From: Stylon Wang <stylon.wang@xxxxxxx>
[Why]
DPIA traces from DMUB is not enabled by default, which is
less convenient to debug DPIA related issues because we have
to resort to other means to enable DPIA trace.
[How]
Reuse existing DC debug mask to enable DPIA trace log from
kernel command line. This makes debugging DPIA issues easier
especially when system power state (suspend/reboot) is involved.
To turn on DPIA trace, simply add "amdgpu.dcdebugmask=0x80" to
kernel command line.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@xxxxxxx>
Acked-by: Tom Chung <chiahsuan.chung@xxxxxxx>
Signed-off-by: Stylon Wang <stylon.wang@xxxxxxx>
---
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 32fb551862b0..d21241af1aa5 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -1822,9 +1822,14 @@ static int amdgpu_dm_init(struct amdgpu_device *adev)
* It is expected that DMUB will resend any pending notifications at this point, for
* example HPD from DPIA.
*/
- if (dc_is_dmub_outbox_supported(adev->dm.dc))
+ if (dc_is_dmub_outbox_supported(adev->dm.dc)) {
dc_enable_dmub_outbox(adev->dm.dc);
+ /* DPIA trace goes to dmesg logs only if outbox is enabled */
+ if (amdgpu_dc_debug_mask & DC_ENABLE_DPIA_TRACE)
+ dc_dmub_srv_enable_dpia_trace(adev->dm.dc);
+ }
+
if (amdgpu_dm_initialize_drm_device(adev)) {
DRM_ERROR(
"amdgpu: failed to initialize sw for display support.\n");
--
2.25.1
