From: Agustin Gutierrez <agustin.gutierrez@xxxxxxx>
[Why]
Current hotplug sequence causes temporary hang at the re-entry of the
optimized power state.
[How]
Keep a PHY active when detecting DP signal + DPMS active
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@xxxxxxx>
Acked-by: Qingqing Zhuo <qingqing.zhuo@xxxxxxx>
Signed-off-by: Agustin Gutierrez <agustin.gutierrez@xxxxxxx>
---
.../gpu/drm/amd/display/dc/clk_mgr/dcn314/dcn314_clk_mgr.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn314/dcn314_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn314/dcn314_clk_mgr.c
index 89df7244b272..5cb44f838bde 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn314/dcn314_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn314/dcn314_clk_mgr.c
@@ -108,6 +108,11 @@ static int dcn314_get_active_display_cnt_wa(
stream->signal == SIGNAL_TYPE_DVI_SINGLE_LINK ||
stream->signal == SIGNAL_TYPE_DVI_DUAL_LINK)
tmds_present = true;
+
+ /* Checking stream / link detection ensuring that PHY is active*/
+ if (dc_is_dp_signal(stream->signal) && !stream->dpms_off)
+ display_count++;
+
}
for (i = 0; i < dc->link_count; i++) {
--
2.34.1
