RE: [PATCH v3 2/3] drm/amdgpu_dm: Rely on split out luminance calculation function

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



[Public]

> -----Original Message-----
> From: amd-gfx <amd-gfx-bounces@xxxxxxxxxxxxxxxxxxxxx> On Behalf Of Jani
> Nikula
> Sent: Thursday, August 4, 2022 5:55 AM
> To: Jouni Högander <jouni.hogander@xxxxxxxxx>; dri-
> devel@xxxxxxxxxxxxxxxxxxxxx; intel-gfx@xxxxxxxxxxxxxxxxxxxxx; amd-
> gfx@xxxxxxxxxxxxxxxxxxxxx
> Cc: Siqueira, Rodrigo <Rodrigo.Siqueira@xxxxxxx>; Li, Roman
> <Roman.Li@xxxxxxx>; Manasi Navare <manasi.d.navare@xxxxxxxxx>; Mika
> Kahola <mika.kahola@xxxxxxxxx>; Jouni Högander
> <jouni.hogander@xxxxxxxxx>; Wentland, Harry
> <Harry.Wentland@xxxxxxx>
> Subject: Re: [PATCH v3 2/3] drm/amdgpu_dm: Rely on split out luminance
> calculation function
> 
> On Tue, 19 Jul 2022, Jouni Högander <jouni.hogander@xxxxxxxxx> wrote:
> > Luminance range calculation was split out into drm_edid.c and is now
> > part of edid parsing. Rely on values calculated during edid parsing
> > and use these for caps->aux_max_input_signal and caps-
> >aux_min_input_signal.
> 
> Harry, I'll merge patches 1 & 3 in this series through drm-misc-next, because I
> think they're good to go, and fix stuff in i915.
> 
> Can I get your rb/ack to merge this patch as well, or do you want to take this
> later via your tree?

You can take this via drm-misc.
Acked-by: Alex Deucher <alexander.deucher@xxxxxxx>


> 
> BR,
> Jani.
> 
> 
> >
> > v2: Use values calculated during edid parsing
> >
> > Cc: Roman Li <roman.li@xxxxxxx>
> > Cc: Rodrigo Siqueira <Rodrigo.Siqueira@xxxxxxx>
> > Cc: Harry Wentland <harry.wentland@xxxxxxx>
> > Cc: Lyude Paul <lyude@xxxxxxxxxx>
> > Cc: Mika Kahola <mika.kahola@xxxxxxxxx>
> > Cc: Jani Nikula <jani.nikula@xxxxxxxxx>
> > Cc: Manasi Navare <manasi.d.navare@xxxxxxxxx>
> > Signed-off-by: Jouni Högander <jouni.hogander@xxxxxxxxx>
> > ---
> >  .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 35
> > +++----------------
> >  1 file changed, 4 insertions(+), 31 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> > b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> > index 3e83fed540e8..eb7abdeb8653 100644
> > --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> > +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> > @@ -2903,15 +2903,12 @@ static struct drm_mode_config_helper_funcs
> > amdgpu_dm_mode_config_helperfuncs = {
> >
> >  static void update_connector_ext_caps(struct amdgpu_dm_connector
> > *aconnector)  {
> > -	u32 max_avg, min_cll, max, min, q, r;
> >  	struct amdgpu_dm_backlight_caps *caps;
> >  	struct amdgpu_display_manager *dm;
> >  	struct drm_connector *conn_base;
> >  	struct amdgpu_device *adev;
> >  	struct dc_link *link = NULL;
> > -	static const u8 pre_computed_values[] = {
> > -		50, 51, 52, 53, 55, 56, 57, 58, 59, 61, 62, 63, 65, 66, 68, 69,
> > -		71, 72, 74, 75, 77, 79, 81, 82, 84, 86, 88, 90, 92, 94, 96, 98};
> > +	struct drm_luminance_range_info *luminance_range;
> >  	int i;
> >
> >  	if (!aconnector || !aconnector->dc_link) @@ -2933,8 +2930,6 @@
> > static void update_connector_ext_caps(struct amdgpu_dm_connector
> *aconnector)
> >  	caps = &dm->backlight_caps[i];
> >  	caps->ext_caps = &aconnector->dc_link->dpcd_sink_ext_caps;
> >  	caps->aux_support = false;
> > -	max_avg = conn_base->hdr_sink_metadata.hdmi_type1.max_fall;
> > -	min_cll = conn_base->hdr_sink_metadata.hdmi_type1.min_cll;
> >
> >  	if (caps->ext_caps->bits.oled == 1 /*||
> >  	    caps->ext_caps->bits.sdr_aux_backlight_control == 1 || @@
> > -2946,31 +2941,9 @@ static void update_connector_ext_caps(struct
> amdgpu_dm_connector *aconnector)
> >  	else if (amdgpu_backlight == 1)
> >  		caps->aux_support = true;
> >
> > -	/* From the specification (CTA-861-G), for calculating the maximum
> > -	 * luminance we need to use:
> > -	 *	Luminance = 50*2**(CV/32)
> > -	 * Where CV is a one-byte value.
> > -	 * For calculating this expression we may need float point precision;
> > -	 * to avoid this complexity level, we take advantage that CV is divided
> > -	 * by a constant. From the Euclids division algorithm, we know that
> CV
> > -	 * can be written as: CV = 32*q + r. Next, we replace CV in the
> > -	 * Luminance expression and get 50*(2**q)*(2**(r/32)), hence we
> just
> > -	 * need to pre-compute the value of r/32. For pre-computing the
> values
> > -	 * We just used the following Ruby line:
> > -	 *	(0...32).each {|cv| puts (50*2**(cv/32.0)).round}
> > -	 * The results of the above expressions can be verified at
> > -	 * pre_computed_values.
> > -	 */
> > -	q = max_avg >> 5;
> > -	r = max_avg % 32;
> > -	max = (1 << q) * pre_computed_values[r];
> > -
> > -	// min luminance: maxLum * (CV/255)^2 / 100
> > -	q = DIV_ROUND_CLOSEST(min_cll, 255);
> > -	min = max * DIV_ROUND_CLOSEST((q * q), 100);
> > -
> > -	caps->aux_max_input_signal = max;
> > -	caps->aux_min_input_signal = min;
> > +	luminance_range = &conn_base->display_info.luminance_range;
> > +	caps->aux_min_input_signal = luminance_range->min_luminance;
> > +	caps->aux_max_input_signal = luminance_range->max_luminance;
> >  }
> >
> >  void amdgpu_dm_update_connector_after_detect(
> 
> --
> Jani Nikula, Intel Open Source Graphics Center




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux