[PATCH 07/29] drm/amd/display: Program pipes for ODM when removing planes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Dillon Varone <Dillon.Varone@xxxxxxx>

[WHY?]
Software state expects pipes to be configured for ODM, but due to the transition
occurring on a plane disable, the ODM enablement code is not run.

[HOW?]
Update ODM when removing a plane, and dynamic ODM is active. Also acquire pipe
lock when removing a plane.

Reviewed-by: Alvin Lee <Alvin.Lee2@xxxxxxx>
Acked-by: Tom Chung <chiahsuan.chung@xxxxxxx>
Signed-off-by: Dillon Varone <Dillon.Varone@xxxxxxx>
---
 .../gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c |  4 +++-
 drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c    | 11 +++++++++++
 2 files changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
index 11e4c4e46947..587b04b8712d 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
@@ -97,10 +97,12 @@ void dcn10_lock_all_pipes(struct dc *dc,
 	bool lock)
 {
 	struct pipe_ctx *pipe_ctx;
+	struct pipe_ctx *old_pipe_ctx;
 	struct timing_generator *tg;
 	int i;
 
 	for (i = 0; i < dc->res_pool->pipe_count; i++) {
+		old_pipe_ctx = &dc->current_state->res_ctx.pipe_ctx[i];
 		pipe_ctx = &context->res_ctx.pipe_ctx[i];
 		tg = pipe_ctx->stream_res.tg;
 
@@ -110,7 +112,7 @@ void dcn10_lock_all_pipes(struct dc *dc,
 		 */
 		if (pipe_ctx->top_pipe ||
 		    !pipe_ctx->stream ||
-		    !pipe_ctx->plane_state ||
+		    (!pipe_ctx->plane_state && !old_pipe_ctx->plane_state) ||
 		    !tg->funcs->is_tg_enabled(tg))
 			continue;
 
diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
index b465a83bde6f..64fcb378594f 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
@@ -1834,6 +1834,17 @@ void dcn20_program_front_end_for_ctx(
 			context->stream_status[0].plane_count > 1) {
 			pipe->plane_res.hubp->funcs->hubp_wait_pipe_read_start(pipe->plane_res.hubp);
 		}
+
+		/* when dynamic ODM is active, pipes must be reconfigured when all planes are
+		 * disabled, as some transitions will leave software and hardware state
+		 * mismatched.
+		 */
+		if (dc->debug.enable_single_display_2to1_odm_policy &&
+			pipe->stream &&
+			pipe->update_flags.bits.disable &&
+			!pipe->prev_odm_pipe &&
+			hws->funcs.update_odm)
+			hws->funcs.update_odm(dc, context, pipe);
 	}
 }
 
-- 
2.25.1




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux