Re: [PATCH -next] drm/amd/display: clean up some inconsistent indentings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Applied.  Thanks!

On Wed, Sep 27, 2023 at 9:14 PM Yang Li <yang.lee@xxxxxxxxxxxxxxxxx> wrote:
>
> drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn35/dcn35_fpu.c:261 dcn35_update_bw_bounding_box_fpu() warn: inconsistent indenting
>
> Signed-off-by: Yang Li <yang.lee@xxxxxxxxxxxxxxxxx>
> ---
>  .../drm/amd/display/dc/dml/dcn35/dcn35_fpu.c  | 144 +++++++++---------
>  1 file changed, 72 insertions(+), 72 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c
> index 4d5ee2aad9e4..4f284c31de5d 100644
> --- a/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c
> +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c
> @@ -258,85 +258,85 @@ void dcn35_update_bw_bounding_box_fpu(struct dc *dc,
>
>         dc_assert_fp_enabled();
>
> -               dcn3_5_ip.max_num_otg =
> -                       dc->res_pool->res_cap->num_timing_generator;
> -               dcn3_5_ip.max_num_dpp = dc->res_pool->pipe_count;
> -               dcn3_5_soc.num_chans = bw_params->num_channels;
> -
> -               ASSERT(clk_table->num_entries);
> -
> -               /* Prepass to find max clocks independent of voltage level. */
> -               for (i = 0; i < clk_table->num_entries; ++i) {
> -                       if (clk_table->entries[i].dispclk_mhz > max_dispclk_mhz)
> -                               max_dispclk_mhz = clk_table->entries[i].dispclk_mhz;
> -                       if (clk_table->entries[i].dppclk_mhz > max_dppclk_mhz)
> -                               max_dppclk_mhz = clk_table->entries[i].dppclk_mhz;
> -               }
> +       dcn3_5_ip.max_num_otg =
> +               dc->res_pool->res_cap->num_timing_generator;
> +       dcn3_5_ip.max_num_dpp = dc->res_pool->pipe_count;
> +       dcn3_5_soc.num_chans = bw_params->num_channels;
> +
> +       ASSERT(clk_table->num_entries);
> +
> +       /* Prepass to find max clocks independent of voltage level. */
> +       for (i = 0; i < clk_table->num_entries; ++i) {
> +               if (clk_table->entries[i].dispclk_mhz > max_dispclk_mhz)
> +                       max_dispclk_mhz = clk_table->entries[i].dispclk_mhz;
> +               if (clk_table->entries[i].dppclk_mhz > max_dppclk_mhz)
> +                       max_dppclk_mhz = clk_table->entries[i].dppclk_mhz;
> +       }
>
> -               for (i = 0; i < clk_table->num_entries; i++) {
> -                       /* loop backwards*/
> -                       for (closest_clk_lvl = 0, j = dcn3_5_soc.num_states - 1;
> -                            j >= 0; j--) {
> -                               if (dcn3_5_soc.clock_limits[j].dcfclk_mhz <=
> -                                   clk_table->entries[i].dcfclk_mhz) {
> -                                       closest_clk_lvl = j;
> -                                       break;
> -                               }
> -                       }
> -                       if (clk_table->num_entries == 1) {
> -                               /*smu gives one DPM level, let's take the highest one*/
> -                               closest_clk_lvl = dcn3_5_soc.num_states - 1;
> +       for (i = 0; i < clk_table->num_entries; i++) {
> +               /* loop backwards*/
> +               for (closest_clk_lvl = 0, j = dcn3_5_soc.num_states - 1;
> +                       j >= 0; j--) {
> +                       if (dcn3_5_soc.clock_limits[j].dcfclk_mhz <=
> +                               clk_table->entries[i].dcfclk_mhz) {
> +                               closest_clk_lvl = j;
> +                               break;
>                         }
> +               }
> +               if (clk_table->num_entries == 1) {
> +                       /*smu gives one DPM level, let's take the highest one*/
> +                       closest_clk_lvl = dcn3_5_soc.num_states - 1;
> +               }
>
> -                       clock_limits[i].state = i;
> -
> -                       /* Clocks dependent on voltage level. */
> -                       clock_limits[i].dcfclk_mhz = clk_table->entries[i].dcfclk_mhz;
> -                       if (clk_table->num_entries == 1 &&
> -                           clock_limits[i].dcfclk_mhz <
> -                           dcn3_5_soc.clock_limits[closest_clk_lvl].dcfclk_mhz) {
> -                               /*SMU fix not released yet*/
> -                               clock_limits[i].dcfclk_mhz =
> -                                       dcn3_5_soc.clock_limits[closest_clk_lvl].dcfclk_mhz;
> -                       }
> +               clock_limits[i].state = i;
>
> -                       clock_limits[i].fabricclk_mhz =
> -                               clk_table->entries[i].fclk_mhz;
> -                       clock_limits[i].socclk_mhz =
> -                               clk_table->entries[i].socclk_mhz;
> -
> -                       if (clk_table->entries[i].memclk_mhz &&
> -                           clk_table->entries[i].wck_ratio)
> -                               clock_limits[i].dram_speed_mts =
> -                                       clk_table->entries[i].memclk_mhz * 2 *
> -                                       clk_table->entries[i].wck_ratio;
> -
> -                       /* Clocks independent of voltage level. */
> -                       clock_limits[i].dispclk_mhz = max_dispclk_mhz ?
> -                               max_dispclk_mhz :
> -                               dcn3_5_soc.clock_limits[closest_clk_lvl].dispclk_mhz;
> -
> -                       clock_limits[i].dppclk_mhz = max_dppclk_mhz ?
> -                               max_dppclk_mhz :
> -                               dcn3_5_soc.clock_limits[closest_clk_lvl].dppclk_mhz;
> -
> -                       clock_limits[i].dram_bw_per_chan_gbps =
> -                               dcn3_5_soc.clock_limits[closest_clk_lvl].dram_bw_per_chan_gbps;
> -                       clock_limits[i].dscclk_mhz =
> -                               dcn3_5_soc.clock_limits[closest_clk_lvl].dscclk_mhz;
> -                       clock_limits[i].dtbclk_mhz =
> -                               dcn3_5_soc.clock_limits[closest_clk_lvl].dtbclk_mhz;
> -                       clock_limits[i].phyclk_d18_mhz =
> -                               dcn3_5_soc.clock_limits[closest_clk_lvl].phyclk_d18_mhz;
> -                       clock_limits[i].phyclk_mhz =
> -                               dcn3_5_soc.clock_limits[closest_clk_lvl].phyclk_mhz;
> +               /* Clocks dependent on voltage level. */
> +               clock_limits[i].dcfclk_mhz = clk_table->entries[i].dcfclk_mhz;
> +               if (clk_table->num_entries == 1 &&
> +                       clock_limits[i].dcfclk_mhz <
> +                       dcn3_5_soc.clock_limits[closest_clk_lvl].dcfclk_mhz) {
> +                       /*SMU fix not released yet*/
> +                       clock_limits[i].dcfclk_mhz =
> +                               dcn3_5_soc.clock_limits[closest_clk_lvl].dcfclk_mhz;
>                 }
>
> -               memcpy(dcn3_5_soc.clock_limits, clock_limits,
> -                      sizeof(dcn3_5_soc.clock_limits));
> +               clock_limits[i].fabricclk_mhz =
> +                       clk_table->entries[i].fclk_mhz;
> +               clock_limits[i].socclk_mhz =
> +                       clk_table->entries[i].socclk_mhz;
> +
> +               if (clk_table->entries[i].memclk_mhz &&
> +                       clk_table->entries[i].wck_ratio)
> +                       clock_limits[i].dram_speed_mts =
> +                               clk_table->entries[i].memclk_mhz * 2 *
> +                               clk_table->entries[i].wck_ratio;
> +
> +               /* Clocks independent of voltage level. */
> +               clock_limits[i].dispclk_mhz = max_dispclk_mhz ?
> +                       max_dispclk_mhz :
> +                       dcn3_5_soc.clock_limits[closest_clk_lvl].dispclk_mhz;
> +
> +               clock_limits[i].dppclk_mhz = max_dppclk_mhz ?
> +                       max_dppclk_mhz :
> +                       dcn3_5_soc.clock_limits[closest_clk_lvl].dppclk_mhz;
> +
> +               clock_limits[i].dram_bw_per_chan_gbps =
> +                       dcn3_5_soc.clock_limits[closest_clk_lvl].dram_bw_per_chan_gbps;
> +               clock_limits[i].dscclk_mhz =
> +                       dcn3_5_soc.clock_limits[closest_clk_lvl].dscclk_mhz;
> +               clock_limits[i].dtbclk_mhz =
> +                       dcn3_5_soc.clock_limits[closest_clk_lvl].dtbclk_mhz;
> +               clock_limits[i].phyclk_d18_mhz =
> +                       dcn3_5_soc.clock_limits[closest_clk_lvl].phyclk_d18_mhz;
> +               clock_limits[i].phyclk_mhz =
> +                       dcn3_5_soc.clock_limits[closest_clk_lvl].phyclk_mhz;
> +       }
> +
> +       memcpy(dcn3_5_soc.clock_limits, clock_limits,
> +               sizeof(dcn3_5_soc.clock_limits));
>
> -               if (clk_table->num_entries)
> -                       dcn3_5_soc.num_states = clk_table->num_entries;
> +       if (clk_table->num_entries)
> +               dcn3_5_soc.num_states = clk_table->num_entries;
>
>         if (max_dispclk_mhz) {
>                 dcn3_5_soc.dispclk_dppclk_vco_speed_mhz = max_dispclk_mhz * 2;
> --
> 2.20.1.7.g153144c
>




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux