PMFW may boots the ASIC with a different power mode from the system's
real one. Notify PMFW explicitly the power mode the system in. This
is needed only when ACDC switch via gpio is not supported.
Signed-off-by: Evan Quan <evan.quan@xxxxxxx>
---
drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c | 18 +++++++++++++++++
.../gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c | 20 +------------------
.../drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c | 1 +
3 files changed, 20 insertions(+), 19 deletions(-)
diff --git a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
index 5633c5797e85..2ddf5198e5c4 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
@@ -733,6 +733,24 @@ static int smu_late_init(void *handle)
return ret;
}
+ /*
+ * Explicitly notify PMFW the power mode the system in. Since
+ * the PMFW may boot the ASIC with a different mode.
+ * For those supporting ACDC switch via gpio, PMFW will
+ * handle the switch automatically. Driver involvement
+ * is unnecessary.
+ */
+ if (!smu->dc_controlled_by_gpio) {
+ ret = smu_set_power_source(smu,
+ adev->pm.ac_power ? SMU_POWER_SOURCE_AC :
+ SMU_POWER_SOURCE_DC);
+ if (ret) {
+ dev_err(adev->dev, "Failed to switch to %s mode!\n",
+ adev->pm.ac_power ? "AC" : "DC");
+ return ret;
+ }
+ }
+
if ((adev->ip_versions[MP1_HWIP][0] == IP_VERSION(13, 0, 1)) ||
(adev->ip_versions[MP1_HWIP][0] == IP_VERSION(13, 0, 3)))
return 0;
diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c
index c4000518dc56..275f708db636 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c
@@ -3413,26 +3413,8 @@ static int navi10_post_smu_init(struct smu_context *smu)
return 0;
ret = navi10_run_umc_cdr_workaround(smu);
- if (ret) {
+ if (ret)
dev_err(adev->dev, "Failed to apply umc cdr workaround!\n");
- return ret;
- }
-
- if (!smu->dc_controlled_by_gpio) {
- /*
- * For Navi1X, manually switch it to AC mode as PMFW
- * may boot it with DC mode.
- */
- ret = smu_v11_0_set_power_source(smu,
- adev->pm.ac_power ?
- SMU_POWER_SOURCE_AC :
- SMU_POWER_SOURCE_DC);
- if (ret) {
- dev_err(adev->dev, "Failed to switch to %s mode!\n",
- adev->pm.ac_power ? "AC" : "DC");
- return ret;
- }
- }
return ret;
}
diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c
index 3d9ff46706fb..98a33f8ee209 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c
@@ -1770,6 +1770,7 @@ static const struct pptable_funcs smu_v13_0_7_ppt_funcs = {
.enable_mgpu_fan_boost = smu_v13_0_7_enable_mgpu_fan_boost,
.get_power_limit = smu_v13_0_7_get_power_limit,
.set_power_limit = smu_v13_0_set_power_limit,
+ .set_power_source = smu_v13_0_set_power_source,
.get_power_profile_mode = smu_v13_0_7_get_power_profile_mode,
.set_power_profile_mode = smu_v13_0_7_set_power_profile_mode,
.set_tool_table_location = smu_v13_0_set_tool_table_location,
--
2.34.1
