[PATCH] drm/amd/display : Log DP link training downspread info

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Update the existing log with DP LT downspread info:

[Downstream devices shall support down spreading of the link clock.
The down-spread amplitude shall either be disabled (0.0%) or up to 0.5%,
as written by the upstream device to the DOWNSPREAD_CTRL register
(DPCD 00107h). The modulation frequency range shall be 30 to 33 kHz]

Besides, fix checkpatch warning:

CHECK: Alignment should match open parenthesis

Cc: Mario Limonciello <mario.limonciello@xxxxxxx>
Cc: Harry Wentland <harry.wentland@xxxxxxx>
Cc: Leo Li <sunpeng.li@xxxxxxx>
Cc: Alex Deucher <alexander.deucher@xxxxxxx>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@xxxxxxx>
---
 .../display/dc/link/protocols/link_dp_training.c   | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_training.c b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_training.c
index 70fc0ddf2d7e..2d067a4a8517 100644
--- a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_training.c
+++ b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_training.c
@@ -1560,9 +1560,10 @@ bool perform_link_training_with_retries(
 	j = 0;
 	while (j < attempts && fail_count < (attempts * 10)) {
 
-		DC_LOG_HW_LINK_TRAINING("%s: Beginning link(%d) training attempt %u of %d @ rate(%d) x lane(%d)\n",
-			__func__, link->link_index, (unsigned int)j + 1, attempts, cur_link_settings.link_rate,
-			cur_link_settings.lane_count);
+		DC_LOG_HW_LINK_TRAINING("%s: Beginning link(%d) training attempt %u of %d @ rate(%d) x lane(%d) @ spread = %x\n",
+					__func__, link->link_index, (unsigned int)j + 1, attempts,
+				       cur_link_settings.link_rate, cur_link_settings.lane_count,
+				       cur_link_settings.link_spread);
 
 		dp_enable_link_phy(
 			link,
@@ -1640,9 +1641,10 @@ bool perform_link_training_with_retries(
 				break;
 		}
 
-		DC_LOG_WARNING("%s: Link(%d) training attempt %u of %d failed @ rate(%d) x lane(%d) : fail reason:(%d)\n",
-			__func__, link->link_index, (unsigned int)j + 1, attempts, cur_link_settings.link_rate,
-			cur_link_settings.lane_count, status);
+		DC_LOG_WARNING("%s: Link(%d) training attempt %u of %d failed @ rate(%d) x lane(%d) @ spread = %x : fail reason:(%d)\n",
+			       __func__, link->link_index, (unsigned int)j + 1, attempts,
+			      cur_link_settings.link_rate, cur_link_settings.lane_count,
+			      cur_link_settings.link_spread, status);
 
 		dp_disable_link_phy(link, &pipe_ctx->link_res, signal);
 
-- 
2.25.1




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux