On Wed, Jun 21, 2023 at 11:15:00AM -0500, Limonciello, Mario wrote:
>
> On 6/21/2023 10:39 AM, Johannes Berg wrote:
> > On Wed, 2023-06-21 at 17:36 +0200, Andrew Lunn wrote:
> > > On Wed, Jun 21, 2023 at 01:45:56PM +0800, Evan Quan wrote:
> > > > From: Mario Limonciello <mario.limonciello@xxxxxxx>
> > > >
> > > > Due to electrical and mechanical constraints in certain platform designs
> > > > there may be likely interference of relatively high-powered harmonics of
> > > > the (G-)DDR memory clocks with local radio module frequency bands used
> > > > by Wifi 6/6e/7.
> > > >
> > > > To mitigate this, AMD has introduced an ACPI based mechanism that
> > > > devices can use to notify active use of particular frequencies so
> > > > that devices can make relative internal adjustments as necessary
> > > > to avoid this resonance.
> > > Do only ACPI based systems have:
> > >
> > > interference of relatively high-powered harmonics of the (G-)DDR
> > > memory clocks with local radio module frequency bands used by
> > > Wifi 6/6e/7."
> > >
> > > Could Device Tree based systems not experience this problem?
> > They could, of course, but they'd need some other driver to change
> > _something_ in the system? I don't even know what this is doing
> > precisely under the hood in the ACPI BIOS, perhaps it adjusts the DDR
> > memory clock frequency in response to WiFi using a frequency that will
> > cause interference with harmonics.
>
> The way that WBRF has been architected, it's intended to be able
> to scale to any type of device pair that has harmonic issues.
So you set out to make something generic...
> In the first use (Wifi 6e + specific AMD dGPUs) that matches this
> series BIOS has the following purposes:
>
> 1) The existence of _DSM indicates that the system may not have
> adequate shielding and should be using these mitigations.
>
> 2) Notification mechanism of frequency use.
>
> For the first problematic devices we *could* have done notifications
> entirely in native Linux kernel code with notifier chains.
> However that still means you need a hint from the platform that the
> functionality is needed like a _DSD bit.
>
> It's also done this way so that AML could do some of the notifications
> directly to applicable devices in the future without needing "consumer"
> driver participation.
And then tie is very closely to ACPI.
Now, you are AMD, i get that ACPI is what you have. But i think as
kernel Maintainers, we need to consider that ACPI is not the only
thing used. Do we want the APIs to be agnostic? I think APIs used by
drivers should be agnostic.
Andrew
