[PATCH 8/8] drm/amd: Move microcode init from sw_init to early_init for CIK SDMA

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



As part of IP discovery early_init is run for all HW IP blocks.
During this phase all firmware is supposed to be identified that may
be missing so that the driver can avoid releasing resources used by
the EFI framebuffer or simpledrm until the last possible moment.

Move microcode loading from sw_init to early_init.

Signed-off-by: Mario Limonciello <mario.limonciello@xxxxxxx>
---
 drivers/gpu/drm/amd/amdgpu/cik_sdma.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/cik_sdma.c b/drivers/gpu/drm/amd/amdgpu/cik_sdma.c
index 4193289ae82f..ee5dce6f6043 100644
--- a/drivers/gpu/drm/amd/amdgpu/cik_sdma.c
+++ b/drivers/gpu/drm/amd/amdgpu/cik_sdma.c
@@ -925,9 +925,14 @@ static void cik_enable_sdma_mgls(struct amdgpu_device *adev,
 static int cik_sdma_early_init(void *handle)
 {
 	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
+	int r;
 
 	adev->sdma.num_instances = SDMA_MAX_INSTANCE;
 
+	r = cik_sdma_init_microcode(adev);
+	if (r)
+		return r;
+
 	cik_sdma_set_ring_funcs(adev);
 	cik_sdma_set_irq_funcs(adev);
 	cik_sdma_set_buffer_funcs(adev);
@@ -942,10 +947,6 @@ static int cik_sdma_sw_init(void *handle)
 	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
 	int r, i;
 
-	r = cik_sdma_init_microcode(adev);
-	if (r)
-		return r;
-
 	/* SDMA trap event */
 	r = amdgpu_irq_add_id(adev, AMDGPU_IRQ_CLIENTID_LEGACY, 224,
 			      &adev->sdma.trap_irq);
-- 
2.34.1




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux