[PATCH] drm/amd/display: remove unused variables dispclk_delay_subtotal and dout

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



clang with W=1 reports
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn314/display_rq_dlg_calc_314.c:1003:15:
  error: variable 'dispclk_delay_subtotal' set but not used [-Werror,-Wunused-but-set-variable]
        unsigned int dispclk_delay_subtotal;
                     ^
This variable is not used, so remove it.
Which made dout unused, so also remove.

Signed-off-by: Tom Rix <trix@xxxxxxxxxx>
---
 .../display/dc/dml/dcn314/display_rq_dlg_calc_314.c    | 10 ----------
 1 file changed, 10 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn314/display_rq_dlg_calc_314.c b/drivers/gpu/drm/amd/display/dc/dml/dcn314/display_rq_dlg_calc_314.c
index ea4eb66066c4..239cb8160c77 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn314/display_rq_dlg_calc_314.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn314/display_rq_dlg_calc_314.c
@@ -951,7 +951,6 @@ static void dml_rq_dlg_get_dlg_params(
 {
 	const display_pipe_source_params_st *src = &e2e_pipe_param[pipe_idx].pipe.src;
 	const display_pipe_dest_params_st *dst = &e2e_pipe_param[pipe_idx].pipe.dest;
-	const display_output_params_st *dout = &e2e_pipe_param[pipe_idx].dout;
 	const display_clocks_and_cfg_st *clks = &e2e_pipe_param[pipe_idx].clks_cfg;
 	const scaler_ratio_depth_st *scl = &e2e_pipe_param[pipe_idx].pipe.scale_ratio_depth;
 	const scaler_taps_st *taps = &e2e_pipe_param[pipe_idx].pipe.scale_taps;
@@ -1000,8 +999,6 @@ static void dml_rq_dlg_get_dlg_params(
 	unsigned int vupdate_width;
 	unsigned int vready_offset;
 
-	unsigned int dispclk_delay_subtotal;
-
 	unsigned int vstartup_start;
 	unsigned int dst_x_after_scaler;
 	unsigned int dst_y_after_scaler;
@@ -1127,13 +1124,6 @@ static void dml_rq_dlg_get_dlg_params(
 	vupdate_offset = dst->vupdate_offset;
 	vupdate_width = dst->vupdate_width;
 	vready_offset = dst->vready_offset;
-	dispclk_delay_subtotal = mode_lib->ip.dispclk_delay_subtotal;
-
-	if (dout->dsc_enable) {
-		double dsc_delay = get_dsc_delay(mode_lib, e2e_pipe_param, num_pipes, pipe_idx); // FROM VBA
-
-		dispclk_delay_subtotal += dsc_delay;
-	}
 
 	vstartup_start = dst->vstartup_start;
 	if (interlaced) {
-- 
2.27.0




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux