Re: [PATCH v2 1/3] drm/amdgpu: gfx_v11_0_cp_ecc_error_irq_funcs is not needed any more

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am 25.04.23 um 08:38 schrieb Horatio Zhang:
The gfx.cp_ecc_error_irq is retired in gfx11. In gfx_v11_0_hw_fini still
use amdgpu_irq_put to disable this interrupt, which caused the call trace
in this function.

[  102.873958] Call Trace:
[  102.873959]  <TASK>
[  102.873961]  gfx_v11_0_hw_fini+0x23/0x1e0 [amdgpu]
[  102.874019]  gfx_v11_0_suspend+0xe/0x20 [amdgpu]
[  102.874072]  amdgpu_device_ip_suspend_phase2+0x240/0x460 [amdgpu]
[  102.874122]  amdgpu_device_ip_suspend+0x3d/0x80 [amdgpu]
[  102.874172]  amdgpu_device_pre_asic_reset+0xd9/0x490 [amdgpu]
[  102.874223]  amdgpu_device_gpu_recover.cold+0x548/0xce6 [amdgpu]
[  102.874321]  amdgpu_debugfs_reset_work+0x4c/0x70 [amdgpu]
[  102.874375]  process_one_work+0x21f/0x3f0
[  102.874377]  worker_thread+0x200/0x3e0
[  102.874378]  ? process_one_work+0x3f0/0x3f0
[  102.874379]  kthread+0xfd/0x130
[  102.874380]  ? kthread_complete_and_exit+0x20/0x20
[  102.874381]  ret_from_fork+0x22/0x30

Signed-off-by: Horatio Zhang <Hongkun.Zhang@xxxxxxx>

This goes deeper than my understanding of the hw so I can't fully judge if this is correct or not.

But from the general idea looks good to me, so feel free to add my Acked-by.

Regards,
Christian.

---
  drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c | 38 --------------------------
  1 file changed, 38 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c
index 8a4c4769e607..e9491aec3cae 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c
@@ -1355,13 +1355,6 @@ static int gfx_v11_0_sw_init(void *handle)
  	if (r)
  		return r;
- /* ECC error */
-	r = amdgpu_irq_add_id(adev, SOC21_IH_CLIENTID_GRBM_CP,
-				  GFX_11_0_0__SRCID__CP_ECC_ERROR,
-				  &adev->gfx.cp_ecc_error_irq);
-	if (r)
-		return r;
-
  	/* FED error */
  	r = amdgpu_irq_add_id(adev, SOC21_IH_CLIENTID_GFX,
  				  GFX_11_0_0__SRCID__RLC_GC_FED_INTERRUPT,
@@ -4483,7 +4476,6 @@ static int gfx_v11_0_hw_fini(void *handle)
  	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
  	int r;
- amdgpu_irq_put(adev, &adev->gfx.cp_ecc_error_irq, 0);
  	amdgpu_irq_put(adev, &adev->gfx.priv_reg_irq, 0);
  	amdgpu_irq_put(adev, &adev->gfx.priv_inst_irq, 0);
@@ -5970,28 +5962,6 @@ static void gfx_v11_0_set_compute_eop_interrupt_state(struct amdgpu_device *adev
  		WREG32_SOC15_IP(GC, reg_addr, tmp); \
  	} while (0)
-static int gfx_v11_0_set_cp_ecc_error_state(struct amdgpu_device *adev,
-							struct amdgpu_irq_src *source,
-							unsigned type,
-							enum amdgpu_interrupt_state state)
-{
-	uint32_t ecc_irq_state = 0;
-	uint32_t pipe0_int_cntl_addr = 0;
-	int i = 0;
-
-	ecc_irq_state = (state == AMDGPU_IRQ_STATE_ENABLE) ? 1 : 0;
-
-	pipe0_int_cntl_addr = SOC15_REG_OFFSET(GC, 0, regCP_ME1_PIPE0_INT_CNTL);
-
-	WREG32_FIELD15_PREREG(GC, 0, CP_INT_CNTL_RING0, CP_ECC_ERROR_INT_ENABLE, ecc_irq_state);
-
-	for (i = 0; i < adev->gfx.mec.num_pipe_per_mec; i++)
-		SET_ECC_ME_PIPE_STATE(pipe0_int_cntl_addr + i * CP_ME1_PIPE_INST_ADDR_INTERVAL,
-					ecc_irq_state);
-
-	return 0;
-}
-
  static int gfx_v11_0_set_eop_interrupt_state(struct amdgpu_device *adev,
  					    struct amdgpu_irq_src *src,
  					    unsigned type,
@@ -6408,11 +6378,6 @@ static const struct amdgpu_irq_src_funcs gfx_v11_0_priv_inst_irq_funcs = {
  	.process = gfx_v11_0_priv_inst_irq,
  };
-static const struct amdgpu_irq_src_funcs gfx_v11_0_cp_ecc_error_irq_funcs = {
-	.set = gfx_v11_0_set_cp_ecc_error_state,
-	.process = amdgpu_gfx_cp_ecc_error_irq,
-};
-
  static const struct amdgpu_irq_src_funcs gfx_v11_0_rlc_gc_fed_irq_funcs = {
  	.process = gfx_v11_0_rlc_gc_fed_irq,
  };
@@ -6428,9 +6393,6 @@ static void gfx_v11_0_set_irq_funcs(struct amdgpu_device *adev)
  	adev->gfx.priv_inst_irq.num_types = 1;
  	adev->gfx.priv_inst_irq.funcs = &gfx_v11_0_priv_inst_irq_funcs;
- adev->gfx.cp_ecc_error_irq.num_types = 1; /* CP ECC error */
-	adev->gfx.cp_ecc_error_irq.funcs = &gfx_v11_0_cp_ecc_error_irq_funcs;
-
  	adev->gfx.rlc_gc_fed_irq.num_types = 1; /* 0x80 FED error */
  	adev->gfx.rlc_gc_fed_irq.funcs = &gfx_v11_0_rlc_gc_fed_irq_funcs;




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux