RE: [PATCH] drm/amd/pm: re-enable the gfx imu when smu resume

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> -----Original Message-----
> From: amd-gfx <amd-gfx-bounces@xxxxxxxxxxxxxxxxxxxxx> On Behalf Of Tim
> Huang
> Sent: Friday, March 24, 2023 3:08 PM
> To: amd-gfx@xxxxxxxxxxxxxxxxxxxxx
> Cc: Deucher, Alexander <Alexander.Deucher@xxxxxxx>; Zhang, Yifan
> <Yifan1.Zhang@xxxxxxx>; Ma, Li <Li.Ma@xxxxxxx>; Du, Xiaojian
> <Xiaojian.Du@xxxxxxx>; Huang, Tim <Tim.Huang@xxxxxxx>
> Subject: [PATCH] drm/amd/pm: re-enable the gfx imu when smu resume
> 
> If the gfx imu is poweroff when suspend, then it need to be re-enabled when
> resume.
> 
> Signed-off-by: Tim Huang <tim.huang@xxxxxxx>
> ---
>  drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c | 40 ++++++++++++++++-
> ------
>  1 file changed, 28 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
> b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
> index b5d64749990e..94fe8593444a 100644
> --- a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
> +++ b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
> @@ -162,10 +162,15 @@ int smu_get_dpm_freq_range(struct smu_context
> *smu,
> 
>  int smu_set_gfx_power_up_by_imu(struct smu_context *smu)  {
> -	if (!smu->ppt_funcs || !smu->ppt_funcs->set_gfx_power_up_by_imu)
> -		return -EOPNOTSUPP;
> +	int ret = 0;
> +	struct amdgpu_device *adev = smu->adev;
> 
> -	return smu->ppt_funcs->set_gfx_power_up_by_imu(smu);
> +	if (smu->ppt_funcs->set_gfx_power_up_by_imu) {
> +		ret = smu->ppt_funcs->set_gfx_power_up_by_imu(smu);
> +		if (ret)
> +			dev_err(adev->dev, "Failed to enable gfx imu!\n");
> +	}
> +	return ret;
>  }
> 
>  static u32 smu_get_mclk(void *handle, bool low) @@ -196,6 +201,19 @@
> static u32 smu_get_sclk(void *handle, bool low)
>  	return clk_freq * 100;
>  }
> 
> +static int smu_set_gfx_imu_enable(struct smu_context *smu) {
> +	struct amdgpu_device *adev = smu->adev;
> +
> +	if (adev->firmware.load_type != AMDGPU_FW_LOAD_PSP)
> +		return 0;
> +
> +	if (amdgpu_in_reset(smu->adev) || adev->in_s0ix)
> +		return 0;
> +
> +	return smu_set_gfx_power_up_by_imu(smu); }
> +
>  static int smu_dpm_set_vcn_enable(struct smu_context *smu,
>  				  bool enable)
>  {
> @@ -1396,15 +1414,9 @@ static int smu_hw_init(void *handle)
>  	}
> 
>  	if (smu->is_apu) {
> -		if ((smu->ppt_funcs->set_gfx_power_up_by_imu) &&
> -				likely(adev->firmware.load_type ==
> AMDGPU_FW_LOAD_PSP)) {
> -			ret = smu->ppt_funcs-
> >set_gfx_power_up_by_imu(smu);
> -			if (ret) {
> -				dev_err(adev->dev, "Failed to Enable gfx
> imu!\n");
> -				return ret;
> -			}
> -		}
> -
> +		ret = smu_set_gfx_imu_enable(smu);
> +		if (ret)
> +			return ret;
>  		smu_dpm_set_vcn_enable(smu, true);
>  		smu_dpm_set_jpeg_enable(smu, true);
>  		smu_set_gfx_cgpg(smu, true);
> @@ -1681,6 +1693,10 @@ static int smu_resume(void *handle)
>  		return ret;
>  	}
> 
> +	ret = smu_set_gfx_imu_enable(smu);
> +	if (ret)
> +		return ret;

smu_set_gfx_imu_enable in smu_hw_init is valid when sum->is_apu is true. So such check is still necessary in smu_resume?

Regards,
Guchun

>  	smu_set_gfx_cgpg(smu, true);
> 
>  	smu->disable_uclk_switch = 0;
> --
> 2.25.1





[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux