> < # To enable requests to /~user/ to serve the user's public_html
> < # directory, remove the "UserDir disabled" line above, and uncomment
> < # the following line instead:
> < #
> < #UserDir public_html
> < </IfModule>
> <
> < #
> < # Control access to UserDir directories. The following is an example
> < # for a site where these directories are restricted to read-only.
> < #
> < #<Directory /home/*/public_html>
> < # AllowOverride FileInfo AuthConfig Limit
> < # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
> < # <Limit GET POST OPTIONS>
> < # Order allow,deny
> < # Allow from all
> < # </Limit>
> < # <LimitExcept GET POST OPTIONS>
> < # Order deny,allow
> < # Deny from all
> < # </LimitExcept>
> < #</Directory>
> <
> < #
> 449,453d272
> < # The index.html.var file (a type-map) is used to deliver content-
> < # negotiated documents. The MultiViews Option can be used for the
> < # same purpose, but it is much slower.
> < #
> <
> 455,458c274
> < #
> < # DirectoryIndex index.html
> < DirectoryIndex index.html index.html.var
> <
> ---
>> DirectoryIndex index.html
> 462,468d277
> < # AccessFileName: The name of the file to look for in each directory
> < # for additional configuration directives. See also the AllowOverride
> < # directive.
> < #
> < AccessFileName .htaccess
> <
> < #
> 470,475c279
> < # viewed by Web clients. Note that the condition string is NOT a regexp
> < # but a simple glob ? match one character, * matches zero or more,
> < # all other characters, including '.', match themselves. For example:
> < # <Files "?at.*">
> < # This would apply to cat.html, bat.html, hat.php and so on.
> < # </Files>
> ---
>> # viewed by Web clients.
> 488c292
> < ErrorLog "/var/log/httpd/Apache_default_error_log"
> ---
>> ErrorLog "/var/log/httpd/error_log"
> 517c321
> < CustomLog "/var/log/httpd/Apache_default_access_log" common
> ---
>> CustomLog "/var/log/httpd/access_log" common
> 544d347
> < Alias /error "/var/www/error"
> 554a358
> 581d384
> < # Note that RedHatEL6 provides and uses a different mime.types file in
> /etc
> 628,639d430
> < <IfModule mod_mime_magic.c>
> < #MIMEMagicFile /etc/httpd/conf/magic
> < MIMEMagicFile conf/magic
> < </IfModule>
> <
> < #
> < # HostnameLookups: Log the names of clients or just their IP addresses
> < # e.g., www.apache.org (on) or 204.62.129.132 (off).
> < # The default is off because it'd be overall better for the net if people
> < # had to knowingly turn this feature on, since enabling it means that
> < # each client request will result in AT LEAST one lookup request to the
> < # nameserver. Allowed values On | Off | Double
> 641c432
> < HostnameLookups Off
> ---
>> #MIMEMagicFile /etc/httpd/conf/magic
> 643d433
> < # Also See Below: # Multi-language error messages
> 671,672c461,462
> < #EnableMMAP Off
> < #EnableSendfile On
> ---
>> #EnableMMAP off
>> #EnableSendfile on
> 688c478
> < Include /etc/httpd/conf/extra/httpd-autoindex.conf
> ---
>> #Include /etc/httpd/conf/extra/httpd-autoindex.conf
> 701d490
> < Include /etc/httpd/virtual.d/*.conf
> 717a507
>> #Include /etc/httpd/conf/extra/httpd-ssl.conf
> 724,728c514,515
> < SSLRandomSeed startup builtin
> < SSLRandomSeed connect builtin
> < <IfModule !mod_socache_shmcb>
> < LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
> < </IfModule>
> ---
>> SSLRandomSeed startup builtin
>> SSLRandomSeed connect builtin
> 730,733d516
> <
> < # Uncomment this to start the https server
> < Include /etc/httpd/conf/extra/httpd-ssl.conf
> <
> 735c518
> < # Enable the directive below to deal with user agents that deliberately
> ---
>> # uncomment out the below to deal with user agents that deliberately
>
> and pre your request here is the actual httpd.conf:
>
> # cat httpd.conf
> #
> # This is the main Apache HTTP server configuration file. It contains the
> # configuration directives that give the server its instructions.
> # See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
> # In particular, see
> # <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
> # for a discussion of each configuration directive.
> #
> # Do NOT simply read the instructions in here without understanding
> # what they do. They're here only as hints or reminders. If you are unsure
> # consult the online docs. You have been warned.
>
> # CentOS-6 note
> # Many of the directives formerly contained in this file are now
> # broken out into individual confiuration files in /etc/httpd/conf/extra.
> # The Include statements for these files are found at the end of this one.
>
> #
> # Don't give away too much information about all the subcomponents
> # we are running. Comment out this line if you don't mind remote sites
> # finding out what major optional modules you are running
> ServerTokens OS
>
> #
> # Configuration and logfile names: If the filenames you specify for many
> # of the server's control files begin with "/" (or "drive:/" for Win32), the
> # server will use that explicit path. If the filenames do *not* begin
> # with "/", the value of ServerRoot is prepended -- so "logs/access_log"
> # with ServerRoot set to "/usr/local/apache2" will be interpreted by the
> # server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
> # will be interpreted as '/logs/access_log'.
>
> #
> # ServerRoot: The top of the directory tree under which the server's
> # configuration, error, and log files are kept.
> #
> # Do not add a slash at the end of the directory path. If you point
> # ServerRoot at a non-local disk, be sure to specify a local disk on the
> # Mutex directive, if file-based mutexes are used. If you wish to share the
> # same ServerRoot for multiple httpd daemons, you will need to change at
> # least PidFile.
> #
> ServerRoot "/etc/httpd"
>
> #
> # PidFile: The file in which the server should record its process
> # identification number when it starts. Note the PIDFILE variable in
> # /etc/sysconfig/httpd must be set appropriately if this location is
> # changed.
> #
> PidFile run/httpd.pid
>
> #
> # Mutex: Allows you to set the mutex mechanism and mutex file directory
> # for individual mutexes, or change the global defaults
> #
> # Uncomment and change the directory if mutexes are file-based and the default
> # mutex file directory is not on a local disk or is not appropriate for some
> # other reason.
> #
> # Mutex default:/var/run
>
> #
> # Timeout: The number of seconds before receives and sends time out.
> #
> Timeout 60
>
> #
> # KeepAlive: Whether or not to allow persistent connections (more than
> # one request per connection). Set to "Off" to deactivate.
> #
> KeepAlive Off
>
> #
> # MaxKeepAliveRequests: The maximum number of requests to allow
> # during a persistent connection. Set to 0 to allow an unlimited amount.
> # We recommend you leave this number high, for maximum performance.
> #
> MaxKeepAliveRequests 100
>
> #
> # KeepAliveTimeout: Number of seconds to wait for the next request from the
> # same client on the same connection.
> #
> KeepAliveTimeout 15
>
> ##
> ## Server-Pool Size Regulation (MPM specific)
> ##
>
> # prefork MPM
> # StartServers: number of server processes to start
> # MinSpareServers: minimum number of server processes which are kept spare
> # MaxSpareServers: maximum number of server processes which are kept spare
> # ServerLimit: maximum value for MaxClients for the lifetime of the server
> # MaxClients: maximum number of server processes allowed to start
> # MaxRequestsPerChild: maximum number of requests a server process serves
> <IfModule prefork.c>
> StartServers 8
> MinSpareServers 5
> MaxSpareServers 20
> ServerLimit 256
> MaxClients 256
> MaxRequestsPerChild 4000
> </IfModule>
>
> # worker MPM
> # StartServers: initial number of server processes to start
> # MaxClients: maximum number of simultaneous client connections
> # MinSpareThreads: minimum number of worker threads which are kept spare
> # MaxSpareThreads: maximum number of worker threads which are kept spare
> # ThreadsPerChild: constant number of worker threads in each server process
> # MaxRequestsPerChild: maximum number of requests a server process serves
> <IfModule worker.c>
> StartServers 4
> MaxClients 300
> MinSpareThreads 25
> MaxSpareThreads 75
> ThreadsPerChild 25
> MaxRequestsPerChild 0
> </IfModule>
>
> #
> # Listen: Allows you to bind Apache to specific IP addresses and/or
> # ports, instead of the default. See also the <VirtualHost>
> # directive.
> #
> # Change this to Listen on specific IP addresses as shown below to
> # prevent Apache from glomming onto all bound IP addresses.
> #
> #Listen 12.34.56.78:80
> Listen 80
>
> #
> # Dynamic Shared Object (DSO) Support
> #
> # To be able to use the functionality of a module which was built as a DSO you
> # have to place corresponding `LoadModule' lines at this location so the
> # directives contained in it are actually available _before_ they are used.
> # Statically compiled modules (those listed by `httpd -l') do not need
> # to be loaded here.
> #
> # Example:
> # LoadModule foo_module modules/mod_foo.so
> #
> LoadModule access_compat_module modules/mod_access_compat.so
> #LoadModule actions_module modules/mod_actions.so
> LoadModule alias_module modules/mod_alias.so
> #LoadModule allowmethods_module modules/mod_allowmethods.so
> #LoadModule asis_module modules/mod_asis.so
> LoadModule auth_basic_module modules/mod_auth_basic.so
> LoadModule auth_digest_module modules/mod_auth_digest.so
> #LoadModule auth_form_module modules/mod_auth_form.so
> #LoadModule authn_anon_module modules/mod_authn_anon.so
> LoadModule authn_core_module modules/mod_authn_core.so
> #LoadModule authn_dbd_module modules/mod_authn_dbd.so
> #LoadModule authn_dbm_module modules/mod_authn_dbm.so
> LoadModule authn_file_module modules/mod_authn_file.so
> #LoadModule authn_socache_module modules/mod_authn_socache.so
> #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
> LoadModule authz_core_module modules/mod_authz_core.so
> #LoadModule authz_dbd_module modules/mod_authz_dbd.so
> #LoadModule authz_dbm_module modules/mod_authz_dbm.so
> LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
> LoadModule authz_host_module modules/mod_authz_host.so
> #LoadModule authz_owner_module modules/mod_authz_owner.so
> LoadModule authz_user_module modules/mod_authz_user.so
> LoadModule autoindex_module modules/mod_autoindex.so
> #LoadModule bucketeer_module modules/mod_bucketeer.so
> #LoadModule buffer_module modules/mod_buffer.so
> #LoadModule cache_disk_module modules/mod_cache_disk.so
> #LoadModule cache_module modules/mod_cache.so
> #LoadModule cache_socache_module modules/mod_cache_socache.so
> #LoadModule case_filter_in_module modules/mod_case_filter_in.so
> #LoadModule case_filter_module modules/mod_case_filter.so
> #LoadModule cgid_module modules/mod_cgid.so
> #LoadModule charset_lite_module modules/mod_charset_lite.so
> #LoadModule data_module modules/mod_data.so
> #LoadModule dav_lock_module modules/mod_dav_lock.so
> LoadModule dav_module modules/mod_dav.so
> # This one has to follow dav_module
> LoadModule dav_fs_module modules/mod_dav_fs.so
> #LoadModule dbd_module modules/mod_dbd.so
> #LoadModule deflate_module modules/mod_deflate.so
> #LoadModule dialup_module modules/mod_dialup.so
> LoadModule dir_module modules/mod_dir.so
> #LoadModule dumpio_module modules/mod_dumpio.so
> #LoadModule echo_module modules/mod_echo.so
> LoadModule env_module modules/mod_env.so
> #LoadModule expires_module modules/mod_expires.so
> #LoadModule ext_filter_module modules/mod_ext_filter.so
> #LoadModule file_cache_module modules/mod_file_cache.so
> LoadModule filter_module modules/mod_filter.so
> LoadModule headers_module modules/mod_headers.so
> #LoadModule heartbeat_module modules/mod_heartbeat.so
> #LoadModule heartmonitor_module modules/mod_heartmonitor.so
> #LoadModule include_module modules/mod_include.so
> #LoadModule info_module modules/mod_info.so
> #LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
> #LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
> #LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
> #LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
> #LoadModule ldap_module modules/mod_ldap.so
> LoadModule log_config_module modules/mod_log_config.so
> #LoadModule log_debug_module modules/mod_log_debug.so
> #LoadModule log_forensic_module modules/mod_log_forensic.so
> #LoadModule logio_module modules/mod_logio.so
> #LoadModule lua_module modules/mod_lua.so
> #LoadModule macro_module modules/mod_macro.so
> LoadModule mime_magic_module modules/mod_mime_magic.so
> LoadModule mime_module modules/mod_mime.so
> LoadModule mpm_event_module modules/mod_mpm_event.so
> #LoadModule negotiation_module modules/mod_negotiation.so
> #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
> #LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
> #LoadModule proxy_connect_module modules/mod_proxy_connect.so
> #LoadModule proxy_express_module modules/mod_proxy_express.so
> #LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
> #LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
> #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
> #LoadModule proxy_html_module modules/mod_proxy_html.so
> #LoadModule proxy_http_module modules/mod_proxy_http.so
> #LoadModule proxy_module modules/mod_proxy.so
> #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
> #LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
> #LoadModule ratelimit_module modules/mod_ratelimit.so
> #LoadModule reflector_module modules/mod_reflector.so
> #LoadModule remoteip_module modules/mod_remoteip.so
> LoadModule reqtimeout_module modules/mod_reqtimeout.so
> #LoadModule request_module modules/mod_request.so
> LoadModule rewrite_module modules/mod_rewrite.so
> #LoadModule sed_module modules/mod_sed.so
> #LoadModule session_cookie_module modules/mod_session_cookie.so
> #LoadModule session_crypto_module modules/mod_session_crypto.so
> #LoadModule session_dbd_module modules/mod_session_dbd.so
> #LoadModule session_module modules/mod_session.so
> LoadModule setenvif_module modules/mod_setenvif.so
> #LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
> #LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
> #LoadModule socache_dbm_module modules/mod_socache_dbm.so
> #LoadModule socache_memcache_module modules/mod_socache_memcache.so
> #LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
> #LoadModule speling_module modules/mod_speling.so
> LoadModule ssl_module modules/mod_ssl.so
> LoadModule status_module modules/mod_status.so
> #LoadModule substitute_module modules/mod_substitute.so
> #LoadModule suexec_module modules/mod_suexec.so
> #LoadModule unique_id_module modules/mod_unique_id.so
> LoadModule unixd_module modules/mod_unixd.so
> #LoadModule userdir_module modules/mod_userdir.so
> #LoadModule usertrack_module modules/mod_usertrack.so
> LoadModule version_module modules/mod_version.so
> #LoadModule vhost_alias_module modules/mod_vhost_alias.so
> #LoadModule watchdog_module modules/mod_watchdog.so
> #LoadModule xml2enc_module modules/mod_xml2enc.so
>
> <IfModule unixd_module>
> #
> # If you wish httpd to run as a different user or group, you must run
> # httpd as root initially and it will switch.
> #
> # User/Group: The name (or #number) of the user/group to run httpd as.
> # It is usually good practice to create a dedicated user and group for
> # running httpd, as with most system services.
> #
> #User daemon
> #Group daemon
> User apache
> Group apache
>
> </IfModule>
>
> #
> # Load optional config files from the config directory "/etc/httpd/conf.d".
> #
> IncludeOptional conf.d/*.conf
> # If conf.d/*.conf files are required (not optional) for your installation
> # then use:
> Include conf.d/*.conf
>
> #
> # ExtendedStatus controls whether Apache will generate "full" status
> # information (ExtendedStatus On) or just basic information (ExtendedStatus
> # Off) when the "server-status" handler is called. The default is Off.
> #
> #ExtendedStatus On
> #ExtendedStatus Off
>
> # 'Main' server configuration
> #
> # The directives in this section set up the values used by the 'main'
> # server, which responds to any requests that aren't handled by a
> # <VirtualHost> definition. These values also provide defaults for
> # any <VirtualHost> containers you may define later in the file.
> #
> # All of these directives may appear inside <VirtualHost> containers,
> # in which case these default settings will be overridden for the
> # virtual host being defined.
> #
>
> #
> # ServerAdmin: Your address, where problems with the server should be
> # e-mailed. This address appears on some server-generated pages, such
> # as error documents. e.g. admin@xxxxxxxxxxxxxxx
> #
> ServerAdmin you@xxxxxxxxxxx
>
> #
> # ServerName gives the name and port that the server uses to identify itself.
> # This can often be determined automatically, but we recommend you specify
> # it explicitly to prevent problems during startup.
> #
> # If your host doesn't have a registered DNS name, enter its IP address here.
> #
> #ServerName www.example.com:80
>
> #
> # Deny access to the entirety of your server's filesystem. You must
> # explicitly permit access to web content directories in other
> # <Directory> blocks below.
> #
> <Directory />
> # AllowOverride none
> # Require all denied
> </Directory>
>
> #<Directory />
> # Options None
> # AllowOverride None
> # Require all denied
> # Order deny,allow
> # deny from all
> # <LimitExcept GET POST>
> # deny from all
> # </limitexcept>
> #</Directory>
>
> #
> # Note that from this point forward you must specifically allow
> # particular features to be enabled - so if something's not working as
> # you might expect, make sure that you have specifically enabled it
> # below.
> #
>
> #
> # UseCanonicalName: Determines how Apache constructs self-referencing
> # URLs and the SERVER_NAME and SERVER_PORT variables.
> # When set "Off", Apache will use the Hostname and Port supplied
> # by the client. When set "On", Apache will use the value of the
> # ServerName directive.
> #
> UseCanonicalName Off
>
> #
> # DocumentRoot: The directory out of which you will serve your
> # documents. By default, all requests are taken from this directory, but
> # symbolic links and aliases may be used to point to other locations.
> #
> DocumentRoot "/var/www/html"
>
> #
> # Each directory to which Apache has access can be configured with respect
> # to which services and features are allowed and/or disabled in that
> # directory (and its subdirectories).
> #
> <Directory "/var/www/error">
> Options Indexes
> AllowOverride None
> Require all granted
> </Directory>
>
> <Directory "/var/www/html">
> #
> # Possible values for the Options directive are "None", "All",
> # or any combination of:
> # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
> #
> # Note that "MultiViews" must be named *explicitly* --- "Options All"
> # doesn't give it to you.
> #
> # The Options directive is both complicated and important. Please see
> # http://httpd.apache.org/docs/2.4/mod/core.html#options
> # for more information.
> #
> Options Indexes FollowSymLinks
>
> #
> # AllowOverride controls what directives may be placed in .htaccess files.
> # It can be "All", "None", or any combination of the keywords:
> # AllowOverride FileInfo AuthConfig Limit
> #
> AllowOverride None
>
> #
> # Controls who can get stuff from this server.
> #
> Require all granted
> </Directory>
>
> #
> # UserDir: The name of the directory that is appended onto a user's home
> # directory if a ~user request is received.
> #
> # The path to the end user account 'public_html' directory must be
> # accessible to the webserver userid. This usually means that ~userid
> # must have permissions of 711, ~userid/public_html must have permissions
> # of 755, and documents contained therein must be world-readable.
> # Otherwise, the client will only receive a "403 Forbidden" message.
> #
> # See also: http://httpd.apache.org/docs/misc/FAQ.html#forbidden
> #
> <IfModule mod_userdir.c>
> #
> # UserDir is disabled by default since it can confirm the presence
> # of a username on the system (depending on home directory
> # permissions).
> #
> UserDir disabled
>
> #
> # To enable requests to /~user/ to serve the user's public_html
> # directory, remove the "UserDir disabled" line above, and uncomment
> # the following line instead:
> #
> #UserDir public_html
> </IfModule>
>
> #
> # Control access to UserDir directories. The following is an example
> # for a site where these directories are restricted to read-only.
> #
> #<Directory /home/*/public_html>
> # AllowOverride FileInfo AuthConfig Limit
> # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
> # <Limit GET POST OPTIONS>
> # Order allow,deny
> # Allow from all
> # </Limit>
> # <LimitExcept GET POST OPTIONS>
> # Order deny,allow
> # Deny from all
> # </LimitExcept>
> #</Directory>
>
> #
> # DirectoryIndex: sets the file that Apache will serve if a directory
> # is requested.
> #
> # The index.html.var file (a type-map) is used to deliver content-
> # negotiated documents. The MultiViews Option can be used for the
> # same purpose, but it is much slower.
> #
>
> <IfModule dir_module>
> #
> # DirectoryIndex index.html
> DirectoryIndex index.html index.html.var
>
> </IfModule>
>
> #
> # AccessFileName: The name of the file to look for in each directory
> # for additional configuration directives. See also the AllowOverride
> # directive.
> #
> AccessFileName .htaccess
>
> #
> # The following lines prevent .htaccess and .htpasswd files from being
> # viewed by Web clients. Note that the condition string is NOT a regexp
> # but a simple glob ? match one character, * matches zero or more,
> # all other characters, including '.', match themselves. For example:
> # <Files "?at.*">
> # This would apply to cat.html, bat.html, hat.php and so on.
> # </Files>
> #
> <Files ".ht*">
> Require all denied
> </Files>
>
> #
> # ErrorLog: The location of the error log file.
> # If you do not specify an ErrorLog directive within a <VirtualHost>
> # container, error messages relating to that virtual host will be
> # logged here. If you *do* define an error logfile for a <VirtualHost>
> # container, that host's errors will be logged there and not here.
> #
> ErrorLog "/var/log/httpd/Apache_default_error_log"
>
> #
> # LogLevel: Control the number of messages logged to the error_log.
> # Possible values include: debug, info, notice, warn, error, crit,
> # alert, emerg.
> #
> LogLevel warn
>
> <IfModule log_config_module>
> #
> # The following directives define some format nicknames for use with
> # a CustomLog directive (see below).
> #
> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\""
> combined
> LogFormat "%h %l %u %t \"%r\" %>s %b" common
>
> <IfModule logio_module>
> # You need to enable mod_logio.c to use %I and %O
> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"
> %I %O" combinedio
> </IfModule>
>
> #
> # The location and format of the access logfile (Common Logfile Format).
> # If you do not define any access logfiles within a <VirtualHost>
> # container, they will be logged here. Contrariwise, if you *do*
> # define per-<VirtualHost> access logfiles, transactions will be
> # logged therein and *not* in this file.
> #
> CustomLog "/var/log/httpd/Apache_default_access_log" common
>
> #
> # If you prefer a logfile with access, agent, and referer information
> # (Combined Logfile Format) you can use the following directive.
> #
> #CustomLog "/var/log/httpd/access_log" combined
> </IfModule>
>
> <IfModule alias_module>
> #
> # Redirect: Allows you to tell clients about documents that used to
> # exist in your server's namespace, but do not anymore. The client
> # will make a new request for the document at its new location.
> # Example:
> # Redirect permanent /foo http://www.example.com/bar
>
> #
> # Alias: Maps web paths into filesystem paths and is used to
> # access content that does not live under the DocumentRoot.
> # Example:
> # Alias /webpath /full/filesystem/path
> #
> # If you include a trailing / on /webpath then the server will
> # require it to be present in the URL. You will also likely
> # need to provide a <Directory> section to allow access to
> # the filesystem path.
> Alias /error "/var/www/error"
>
> #
> # ScriptAlias: This controls which directories contain server scripts.
> # ScriptAliases are essentially the same as Aliases, except that
> # documents in the target directory are treated as applications and
> # run by the server when requested rather than as documents sent to the
> # client. The same rules about trailing "/" apply to ScriptAlias
> # directives as to Alias.
> #
> ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"
> </IfModule>
>
> <IfModule cgid_module>
> #
> # ScriptSock: On threaded servers, designate the path to the UNIX
> # socket used to communicate with the CGI daemon of mod_cgid.
> #
> #Scriptsock cgisock
> </IfModule>
>
> #
> # "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
> # CGI directory exists, if you have that configured.
> #
> <Directory "/var/www/cgi-bin">
> AllowOverride None
> Options None
> Require all granted
> </Directory>
>
> <IfModule mime_module>
> #
> # TypesConfig points to the file containing the list of mappings from
> # filename extension to MIME-type.
> #
> TypesConfig /etc/httpd/conf/mime.types
> # Note that RedHatEL6 provides and uses a different mime.types file in /etc
>
> #
> # AddType allows you to add to or override the MIME configuration
> # file specified in TypesConfig for specific file types.
> #
> #AddType application/x-gzip .tgz
> #
> # AddEncoding allows you to have certain browsers uncompress
> # information on the fly. Note: Not all browsers support this.
> #
> #AddEncoding x-compress .Z
> #AddEncoding x-gzip .gz .tgz
> #
> # If the AddEncoding directives above are commented-out, then you
> # probably should define those extensions to indicate media types:
> #
> AddType application/x-compress .Z
> AddType application/x-gzip .gz .tgz
>
> #
> # AddHandler allows you to map certain file extensions to "handlers":
> # actions unrelated to filetype. These can be either built into the server
> # or added with the Action directive (see below)
> #
> # To use CGI scripts outside of ScriptAliased directories:
> # (You will also need to add "ExecCGI" to the "Options" directive.)
> #
> #AddHandler cgi-script .cgi
>
> # For type maps (negotiated resources):
> #AddHandler type-map var
>
> #
> # Filters allow you to process content before it is sent to the client.
> #
> # To parse .shtml files for server-side includes (SSI):
> # (You will also need to add "Includes" to the "Options" directive.)
> #
> #AddType text/html .shtml
> #AddOutputFilter INCLUDES .shtml
> </IfModule>
>
> #
> # The mod_mime_magic module allows the server to use various hints from the
> # contents of the file itself to determine its type. The MIMEMagicFile
> # directive tells the module where the hint definitions are located.
> <IfModule mod_mime_magic.c>
> #MIMEMagicFile /etc/httpd/conf/magic
> MIMEMagicFile conf/magic
> </IfModule>
>
> #
> # HostnameLookups: Log the names of clients or just their IP addresses
> # e.g., www.apache.org (on) or 204.62.129.132 (off).
> # The default is off because it'd be overall better for the net if people
> # had to knowingly turn this feature on, since enabling it means that
> # each client request will result in AT LEAST one lookup request to the
> # nameserver. Allowed values On | Off | Double
> #
> HostnameLookups Off
>
> # Also See Below: # Multi-language error messages
> #
> # Customizable error responses come in three flavors:
> # 1) plain text 2) local redirects 3) external redirects
> #
> # Some examples:
> #ErrorDocument 500 "The server made a boo boo."
> #ErrorDocument 404 /missing.html
> #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
> #ErrorDocument 402 http://www.example.com/subscription_info.html
> #
>
> #
> # MaxRanges: Maximum number of Ranges in a request before
> # returning the entire resource, or one of the special
> # values 'default', 'none' or 'unlimited'.
> # Default setting is to accept 200 Ranges.
> #MaxRanges unlimited
>
> #
> # EnableMMAP and EnableSendfile: On systems that support it,
> # memory-mapping or the sendfile syscall may be used to deliver
> # files. This usually improves server performance, but must
> # be turned off when serving from networked-mounted
> # filesystems or if support for these functions is otherwise
> # broken on your system.
> # Defaults: EnableMMAP On, EnableSendfile Off
> #
> #EnableMMAP Off
> #EnableSendfile On
>
> # Supplemental configuration
> #
> # The configuration files in the /etc/httpd/conf/extra/ directory can be
> # included to add extra features or to modify the default configuration of
> # the server, or you may simply copy their contents here and change as
> # necessary.
>
> # Server-pool management (MPM specific)
> #Include /etc/httpd/conf/extra/httpd-mpm.conf
>
> # Multi-language error messages
> #Include /etc/httpd/conf/extra/httpd-multilang-errordoc.conf
>
> # Fancy directory listings
> Include /etc/httpd/conf/extra/httpd-autoindex.conf
>
> # Language settings
> #Include /etc/httpd/conf/extra/httpd-languages.conf
>
> # User home directories
> #Include /etc/httpd/conf/extra/httpd-userdir.conf
>
> # Real-time info on requests and configuration
> #Include /etc/httpd/conf/extra/httpd-info.conf
>
> # Virtual hosts
> #Include /etc/httpd/conf/extra/httpd-vhosts.conf
> Include /etc/httpd/virtual.d/*.conf
>
> # Local access to the Apache HTTP Server Manual
> #Include /etc/httpd/conf/extra/httpd-manual.conf
>
> # Distributed authoring and versioning (WebDAV)
> #Include /etc/httpd/conf/extra/httpd-dav.conf
>
> # Various default settings
> #Include /etc/httpd/conf/extra/httpd-default.conf
>
> # Configure mod_proxy_html to understand HTML4/XHTML1
> <IfModule proxy_html_module>
> Include /etc/httpd/conf/extra/proxy-html.conf
> </IfModule>
>
> # Secure (SSL/TLS) connections
> #
> # Note: The following must must be present to support
> # starting without SSL on platforms with no /dev/random equivalent
> # but a statically compiled-in mod_ssl.
> #
> <IfModule ssl_module>
> SSLRandomSeed startup builtin
> SSLRandomSeed connect builtin
> <IfModule !mod_socache_shmcb>
> LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
> </IfModule>
> </IfModule>
>
> # Uncomment this to start the https server
> Include /etc/httpd/conf/extra/httpd-ssl.conf
>
> #
> # Enable the directive below to deal with user agents that deliberately
> # violate open standards by misusing DNT (DNT *must* be a specific
> # end-user choice)
> #
> #<IfModule setenvif_module>
> #BrowserMatch "MSIE 10.0;" bad_DNT
> #</IfModule>
> #<IfModule headers_module>
> #RequestHeader unset DNT env=bad_DNT
> #</IfModule>
>
>
>
> Thanks for the assistance.
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: users-help@xxxxxxxxxxxxxxxx
|