Re: [RFC PATCH 5/9] apple-gmux: Use GMSP acpi method for interrupt clear

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 2/10/23 05:48, Orlando Chamberlain wrote:
> This is needed for interrupts to be cleared correctly on MMIO based
> gmux's. It is untested if this helps/hinders other gmux types, but I
> have seen the GMSP method in the acpi tables of a MacBook with an
> indexed gmux.
> 
> If this turns out to break support for older gmux's, this can instead
> be only done on MMIO gmux's.
> 
> There is also a "GMLV" acpi method, and the "GMSP" method can be called
> with 1 as its argument, but the purposes of these aren't known and they
> don't seem to be needed.
> 
> Signed-off-by: Orlando Chamberlain <orlandoch.dev@xxxxxxxxx>
> ---
>  drivers/platform/x86/apple-gmux.c | 26 +++++++++++++++++++++++++-
>  1 file changed, 25 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/platform/x86/apple-gmux.c b/drivers/platform/x86/apple-gmux.c
> index 760434a527c1..c605f036ea0b 100644
> --- a/drivers/platform/x86/apple-gmux.c
> +++ b/drivers/platform/x86/apple-gmux.c
> @@ -494,8 +494,29 @@ static const struct apple_gmux_config apple_gmux_index = {
>   * MCP79, on all following generations it's GPIO pin 6 of the Intel PCH.
>   * The GPE merely signals that an interrupt occurred, the actual type of event
>   * is identified by reading a gmux register.
> + *
> + * On MMIO gmux's, we also need to call the acpi method GMSP to properly clear
> + * interrupts. TODO: Do other types need this? Does this break other types?
>   */
>  
> +static int gmux_call_acpi_gmsp(struct apple_gmux_data *gmux_data, int arg)
> +{
> +	acpi_status status = AE_OK;
> +	union acpi_object arg0 = { ACPI_TYPE_INTEGER };
> +	struct acpi_object_list arg_list = { 1, &arg0 };
> +
> +	arg0.integer.value = arg;
> +
> +	status = acpi_evaluate_object(gmux_data->dhandle, "GMSP", &arg_list, NULL);
> +	if (ACPI_FAILURE(status)) {
> +		pr_err("GMSP call failed: %s\n",
> +		       acpi_format_exception(status));
> +		return -ENODEV;
> +	}
> +
> +	return 0;
> +}
> +
>  static inline void gmux_disable_interrupts(struct apple_gmux_data *gmux_data)
>  {
>  	gmux_write8(gmux_data, GMUX_PORT_INTERRUPT_ENABLE,
> @@ -519,7 +540,10 @@ static void gmux_clear_interrupts(struct apple_gmux_data *gmux_data)
>  
>  	/* to clear interrupts write back current status */
>  	status = gmux_interrupt_get_status(gmux_data);
> -	gmux_write8(gmux_data, GMUX_PORT_INTERRUPT_STATUS, status);
> +	if (status) {
> +		gmux_write8(gmux_data, GMUX_PORT_INTERRUPT_STATUS, status);
> +		gmux_call_acpi_gmsp(gmux_data, 0);

Ugh no, please don't go around calling random ACPI methods from untested
firmware revisions / device models.

ACPI code (even Apple's I have learned) tends to be full of bugs. If we
did not need to call GMSP before then please lets keep not calling it
on the older models. Just because it is there does not mean that calling
it is useful, it might even be harmful.

Regards,

Hans






> +	}
>  }
>  
>  static void gmux_notify_handler(acpi_handle device, u32 value, void *context)




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux