From: Aric Cyr <aric.cyr@xxxxxxx>
[why]
Only a single VLINE interrupt is available so interface should not
expose the second one which is used by DMU firmware.
[how]
Remove references to periodic_interrupt1 and VLINE1 from DC interfaces.
Reviewed-by: Jaehyun Chung <jaehyun.chung@xxxxxxx>
Acked-by: Jasdeep Dhillon <jdhillon@xxxxxxx>
Signed-off-by: Aric Cyr <aric.cyr@xxxxxxx>
---
drivers/gpu/drm/amd/display/dc/core/dc.c | 16 +++------
drivers/gpu/drm/amd/display/dc/dc_stream.h | 6 ++--
.../amd/display/dc/dcn10/dcn10_hw_sequencer.c | 35 ++++++-------------
.../amd/display/dc/dcn10/dcn10_hw_sequencer.h | 3 +-
.../gpu/drm/amd/display/dc/inc/hw_sequencer.h | 8 +----
5 files changed, 18 insertions(+), 50 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index 390adc00cd28..d93393cc66c0 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -2768,11 +2768,8 @@ static void copy_stream_update_to_stream(struct dc *dc,
if (update->abm_level)
stream->abm_level = *update->abm_level;
- if (update->periodic_interrupt0)
- stream->periodic_interrupt0 = *update->periodic_interrupt0;
-
- if (update->periodic_interrupt1)
- stream->periodic_interrupt1 = *update->periodic_interrupt1;
+ if (update->periodic_interrupt)
+ stream->periodic_interrupt = *update->periodic_interrupt;
if (update->gamut_remap)
stream->gamut_remap_matrix = *update->gamut_remap;
@@ -2992,13 +2989,8 @@ static void commit_planes_do_stream_update(struct dc *dc,
if (!pipe_ctx->top_pipe && !pipe_ctx->prev_odm_pipe && pipe_ctx->stream == stream) {
- if (stream_update->periodic_interrupt0 &&
- dc->hwss.setup_periodic_interrupt)
- dc->hwss.setup_periodic_interrupt(dc, pipe_ctx, VLINE0);
-
- if (stream_update->periodic_interrupt1 &&
- dc->hwss.setup_periodic_interrupt)
- dc->hwss.setup_periodic_interrupt(dc, pipe_ctx, VLINE1);
+ if (stream_update->periodic_interrupt && dc->hwss.setup_periodic_interrupt)
+ dc->hwss.setup_periodic_interrupt(dc, pipe_ctx);
if ((stream_update->hdr_static_metadata && !stream->use_dynamic_meta) ||
stream_update->vrr_infopacket ||
diff --git a/drivers/gpu/drm/amd/display/dc/dc_stream.h b/drivers/gpu/drm/amd/display/dc/dc_stream.h
index 9fcf9dc5bce4..9e6025c98db9 100644
--- a/drivers/gpu/drm/amd/display/dc/dc_stream.h
+++ b/drivers/gpu/drm/amd/display/dc/dc_stream.h
@@ -212,8 +212,7 @@ struct dc_stream_state {
/* DMCU info */
unsigned int abm_level;
- struct periodic_interrupt_config periodic_interrupt0;
- struct periodic_interrupt_config periodic_interrupt1;
+ struct periodic_interrupt_config periodic_interrupt;
/* from core_stream struct */
struct dc_context *ctx;
@@ -281,8 +280,7 @@ struct dc_stream_update {
struct dc_info_packet *hdr_static_metadata;
unsigned int *abm_level;
- struct periodic_interrupt_config *periodic_interrupt0;
- struct periodic_interrupt_config *periodic_interrupt1;
+ struct periodic_interrupt_config *periodic_interrupt;
struct dc_info_packet *vrr_infopacket;
struct dc_info_packet *vsc_infopacket;
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
index 287fdecc0b10..72521749c01d 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
@@ -3812,7 +3812,7 @@ void dcn10_calc_vupdate_position(
{
const struct dc_crtc_timing *dc_crtc_timing = &pipe_ctx->stream->timing;
int vline_int_offset_from_vupdate =
- pipe_ctx->stream->periodic_interrupt0.lines_offset;
+ pipe_ctx->stream->periodic_interrupt.lines_offset;
int vupdate_offset_from_vsync = dc->hwss.get_vupdate_offset_from_vsync(pipe_ctx);
int start_position;
@@ -3837,18 +3837,10 @@ void dcn10_calc_vupdate_position(
static void dcn10_cal_vline_position(
struct dc *dc,
struct pipe_ctx *pipe_ctx,
- enum vline_select vline,
uint32_t *start_line,
uint32_t *end_line)
{
- enum vertical_interrupt_ref_point ref_point = INVALID_POINT;
-
- if (vline == VLINE0)
- ref_point = pipe_ctx->stream->periodic_interrupt0.ref_point;
- else if (vline == VLINE1)
- ref_point = pipe_ctx->stream->periodic_interrupt1.ref_point;
-
- switch (ref_point) {
+ switch (pipe_ctx->stream->periodic_interrupt.ref_point) {
case START_V_UPDATE:
dcn10_calc_vupdate_position(
dc,
@@ -3857,7 +3849,9 @@ static void dcn10_cal_vline_position(
end_line);
break;
case START_V_SYNC:
- // Suppose to do nothing because vsync is 0;
+ // vsync is line 0 so start_line is just the requested line offset
+ *start_line = pipe_ctx->stream->periodic_interrupt.lines_offset;
+ *end_line = *start_line + 2;
break;
default:
ASSERT(0);
@@ -3867,24 +3861,15 @@ static void dcn10_cal_vline_position(
void dcn10_setup_periodic_interrupt(
struct dc *dc,
- struct pipe_ctx *pipe_ctx,
- enum vline_select vline)
+ struct pipe_ctx *pipe_ctx)
{
struct timing_generator *tg = pipe_ctx->stream_res.tg;
+ uint32_t start_line = 0;
+ uint32_t end_line = 0;
- if (vline == VLINE0) {
- uint32_t start_line = 0;
- uint32_t end_line = 0;
+ dcn10_cal_vline_position(dc, pipe_ctx, &start_line, &end_line);
- dcn10_cal_vline_position(dc, pipe_ctx, vline, &start_line, &end_line);
-
- tg->funcs->setup_vertical_interrupt0(tg, start_line, end_line);
-
- } else if (vline == VLINE1) {
- pipe_ctx->stream_res.tg->funcs->setup_vertical_interrupt1(
- tg,
- pipe_ctx->stream->periodic_interrupt1.lines_offset);
- }
+ tg->funcs->setup_vertical_interrupt0(tg, start_line, end_line);
}
void dcn10_setup_vupdate_interrupt(struct dc *dc, struct pipe_ctx *pipe_ctx)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.h b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.h
index 9ae07c77fdc0..0ef7bf7ddb75 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.h
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.h
@@ -175,8 +175,7 @@ void dcn10_set_cursor_attribute(struct pipe_ctx *pipe_ctx);
void dcn10_set_cursor_sdr_white_level(struct pipe_ctx *pipe_ctx);
void dcn10_setup_periodic_interrupt(
struct dc *dc,
- struct pipe_ctx *pipe_ctx,
- enum vline_select vline);
+ struct pipe_ctx *pipe_ctx);
enum dc_status dcn10_set_clock(struct dc *dc,
enum dc_clock_type clock_type,
uint32_t clk_khz,
diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw_sequencer.h b/drivers/gpu/drm/amd/display/dc/inc/hw_sequencer.h
index 60cbd423c911..d04b68dad413 100644
--- a/drivers/gpu/drm/amd/display/dc/inc/hw_sequencer.h
+++ b/drivers/gpu/drm/amd/display/dc/inc/hw_sequencer.h
@@ -32,11 +32,6 @@
#include "inc/hw/link_encoder.h"
#include "core_status.h"
-enum vline_select {
- VLINE0,
- VLINE1
-};
-
struct pipe_ctx;
struct dc_state;
struct dc_stream_status;
@@ -118,8 +113,7 @@ struct hw_sequencer_funcs {
int group_index, int group_size,
struct pipe_ctx *grouped_pipes[]);
void (*setup_periodic_interrupt)(struct dc *dc,
- struct pipe_ctx *pipe_ctx,
- enum vline_select vline);
+ struct pipe_ctx *pipe_ctx);
void (*set_drr)(struct pipe_ctx **pipe_ctx, int num_pipes,
struct dc_crtc_timing_adjust adjust);
void (*set_static_screen_control)(struct pipe_ctx **pipe_ctx,
--
2.25.1
