From: Rodrigo Siqueira <Rodrigo.Siqueira@xxxxxxx>
In order to handle FPO correctly, we need to reinstate the dram values.
This function adds the required code to handle the vblank stretch and
the dram calculation.
Acked-by: Alex Hung <alex.hung@xxxxxxx>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@xxxxxxx>
---
.../drm/amd/display/dc/dcn30/dcn30_resource.h | 3 +
.../drm/amd/display/dc/dml/dcn32/dcn32_fpu.c | 67 ++++++++++++++++---
2 files changed, 60 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_resource.h b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_resource.h
index 3330a1026fa5..7d063c7d6a4b 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_resource.h
+++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_resource.h
@@ -99,6 +99,9 @@ enum dc_status dcn30_add_stream_to_ctx(
void dcn30_update_bw_bounding_box(struct dc *dc, struct clk_bw_params *bw_params);
+bool dcn30_can_support_mclk_switch_using_fw_based_vblank_stretch(struct dc *dc, struct dc_state *context);
void dcn30_setup_mclk_switch_using_fw_based_vblank_stretch(struct dc *dc, struct dc_state *context);
+int dcn30_find_dummy_latency_index_for_fw_based_mclk_switch(struct dc *dc, struct dc_state *context,
+ display_e2e_pipe_params_st *pipes, int pipe_cnt, int vlevel);
#endif /* _DCN30_RESOURCE_H_ */
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
index 9175fe1f9be3..01e272f0bb05 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
@@ -30,6 +30,7 @@
#include "display_mode_vba_util_32.h"
// We need this includes for WATERMARKS_* defines
#include "clk_mgr/dcn32/dcn32_smu13_driver_if.h"
+#include "dcn30/dcn30_resource.h"
#define DC_LOGGER_INIT(logger)
@@ -1597,6 +1598,10 @@ void dcn32_calculate_wm_and_dlg_fpu(struct dc *dc, struct dc_state *context,
double dcfclk_from_validation = context->bw_ctx.dml.vba.DCFCLKState[vlevel][context->bw_ctx.dml.vba.maxMpcComb];
bool pstate_en = context->bw_ctx.dml.vba.DRAMClockChangeSupport[vlevel][context->bw_ctx.dml.vba.maxMpcComb] !=
dm_dram_clock_change_unsupported;
+ unsigned int dummy_latency_index = 0;
+ int maxMpcComb = context->bw_ctx.dml.vba.maxMpcComb;
+ unsigned int min_dram_speed_mts = context->bw_ctx.dml.vba.DRAMSpeed;
+ unsigned int min_dram_speed_mts_margin;
dc_assert_fp_enabled();
@@ -1606,6 +1611,32 @@ void dcn32_calculate_wm_and_dlg_fpu(struct dc *dc, struct dc_state *context,
pstate_en = true;
}
+ context->bw_ctx.bw.dcn.clk.fw_based_mclk_switching = false;
+
+ if (!pstate_en) {
+ /* only when the mclk switch can not be natural, is the fw based vblank stretch attempted */
+ context->bw_ctx.bw.dcn.clk.fw_based_mclk_switching =
+ dcn30_can_support_mclk_switch_using_fw_based_vblank_stretch(dc, context);
+
+ if (context->bw_ctx.bw.dcn.clk.fw_based_mclk_switching) {
+ dummy_latency_index = dcn30_find_dummy_latency_index_for_fw_based_mclk_switch(dc,
+ context, pipes, pipe_cnt, vlevel);
+
+ /* After calling dcn30_find_dummy_latency_index_for_fw_based_mclk_switch
+ * we reinstate the original dram_clock_change_latency_us on the context
+ * and all variables that may have changed up to this point, except the
+ * newly found dummy_latency_index
+ */
+ context->bw_ctx.dml.soc.dram_clock_change_latency_us =
+ dc->clk_mgr->bw_params->wm_table.nv_entries[WM_A].dml_input.pstate_latency_us;
+ dcn32_internal_validate_bw(dc, context, pipes, &pipe_cnt, &vlevel, false);
+ maxMpcComb = context->bw_ctx.dml.vba.maxMpcComb;
+ dcfclk = context->bw_ctx.dml.vba.DCFCLKState[vlevel][context->bw_ctx.dml.vba.maxMpcComb];
+ pstate_en = context->bw_ctx.dml.vba.DRAMClockChangeSupport[vlevel][maxMpcComb] !=
+ dm_dram_clock_change_unsupported;
+ }
+ }
+
/* Set B:
* For Set B calculations use clocks from clock_limits[2] when available i.e. when SMU is present,
* otherwise use arbitrary low value from spreadsheet for DCFCLK as lower is safer for watermark
@@ -1687,19 +1718,33 @@ void dcn32_calculate_wm_and_dlg_fpu(struct dc *dc, struct dc_state *context,
pipes[0].clks_cfg.socclk_mhz = context->bw_ctx.dml.soc.clock_limits[vlevel].socclk_mhz;
if (dc->clk_mgr->bw_params->wm_table.nv_entries[WM_C].valid) {
- unsigned int min_dram_speed_mts = context->bw_ctx.dml.vba.DRAMSpeed;
- unsigned int min_dram_speed_mts_margin = 160;
+ min_dram_speed_mts = context->bw_ctx.dml.vba.DRAMSpeed;
+ min_dram_speed_mts_margin = 160;
- if (context->bw_ctx.dml.vba.DRAMClockChangeSupport[vlevel][context->bw_ctx.dml.vba.maxMpcComb] ==
- dm_dram_clock_change_unsupported)
- min_dram_speed_mts = dc->clk_mgr->bw_params->clk_table.entries[dc->clk_mgr->bw_params->clk_table.num_entries - 1].memclk_mhz * 16;
+ context->bw_ctx.dml.soc.dram_clock_change_latency_us =
+ dc->clk_mgr->bw_params->dummy_pstate_table[0].dummy_pstate_latency_us;
- /* find largest table entry that is lower than dram speed, but lower than DPM0 still uses DPM0 */
- for (i = 3; i > 0; i--)
- if (min_dram_speed_mts + min_dram_speed_mts_margin > dc->clk_mgr->bw_params->dummy_pstate_table[i].dram_speed_mts)
- break;
+ if (context->bw_ctx.dml.vba.DRAMClockChangeSupport[vlevel][maxMpcComb] ==
+ dm_dram_clock_change_unsupported) {
+ int min_dram_speed_mts_offset = dc->clk_mgr->bw_params->clk_table.num_entries - 1;
+
+ min_dram_speed_mts =
+ dc->clk_mgr->bw_params->clk_table.entries[min_dram_speed_mts_offset].memclk_mhz * 16;
+ }
+
+ if (!context->bw_ctx.bw.dcn.clk.fw_based_mclk_switching) {
+ /* find largest table entry that is lower than dram speed,
+ * but lower than DPM0 still uses DPM0
+ */
+ for (dummy_latency_index = 3; dummy_latency_index > 0; dummy_latency_index--)
+ if (min_dram_speed_mts + min_dram_speed_mts_margin >
+ dc->clk_mgr->bw_params->dummy_pstate_table[dummy_latency_index].dram_speed_mts)
+ break;
+ }
+
+ context->bw_ctx.dml.soc.dram_clock_change_latency_us =
+ dc->clk_mgr->bw_params->dummy_pstate_table[dummy_latency_index].dummy_pstate_latency_us;
- context->bw_ctx.dml.soc.dram_clock_change_latency_us = dc->clk_mgr->bw_params->dummy_pstate_table[i].dummy_pstate_latency_us;
context->bw_ctx.dml.soc.fclk_change_latency_us = dc->clk_mgr->bw_params->wm_table.nv_entries[WM_C].dml_input.fclk_change_latency_us;
context->bw_ctx.dml.soc.sr_enter_plus_exit_time_us = dc->clk_mgr->bw_params->wm_table.nv_entries[WM_C].dml_input.sr_enter_plus_exit_time_us;
context->bw_ctx.dml.soc.sr_exit_time_us = dc->clk_mgr->bw_params->wm_table.nv_entries[WM_C].dml_input.sr_exit_time_us;
@@ -1770,6 +1815,8 @@ void dcn32_calculate_wm_and_dlg_fpu(struct dc *dc, struct dc_state *context,
context->bw_ctx.dml.soc.dram_clock_change_latency_us =
dc->clk_mgr->bw_params->wm_table.nv_entries[WM_A].dml_input.pstate_latency_us;
+ if (context->bw_ctx.bw.dcn.clk.fw_based_mclk_switching)
+ dcn30_setup_mclk_switch_using_fw_based_vblank_stretch(dc, context);
}
static void dcn32_get_optimal_dcfclk_fclk_for_uclk(unsigned int uclk_mts,
--
2.37.1
