Fix the following errors reported by checkpatch:
ERROR: need consistent spacing around '/' (ctx:WxV)
ERROR: code indent should use tabs where possible
Signed-off-by: Ran Sun <sunran001@xxxxxxxxxx>
---
drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega12_hwmgr.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega12_hwmgr.c b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega12_hwmgr.c
index 1937be1cf5b4..4bd573d815ff 100644
--- a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega12_hwmgr.c
+++ b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega12_hwmgr.c
@@ -1623,13 +1623,13 @@ static int vega12_notify_smc_display_config_after_ps_adjustment(
if (data->smu_features[GNLD_DPM_DCEFCLK].supported) {
clock_req.clock_type = amd_pp_dcef_clock;
- clock_req.clock_freq_in_khz = min_clocks.dcefClock/10;
+ clock_req.clock_freq_in_khz = min_clocks.dcefClock / 10;
if (!vega12_display_clock_voltage_request(hwmgr, &clock_req)) {
if (data->smu_features[GNLD_DS_DCEFCLK].supported)
PP_ASSERT_WITH_CODE(
!smum_send_msg_to_smc_with_parameter(
hwmgr, PPSMC_MSG_SetMinDeepSleepDcefclk,
- min_clocks.dcefClockInSR /100,
+ min_clocks.dcefClockInSR / 100,
NULL),
"Attempt to set divider for DCEFCLK Failed!",
return -1);
@@ -2354,8 +2354,8 @@ static int vega12_apply_clocks_adjust_rules(struct pp_hwmgr *hwmgr)
uint32_t i, latency;
disable_mclk_switching = ((1 < hwmgr->display_config->num_display) &&
- !hwmgr->display_config->multi_monitor_in_sync) ||
- vblank_too_short;
+ !hwmgr->display_config->multi_monitor_in_sync) ||
+ vblank_too_short;
latency = hwmgr->display_config->dce_tolerable_mclk_in_active_latency;
/* gfxclk */
@@ -2522,7 +2522,7 @@ static int vega12_set_uclk_to_highest_dpm_level(struct pp_hwmgr *hwmgr,
dpm_table->dpm_state.hard_min_level = dpm_table->dpm_levels[dpm_table->count - 1].value;
PP_ASSERT_WITH_CODE(!(ret = smum_send_msg_to_smc_with_parameter(hwmgr,
PPSMC_MSG_SetHardMinByFreq,
- (PPCLK_UCLK << 16 ) | dpm_table->dpm_state.hard_min_level,
+ (PPCLK_UCLK << 16) | dpm_table->dpm_state.hard_min_level,
NULL)),
"[SetUclkToHightestDpmLevel] Set hard min uclk failed!",
return ret);
--
2.17.1
