Re: [PATCH] Revert "drm/amd/display: Program OTG vtotal min/max selectors unconditionally for DCN1+"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 7/2/23 12:44, Guilherme G. Piccoli wrote:
> This reverts commit 06c3a652a787efc960af7c8816036d25c4227c6c.
> 
> After this commit, the Steam Deck cannot boot with graphics anymore;
> the following message is observed on dmesg:
> 
> "[drm] ERROR [CRTC:67:crtc-0] flip_done timed out"
> 
> No other error is observed, it just stays like that. After bisecting
> amd-staging-drm-next, we narrowed it down to this commit. Seems it
> makes sense to revert it to have the tree bootable until a proper
> solution is worked.
> 
> Cc: Aurabindo Pillai <aurabindo.pillai@xxxxxxx>
> Cc: André Almeida <andrealmeid@xxxxxxxxxx>
> Cc: Melissa Wen <mwen@xxxxxxxxxx>
> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@xxxxxxx>
> Signed-off-by: Guilherme G. Piccoli <gpiccoli@xxxxxxxxxx>
> 
> ---
> 
> Hi Alex / Aurabindo, we couldn't boot the Deck with in HEAD
> (amd-staging-drm-next), git bisect led to this commit. Since its
> description already mentions a potential proper solution, related
> to the DMCUB (and some complex state tracking), I thought it was
> more effective to revert it to allow booting the tree in Deck (and
> maybe other HW - I just tested the Deck BTW).
> Lemme know your thoughts.
> 
> Special thanks to André and Melissa for helping the debug / bisect!
> We're open to test alternative patches, feel free to ping.
> Cheers,
> 
> Guilherme
> 
> 
>  drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c | 15 ++++++++++++---
>  drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c | 10 ----------
>  2 files changed, 12 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c
> index 0e8f4f36c87c..27419cd98264 100644
> --- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c
> +++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c
> @@ -945,10 +945,19 @@ void optc1_set_drr(
>  				OTG_FORCE_LOCK_ON_EVENT, 0,
>  				OTG_SET_V_TOTAL_MIN_MASK_EN, 0,
>  				OTG_SET_V_TOTAL_MIN_MASK, 0);
> -	}
>  
> -	// Setup manual flow control for EOF via TRIG_A
> -	optc->funcs->setup_manual_trigger(optc);
> +		// Setup manual flow control for EOF via TRIG_A
> +		optc->funcs->setup_manual_trigger(optc);
> +
> +	} else {
> +		REG_UPDATE_4(OTG_V_TOTAL_CONTROL,
> +				OTG_SET_V_TOTAL_MIN_MASK, 0,
> +				OTG_V_TOTAL_MIN_SEL, 0,
> +				OTG_V_TOTAL_MAX_SEL, 0,
> +				OTG_FORCE_LOCK_ON_EVENT, 0);
> +
> +		optc->funcs->set_vtotal_min_max(optc, 0, 0);
> +	}
>  }
>  
>  void optc1_set_vtotal_min_max(struct timing_generator *optc, int vtotal_min, int vtotal_max)
> diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c
> index 58bdbd859bf9..d6f095b4555d 100644
> --- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c
> +++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c
> @@ -462,16 +462,6 @@ void optc2_setup_manual_trigger(struct timing_generator *optc)
>  {
>  	struct optc *optc1 = DCN10TG_FROM_TG(optc);
>  
> -	/* Set the min/max selectors unconditionally so that
> -	 * DMCUB fw may change OTG timings when necessary
> -	 * TODO: Remove the w/a after fixing the issue in DMCUB firmware
> -	 */
> -	REG_UPDATE_4(OTG_V_TOTAL_CONTROL,
> -				 OTG_V_TOTAL_MIN_SEL, 1,
> -				 OTG_V_TOTAL_MAX_SEL, 1,
> -				 OTG_FORCE_LOCK_ON_EVENT, 0,
> -				 OTG_SET_V_TOTAL_MIN_MASK, (1 << 1)); /* TRIGA */
> -
>  	REG_SET_8(OTG_TRIGA_CNTL, 0,
>  			OTG_TRIGA_SOURCE_SELECT, 21,
>  			OTG_TRIGA_SOURCE_PIPE_SELECT, optc->inst,


Hi,

Sorry for the delayed response, this patch went unnoticed. This revert would break asics. Could you try the attached patch without reverting this one ?
From 9ac8b837900ac242fcc9e948c8de7aca51a5be7e Mon Sep 17 00:00:00 2001
From: Aurabindo Pillai <aurabindo.pillai@xxxxxxx>
Date: Tue, 11 Jul 2023 14:16:27 -0400
Subject: [PATCH 2/2] drm/amd/display: add DCN301 specific logic for OTG
 programming

[Why&How]
DCN301 does not have FAMS hence the workaround needed on other DCN3x
variants related to OTG min/max selector programming is not applicable for it.
Hence isolate it and have it use the old sequence without workaround.

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@xxxxxxx>
---
 .../gpu/drm/amd/display/dc/dcn301/Makefile    |   3 +-
 .../drm/amd/display/dc/dcn301/dcn301_optc.c   | 185 ++++++++++++++++++
 .../drm/amd/display/dc/dcn301/dcn301_optc.h   |  36 ++++
 3 files changed, 223 insertions(+), 1 deletion(-)
 create mode 100644 drivers/gpu/drm/amd/display/dc/dcn301/dcn301_optc.c
 create mode 100644 drivers/gpu/drm/amd/display/dc/dcn301/dcn301_optc.h

diff --git a/drivers/gpu/drm/amd/display/dc/dcn301/Makefile b/drivers/gpu/drm/amd/display/dc/dcn301/Makefile
index 7aa628c21973..9002cb10a6ae 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn301/Makefile
+++ b/drivers/gpu/drm/amd/display/dc/dcn301/Makefile
@@ -11,7 +11,8 @@
 # Makefile for dcn30.
 
 DCN301 = dcn301_init.o dcn301_resource.o dcn301_dccg.o \
-		dcn301_dio_link_encoder.o dcn301_hwseq.o dcn301_panel_cntl.o dcn301_hubbub.o
+		dcn301_dio_link_encoder.o dcn301_hwseq.o dcn301_panel_cntl.o dcn301_hubbub.o \
+		dcn301_optc.o
 
 AMD_DAL_DCN301 = $(addprefix $(AMDDALPATH)/dc/dcn301/,$(DCN301))
 
diff --git a/drivers/gpu/drm/amd/display/dc/dcn301/dcn301_optc.c b/drivers/gpu/drm/amd/display/dc/dcn301/dcn301_optc.c
new file mode 100644
index 000000000000..b3cfcb887905
--- /dev/null
+++ b/drivers/gpu/drm/amd/display/dc/dcn301/dcn301_optc.c
@@ -0,0 +1,185 @@
+/*
+ * Copyright 2020 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: AMD
+ *
+ */
+
+#include "reg_helper.h"
+#include "dcn301_optc.h"
+#include "dc.h"
+#include "dcn_calc_math.h"
+#include "dc_dmub_srv.h"
+
+#include "dml/dcn30/dcn30_fpu.h"
+#include "dc_trace.h"
+
+#define REG(reg)\
+	optc1->tg_regs->reg
+
+#define CTX \
+	optc1->base.ctx
+
+#undef FN
+#define FN(reg_name, field_name) \
+	optc1->tg_shift->field_name, optc1->tg_mask->field_name
+
+
+/**
+ * optc301_set_drr() - Program dynamic refresh rate registers m_OTGx_OTG_V_TOTAL_*.
+ *
+ * @optc: timing_generator instance.
+ * @params: parameters used for Dynamic Refresh Rate.
+ */
+void optc301_set_drr(
+	struct timing_generator *optc,
+	const struct drr_params *params)
+{
+	struct optc *optc1 = DCN10TG_FROM_TG(optc);
+
+	if (params != NULL &&
+		params->vertical_total_max > 0 &&
+		params->vertical_total_min > 0) {
+
+		if (params->vertical_total_mid != 0) {
+
+			REG_SET(OTG_V_TOTAL_MID, 0,
+				OTG_V_TOTAL_MID, params->vertical_total_mid - 1);
+
+			REG_UPDATE_2(OTG_V_TOTAL_CONTROL,
+					OTG_VTOTAL_MID_REPLACING_MAX_EN, 1,
+					OTG_VTOTAL_MID_FRAME_NUM,
+					(uint8_t)params->vertical_total_mid_frame_num);
+
+		}
+
+		optc->funcs->set_vtotal_min_max(optc, params->vertical_total_min - 1, params->vertical_total_max - 1);
+
+		REG_UPDATE_5(OTG_V_TOTAL_CONTROL,
+				OTG_V_TOTAL_MIN_SEL, 1,
+				OTG_V_TOTAL_MAX_SEL, 1,
+				OTG_FORCE_LOCK_ON_EVENT, 0,
+				OTG_SET_V_TOTAL_MIN_MASK_EN, 0,
+				OTG_SET_V_TOTAL_MIN_MASK, 0);
+		// Setup manual flow control for EOF via TRIG_A
+		optc->funcs->setup_manual_trigger(optc);
+
+	} else {
+		REG_UPDATE_4(OTG_V_TOTAL_CONTROL,
+				OTG_SET_V_TOTAL_MIN_MASK, 0,
+				OTG_V_TOTAL_MIN_SEL, 0,
+				OTG_V_TOTAL_MAX_SEL, 0,
+				OTG_FORCE_LOCK_ON_EVENT, 0);
+
+		optc->funcs->set_vtotal_min_max(optc, 0, 0);
+	}
+}
+
+
+void optc301_setup_manual_trigger(struct timing_generator *optc)
+{
+	struct optc *optc1 = DCN10TG_FROM_TG(optc);
+
+	REG_SET_8(OTG_TRIGA_CNTL, 0,
+			OTG_TRIGA_SOURCE_SELECT, 21,
+			OTG_TRIGA_SOURCE_PIPE_SELECT, optc->inst,
+			OTG_TRIGA_RISING_EDGE_DETECT_CNTL, 1,
+			OTG_TRIGA_FALLING_EDGE_DETECT_CNTL, 0,
+			OTG_TRIGA_POLARITY_SELECT, 0,
+			OTG_TRIGA_FREQUENCY_SELECT, 0,
+			OTG_TRIGA_DELAY, 0,
+			OTG_TRIGA_CLEAR, 1);
+}
+
+static struct timing_generator_funcs dcn30_tg_funcs = {
+		.validate_timing = optc1_validate_timing,
+		.program_timing = optc1_program_timing,
+		.setup_vertical_interrupt0 = optc1_setup_vertical_interrupt0,
+		.setup_vertical_interrupt1 = optc1_setup_vertical_interrupt1,
+		.setup_vertical_interrupt2 = optc1_setup_vertical_interrupt2,
+		.program_global_sync = optc1_program_global_sync,
+		.enable_crtc = optc2_enable_crtc,
+		.disable_crtc = optc1_disable_crtc,
+		/* used by enable_timing_synchronization. Not need for FPGA */
+		.is_counter_moving = optc1_is_counter_moving,
+		.get_position = optc1_get_position,
+		.get_frame_count = optc1_get_vblank_counter,
+		.get_scanoutpos = optc1_get_crtc_scanoutpos,
+		.get_otg_active_size = optc1_get_otg_active_size,
+		.set_early_control = optc1_set_early_control,
+		/* used by enable_timing_synchronization. Not need for FPGA */
+		.wait_for_state = optc1_wait_for_state,
+		.set_blank_color = optc3_program_blank_color,
+		.did_triggered_reset_occur = optc1_did_triggered_reset_occur,
+		.triplebuffer_lock = optc3_triplebuffer_lock,
+		.triplebuffer_unlock = optc2_triplebuffer_unlock,
+		.enable_reset_trigger = optc1_enable_reset_trigger,
+		.enable_crtc_reset = optc1_enable_crtc_reset,
+		.disable_reset_trigger = optc1_disable_reset_trigger,
+		.lock = optc3_lock,
+		.unlock = optc1_unlock,
+		.lock_doublebuffer_enable = optc3_lock_doublebuffer_enable,
+		.lock_doublebuffer_disable = optc3_lock_doublebuffer_disable,
+		.enable_optc_clock = optc1_enable_optc_clock,
+		.set_drr = optc301_set_drr,
+		.get_last_used_drr_vtotal = optc2_get_last_used_drr_vtotal,
+		.set_vtotal_min_max = optc3_set_vtotal_min_max,
+		.set_static_screen_control = optc1_set_static_screen_control,
+		.program_stereo = optc1_program_stereo,
+		.is_stereo_left_eye = optc1_is_stereo_left_eye,
+		.tg_init = optc3_tg_init,
+		.is_tg_enabled = optc1_is_tg_enabled,
+		.is_optc_underflow_occurred = optc1_is_optc_underflow_occurred,
+		.clear_optc_underflow = optc1_clear_optc_underflow,
+		.setup_global_swap_lock = NULL,
+		.get_crc = optc1_get_crc,
+		.configure_crc = optc2_configure_crc,
+		.set_dsc_config = optc3_set_dsc_config,
+		.get_dsc_status = optc2_get_dsc_status,
+		.set_dwb_source = NULL,
+		.set_odm_bypass = optc3_set_odm_bypass,
+		.set_odm_combine = optc3_set_odm_combine,
+		.get_optc_source = optc2_get_optc_source,
+		.set_out_mux = optc3_set_out_mux,
+		.set_drr_trigger_window = optc3_set_drr_trigger_window,
+		.set_vtotal_change_limit = optc3_set_vtotal_change_limit,
+		.set_gsl = optc2_set_gsl,
+		.set_gsl_source_select = optc2_set_gsl_source_select,
+		.set_vtg_params = optc1_set_vtg_params,
+		.program_manual_trigger = optc2_program_manual_trigger,
+		.setup_manual_trigger = optc301_setup_manual_trigger,
+		.get_hw_timing = optc1_get_hw_timing,
+		.wait_drr_doublebuffer_pending_clear = optc3_wait_drr_doublebuffer_pending_clear,
+};
+
+void dcn301_timing_generator_init(struct optc *optc1)
+{
+	optc1->base.funcs = &dcn30_tg_funcs;
+
+	optc1->max_h_total = optc1->tg_mask->OTG_H_TOTAL + 1;
+	optc1->max_v_total = optc1->tg_mask->OTG_V_TOTAL + 1;
+
+	optc1->min_h_blank = 32;
+	optc1->min_v_blank = 3;
+	optc1->min_v_blank_interlace = 5;
+	optc1->min_h_sync_width = 4;
+	optc1->min_v_sync_width = 1;
+}
diff --git a/drivers/gpu/drm/amd/display/dc/dcn301/dcn301_optc.h b/drivers/gpu/drm/amd/display/dc/dcn301/dcn301_optc.h
new file mode 100644
index 000000000000..b49585682a15
--- /dev/null
+++ b/drivers/gpu/drm/amd/display/dc/dcn301/dcn301_optc.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright 2020 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: AMD
+ *
+ */
+
+#ifndef __DC_OPTC_DCN301_H__
+#define __DC_OPTC_DCN301_H__
+
+#include "dcn20/dcn20_optc.h"
+#include "dcn30/dcn30_optc.h"
+
+void dcn301_timing_generator_init(struct optc *optc1);
+void optc301_setup_manual_trigger(struct timing_generator *optc);
+void optc301_set_drr(struct timing_generator *optc, const struct drr_params *params);
+
+#endif /* __DC_OPTC_DCN301_H__ */
-- 
2.41.0

From ffd30f5fda1fc61b98b7e416d8c74daf59e0eb62 Mon Sep 17 00:00:00 2001
From: Aurabindo Pillai <aurabindo.pillai@xxxxxxx>
Date: Tue, 11 Jul 2023 14:14:43 -0400
Subject: [PATCH 1/2] drm/amd/display: export some optc function for reuse

[Why&How]
Make a few functions non static so that they can be reused for other
asic. This is in preparation for separating out OTG programming sequence
for DCN301

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@xxxxxxx>
---
 drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.c | 4 ++--
 drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.h | 3 +++
 2 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.c b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.c
index dfb8f62765f2..5bf4d0aa6230 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.c
@@ -215,7 +215,7 @@ void optc3_set_odm_bypass(struct timing_generator *optc,
 	optc1->opp_count = 1;
 }
 
-static void optc3_set_odm_combine(struct timing_generator *optc, int *opp_id, int opp_cnt,
+void optc3_set_odm_combine(struct timing_generator *optc, int *opp_id, int opp_cnt,
 		struct dc_crtc_timing *timing)
 {
 	struct optc *optc1 = DCN10TG_FROM_TG(optc);
@@ -293,7 +293,7 @@ static void optc3_set_timing_double_buffer(struct timing_generator *optc, bool e
 		   OTG_DRR_TIMING_DBUF_UPDATE_MODE, mode);
 }
 
-static void optc3_wait_drr_doublebuffer_pending_clear(struct timing_generator *optc)
+void optc3_wait_drr_doublebuffer_pending_clear(struct timing_generator *optc)
 {
 	struct optc *optc1 = DCN10TG_FROM_TG(optc);
 
diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.h b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.h
index fb06dc9a4893..d3a056c12b0d 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.h
+++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.h
@@ -351,6 +351,9 @@ void optc3_set_timing_db_mode(struct timing_generator *optc, bool enable);
 
 void optc3_set_odm_bypass(struct timing_generator *optc,
 		const struct dc_crtc_timing *dc_crtc_timing);
+void optc3_set_odm_combine(struct timing_generator *optc, int *opp_id, int opp_cnt,
+		struct dc_crtc_timing *timing);
+void optc3_wait_drr_doublebuffer_pending_clear(struct timing_generator *optc);
 void optc3_tg_init(struct timing_generator *optc);
 void optc3_set_vtotal_min_max(struct timing_generator *optc, int vtotal_min, int vtotal_max);
 #endif /* __DC_OPTC_DCN30_H__ */
-- 
2.41.0


[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux