This patch reverses the DPM clocks levels output of pp_dpm_mclk
and pp_dpm_fclk for renoir.
On dGPUs and older APUs we expose the levels from lowest clocks
to highest clocks. But for some APUs, the clocks levels are
given the reversed orders by PMFW. Like the memory DPM clocks
that are exposed by pp_dpm_mclk.
It's not intuitive that they are reversed on these APUs. All tools
and software that talks to the driver then has to know different ways
to interpret the data depending on the asic.
So we need to reverse them to expose the clocks levels from the
driver consistently.
Signed-off-by: Tim Huang <Tim.Huang@xxxxxxx>
---
drivers/gpu/drm/amd/pm/swsmu/smu12/renoir_ppt.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu12/renoir_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu12/renoir_ppt.c
index 5cdc07165480..8a8ba25c9ad7 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu12/renoir_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu12/renoir_ppt.c
@@ -494,7 +494,7 @@ static int renoir_set_fine_grain_gfx_freq_parameters(struct smu_context *smu)
static int renoir_print_clk_levels(struct smu_context *smu,
enum smu_clk_type clk_type, char *buf)
{
- int i, size = 0, ret = 0;
+ int i, idx, size = 0, ret = 0;
uint32_t cur_value = 0, value = 0, count = 0, min = 0, max = 0;
SmuMetrics_t metrics;
struct smu_dpm_context *smu_dpm_ctx = &(smu->smu_dpm);
@@ -594,7 +594,8 @@ static int renoir_print_clk_levels(struct smu_context *smu,
case SMU_VCLK:
case SMU_DCLK:
for (i = 0; i < count; i++) {
- ret = renoir_get_dpm_clk_limited(smu, clk_type, i, &value);
+ idx = (clk_type == SMU_FCLK || clk_type == SMU_MCLK) ? (count - i - 1) : i;
+ ret = renoir_get_dpm_clk_limited(smu, clk_type, idx, &value);
if (ret)
return ret;
if (!value)
--
2.34.1
