From: Nicholas Kazlauskas <nicholas.kazlauskas@xxxxxxx>
[Why]
The link enablement sequence can end up resetting the encoder while
the PHY symclk isn't yet on.
This means that waiting for symclk on will timeout, along with the reset
bit never asserting high.
This causes unnecessary delay when enabling the link and produces a
warning affecting multiple IGT tests.
[How]
Don't wait for the symclk to be on here because firmware already does.
Don't wait for reset if we know the symclk isn't on.
Split the reset into a helper function that checks the bit and decides
whether or not a delay is sufficient.
Reviewed-by: Roman Li <Roman.Li@xxxxxxx>
Acked-by: Alan Liu <HaoPing.Liu@xxxxxxx>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@xxxxxxx>
---
.../dc/dcn314/dcn314_dio_stream_encoder.c | 24 ++++++++++++++-----
1 file changed, 18 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_dio_stream_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_dio_stream_encoder.c
index 7e773bf7b895..38842f938bed 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_dio_stream_encoder.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_dio_stream_encoder.c
@@ -49,18 +49,30 @@
#define CTX \
enc1->base.ctx
+static void enc314_reset_fifo(struct stream_encoder *enc, bool reset)
+{
+ struct dcn10_stream_encoder *enc1 = DCN10STRENC_FROM_STRENC(enc);
+ uint32_t reset_val = reset ? 1 : 0;
+ uint32_t is_symclk_on;
+
+ REG_UPDATE(DIG_FIFO_CTRL0, DIG_FIFO_RESET, reset_val);
+ REG_GET(DIG_FE_CNTL, DIG_SYMCLK_FE_ON, &is_symclk_on);
+
+ if (is_symclk_on)
+ REG_WAIT(DIG_FIFO_CTRL0, DIG_FIFO_RESET_DONE, reset_val, 10, 5000);
+ else
+ udelay(10);
+}
static void enc314_enable_fifo(struct stream_encoder *enc)
{
struct dcn10_stream_encoder *enc1 = DCN10STRENC_FROM_STRENC(enc);
- /* TODO: Confirm if we need to wait for DIG_SYMCLK_FE_ON */
- REG_WAIT(DIG_FE_CNTL, DIG_SYMCLK_FE_ON, 1, 10, 5000);
REG_UPDATE(DIG_FIFO_CTRL0, DIG_FIFO_READ_START_LEVEL, 0x7);
- REG_UPDATE(DIG_FIFO_CTRL0, DIG_FIFO_RESET, 1);
- REG_WAIT(DIG_FIFO_CTRL0, DIG_FIFO_RESET_DONE, 1, 10, 5000);
- REG_UPDATE(DIG_FIFO_CTRL0, DIG_FIFO_RESET, 0);
- REG_WAIT(DIG_FIFO_CTRL0, DIG_FIFO_RESET_DONE, 0, 10, 5000);
+
+ enc314_reset_fifo(enc, true);
+ enc314_reset_fifo(enc, false);
+
REG_UPDATE(DIG_FIFO_CTRL0, DIG_FIFO_ENABLE, 1);
}
--
2.25.1
