[PATCH v4 00/41] DYNDBG: opt-in class'd debug for modules, use in drm.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Oof, v3 had 2 copies renumbered and intermingled. Resending w/o the crud.
v4 missed dri-devel & patchwork, sending there now. with doc tweak per Bagas.

Its also at https://github.com/jimc/linux.git, in the dyn-drm-trc branch.


Hi Jason, Greg, DRM-folk,

This adds 'typed' "class FOO" support to dynamic-debug, where 'typed'
means either DISJOINT (like drm debug categories), or VERBOSE (like
nouveau debug-levels).  Use it in DRM modules: core, helpers, and in
drivers i915, amdgpu, nouveau.

If a module is using class'd prdbgs (pr_debug_class, dev_dbg_class, or
adapted drm_dbg_<category>) or similar in its code, it can "opt in" to
allow dyndbg to manipulate those class'd prdebugs, by declaring in a
c-file:

 DECLARE_DYNDBG_CLASSMAP(drm_debug_classes,
  			DD_CLASS_TYPE_DISJOINT, 0,
                        "DRM_UT_CORE",
                        "DRM_UT_DRIVER",
                        "DRM_UT_KMS",
                        "DRM_UT_PRIME",
                        "DRM_UT_ATOMIC",
                        "DRM_UT_VBL",
                        "DRM_UT_STATE",
                        "DRM_UT_LEASE",
                        "DRM_UT_DP",
                        "DRM_UT_DRMRES");
			// how-to stringify __va_args inside the macro ?

By doing this, a module tells dyndbg that it:

   - is using class-ids [0..N] in prdbg callsites
     0..N are the numeric values of DRM_UT_CORE..DRM_UT_DRMRES
   - wants to refer to them by class-names [0..N]
   - is mapping those names to those class-ids
   - expects users to enable them via >control or >parameter/knob

Then, a user can enable the prdbgs by their class:

   :#> echo class DRM_UT_KMS +p > /proc/dynamic_debug/control

And with another 3-line bitmap param decl/init, wrapping the
drm_debug_classes var in a module-param-cb:

   :#> echo 0x1 > /sys/module/drm/parameters/debug

and optionally:

   :#> echo +DRM_UT_CORE,-DRM_UT_KMS \
	> /sys/module/drm/parameters/debug_cats

DYNAMIC_DEBUG gets:

new .class_id:5 field in struct _ddebug (callsite record) big enough
to represent drm_debug_category (after squeezing) defaults to 31 for
all existing prdbgs.  class_id is also used to, or any reasonable
number of verbose levels (30 is impractical, istm).

classmaps (as declared by macro above) are in their own linker
section, and are loaded by kernel/module, and handled by add_module,
which attaches classmaps to their module's ddebug table.
     
ddebug_change() handles a class FOO query by validating that FOO is
known by each module in the loop.  The query is skipped unless the
module knows FOO, so no changes are possible w/o a good classname.

Without class FOO in a query/command, only ids=31 can be changed by
that query.  This protects all class'd prdbgs from changes by old,
class-less user queries.

With this support, the module opt-in approach means that:

   - modules declare classnames they like, meaningful names, DRM_UT_*
     these are numbered [0..N]
   - modules call pr_debug_class(N, "fmt..",...)
     or drm_dbg(CAT, "fmt..",...) - same form.
   - class-id space, while limited:0-30, is private to each module
   - "class FOO" is only way to enable a class'd prdbg
   - unrelated modules use 0..N separately, for different purposes.
   - modules "share" classnames by separate decls (uses of macro)
     all drm modules reuse the above declaration.
     then they respond together to a >control

4 CLASS_TYPES are defined; they split behavior on 2 factors:

   1. independent bits vs related:(X<Y) bits [0-N]
   2. input form: number/hex vs CSV-list: [+-]CLASS_NAMES
     
   DD_CLASS_TYPE_DISJOINT	independent bits, 0x1f input is clearest
   DD_CLASS_TYPE_VERBOSE	(x<y), input is level, not bitvec
   DD_CLASS_TYPE_SYMBOLIC	DISJOINT with csv-list of +-CLASS_NAMEs
   DD_CLASS_TYPE_LEVELS		VERBOSE  with csv-list of +-CLASS_NAMEs

Splitting up behavior this way is safe, and flexible:

 - no bitmap-vs-level > sysknob ambiguity
   as was case when both were accepted on same knob
 - narrower interfaces
   uint is uint
 - can defer SYMBOLIC handling, but keep the enums.
   it has no users ...
 - can later add 2 more ENUMS allowing both inputs
   in separate VERBOSE & DISJOINT choices
   then authors choice if they want to accept mixed input
 - can enumerate "wierd" relations if needed
   DISJOINT|VERBOSE should cover everything I can forsee
   but theres room for DD_CLASS_TYPE_STOCHASTIC (over the garage)

NB: DISJOINT v RELATED cover the space; there is no semi-related.  The
relation could differ from (x<y), but atm I can't think of another
that makes any sensible distinction from VERBOSE.

Quick review of debug logging:

DRM is biggest use-case: 23 macros, issuing 10 exclusive categories of
messages, from ~5100 callsites, across core (drm, _*helpers), and 3+
drivers (Im working amdgpu, i915, more recently nouveau).  These mostly
flow to drm_debug_enabled(category) for a print/no decision.

nouveau has minimum direct use of the DRM.debug macros, but does use
pr_debug (in VMM iirc), and drm_debug_enabled() in ~50 places via
macros, and another ~50 iirc due to NOUVEAU_DEBUG_MMU=y

What nouveau has most of is log-levels: there are ~800 uses of them;
nvkm_(fatal|error|warn|info|debug|trace|spam), they all flow thru
nvkm_printk_.  Even excluding some levels as "always-on" and not
appropriate for dyndbg's extra resources and complexity, theres ~450
callsites.

A reported smattering of raw/adhoc debug code. all but unknown to me.

Like any debug logging, they're mostly off, and should have close to
0-off-cost.  This is what dyndbg (with/on jump-label) was made for.

Bottom line: in order to unify more potential (drm,etc) use-cases,
dyndbg needs to support both debug classification schemes:
RELATED/VERBOSE and INDEPENDENT/DISJOINT.

This is rev3. rev2 is here:
https://lore.kernel.org/lkml/20220516225640.3102269-1-jim.cromie@xxxxxxxxx/

summary of diffs:

 - rebased on 5.19-rc6 to pick up kernel/module changes
 - tracfs bits now use __vstring, __vstr_assign, from S.Rostedt
 
 - 4 class-map-types - as outlined above
   now supports VERBOSE semantics, WIP nouveau integration.
   v2 became the DISJOINT use case
   Lots of API-ish surface area here *RFC*

 - class-maps now in section("__dyndbg_classes")
   class FOO queries are available at earlyboot / module-load
   drop (un)?register_classes()

 - test-dynamic-debug module
   tests the 4 CLASS-TYPES
   good place to bikeshed / paintshop the API

 - nouveau - start poking - WIP
   NV_PRINT -> dev_dbg (creates 632 prdbgs, but not class'd)
   VERBOSE classes declared to see how they "fit", unused yet.

Summary:

 - plenty of new stuff here.
 - plenty of new API surface area.
 - exposes CLASSNAMES to user, via control, >symbolic-sysknob

More on VERBOSE:

dyndbg's class scheme is names-based, so even for VERBOSE with
numeric input, there must be a "V0" name; a name with which to turn
off "V1".  And don't do 'pr_dbg_class(0,..)'.

VERBOSE is an overlay on DISJOINT; the callback reads the input as a
level, and computes and applies the bitmap to enforce it.  Yes it
wastes "V0" bit.  That might matter if an author wanted many separate
verbose-knobs with a few levels each, but that seems fairly unlikely.

More importantly, it means that relative verbosity is not enforced at
the >control input; IOW this is allowed:

   :#> echo class V1 -p > /proc/dynamic_debug/control
   :#> echo class V3 +p > /proc/dynamic_debug/control

2nd line doesn't undo 1st, as it would if changed via sysfs-knob:

   :#> echo 3 > /sys/module/drm/parameters/debug

ISTM this is fine, the "relative" meaning is added at the interface,
where it presents to a user.  Doing otherwise means surgery to
ddebug_change, which seems unnecessary given an option.

CLASS NAMESPACE and DRM

The class namespace is flat and wide, so "V1" is a poor choice, other
than for demonstration (as in test_dynamic_debug module).  If every
module had a "V1", turning them all on would issue lots of unrelated
noise.

Instead, class DRM_UT_CORE has a name with a specific sub-system wide
(ie multi-module) meaning, and can (and should) be responded to by all
cooperating modules.

For DRM, this means 4-5 duplicate uses of DEFINE_DYNDBG_CLASSMAP, from
multiple drivers' "*_{drm,dev,main}.c" files; all of them agreeing on
the classnames, map-type and base.  Though repetitive, and a bit
fiddly when multiple classes share the module's id-space, it is
simple, and consistent with the "static struct foo = {INIT_expr}"
pattern used in the macro.  Im open to simpler ways, initializing an
extern sounded like a maze w/o cheese.

For core, drm_print.c has an additional task; it defines and
initializes the bitmap sysknob that converts bits to a query:

  static struct ddebug_classes_bitmap_param drm_debug_bitmap = {
       .bits = &__drm_debug,
       .flags = "p",
       .map = &drm_debug_classes,
  };
  module_param_cb(debug, &param_ops_dyndbg_classes,
  		  &drm_debug_bitmap, 0600);

then the callback converts bit-toggles on input into something like:

  :#> echo class DRM_UT_KMS +p > control

which enables all drm_dbg_kms() callsites in all modules that declared
that classname as known.

NB: classmaps and classes_bitmap_params are different structs.  this
allows the former to be shared by 2 of latter, each toggling 'p' & 'T'
flags, to control output to syslog or tracelog independently.

NBB: while "V1" isnt a good classname, "EMERG" and and other
KERN-LEVEL names have a legacy.  That said, dyndbg shouldnt be
involved in EMERG actions.

NOUVEAU and multiple VERBOSE knobs ?

One thing nouveau has that I havent yet grokked is 2|3 independent
verbose levels, in {,cli,sub}->debug (see subdev.h).  But Ive coded
them as 2 more macro invocations; using bases 10, 15 to avoid/respect
the 0-9 mapping of DRM.debug categories to those class-ids.

With this, the drm subsystem uses 20/31 of its class-id range, perhaps
63 is better, despite the cumbersome 0x-64bit interface.  Note that
the sysfs-knobs do not expose the base/offset (its an inward-facing
.class_id offset); each sysfs-knob gets its own 0..N bitmap, the base
maps it to the 0..30 subrange allocated (manually, via the base arg to
macro) for this class-map.

anyway, heres how `modprobe nouveau` goes with dynamic_debug.verbose=3

[86512.693954] dyndbg: class[0]: module:nouveau base:15 len:5 ty:1
[86512.693958] dyndbg:  15: 0 NV_SUBDEV_DBG_OFF		# aka V0
[86512.693959] dyndbg:  16: 1 NV_SUBDEV_DBG_INFO
[86512.693960] dyndbg:  17: 2 NV_SUBDEV_DBG_DEBUG
[86512.693960] dyndbg:  18: 3 NV_SUBDEV_DBG_TRACE
[86512.693960] dyndbg:  19: 4 NV_SUBDEV_DBG_SPAM
[86512.693961] dyndbg: class[1]: module:nouveau base:10 len:5 ty:1
[86512.693961] dyndbg:  10: 0 NV_CLI_DBG_OFF
[86512.693962] dyndbg:  11: 1 NV_CLI_DBG_INFO
[86512.693962] dyndbg:  12: 2 NV_CLI_DBG_DEBUG
[86512.693963] dyndbg:  13: 3 NV_CLI_DBG_TRACE
[86512.693963] dyndbg:  14: 4 NV_CLI_DBG_SPAM
[86512.693963] dyndbg: class[2]: module:nouveau base:0 len:10 ty:0
[86512.693964] dyndbg:  0: 0 DRM_UT_CORE
[86512.693964] dyndbg:  1: 1 DRM_UT_DRIVER
[86512.693965] dyndbg:  2: 2 DRM_UT_KMS
[86512.693965] dyndbg:  3: 3 DRM_UT_PRIME
[86512.693965] dyndbg:  4: 4 DRM_UT_ATOMIC
[86512.693966] dyndbg:  5: 5 DRM_UT_VBL
[86512.693966] dyndbg:  6: 6 DRM_UT_STATE
[86512.693966] dyndbg:  7: 7 DRM_UT_LEASE
[86512.693967] dyndbg:  8: 8 DRM_UT_DP
[86512.693967] dyndbg:  9: 9 DRM_UT_DRMRES
[86512.693968] dyndbg: module:nouveau attached 3 classes
[86512.693968] dyndbg: 632 debug prints in module nouveau

They are not yet wired by class; the nv-printks are using dev_dbg for
now, so they can be enabled with standard selections (module, func,
etc).

DYNDBG API

I added __pr_debug_cls to make things testable, I wanted to keep it
private/un-api, because drm already has drm_dbg_<cat>(cat, fmt..), and
that seemed a pretty good model to follow: enums with strong names for
class_id constants, and same names for classes.

   ie: __pr_debug_cls(DRM_UT_KMS, "Whats the Matter with KMS: %s\n", reason);

But now nouveau probably wants/needs it, perhaps others too.

  pr_dbg_cls / dev_dbg_cls ?  class or debug spelled out ? 

MORE TESTING with DRM & TRACEFS

Most dev & testing has been on virtme, with test-dynamic-debug module
doing an api-validation-demonstration.  The test module proves
multiple sysknobs, but cannot prove real multi-module sharing of the
class-name space.  The DRM.debug adaptation must (and does) do that.

Now Im running on real gpu/drm hw; on both an amdgpu desktop, and this
amdgpu+nouveau laptop.  Its stable enough to type on, browse, build
more kernels, etc.

:#> uname -r
5.18.0-f2-00038-g61d300083196
:#> wc /proc/dynamic_debug/control 
11554 95556 1442827 /proc/dynamic_debug/control
:#> lsmod | grep drm
drm_buddy              20480  1 i915
drm_ttm_helper         16384  2 amdgpu,nouveau
ttm                    86016  4 amdgpu,drm_ttm_helper,i915,nouveau
drm_dp_helper         184320  3 amdgpu,i915,nouveau
drm_kms_helper        208896  6 drm_dp_helper,amdgpu,i915,nouveau
drm                   655360  16 gpu_sched,drm_dp_helper,drm_kms_helper,drm_buddy,amdgpu,drm_ttm_helper,i915,ttm,nouveau
cec                    49152  2 drm_dp_helper,i915

I've never turned on DRM.debug in frustration (or curiousity until
recently); I dunno what normal traffic looks like.  So I wrote a
script to toggle each category: on/off for 1 sec, so I could 'more'
thru the output to see the partitioned streams.

Different runs (of '10' sec of active tracing) produce between 330-3500
lines of logging, depending upon mousing/screen activity.  Heres a bit
of a many-window-select run: `wc trace` gives "size" of the category's stream.

:#> trc_classes 
12 /sys/kernel/tracing/trace
doing class DRM_UT_CORE +/- T   1394 13941 141614 /sys/kernel/tracing/trace
doing class DRM_UT_DRIVER +/- T   1396 13959 141816 /sys/kernel/tracing/trace
doing class DRM_UT_KMS +/- T   1482 14521 148246 /sys/kernel/tracing/trace
doing class DRM_UT_PRIME +/- T   1484 14539 148446 /sys/kernel/tracing/trace
doing class DRM_UT_ATOMIC +/- T   2984 31658 396064 /sys/kernel/tracing/trace
doing class DRM_UT_VBL +/- T   3411 37321 449848 /sys/kernel/tracing/trace
doing class DRM_UT_STATE +/- T   3413 37339 450048 /sys/kernel/tracing/trace
doing class DRM_UT_LEASE +/- T   3415 37357 450248 /sys/kernel/tracing/trace
doing class DRM_UT_DP +/- T   3417 37375 450442 /sys/kernel/tracing/trace
doing class DRM_UT_DRMRES +/- T   3419 37393 450644 /sys/kernel/tracing/trace

and some mid-run output from a quiet run, with less repetition.

            bash-96790   [006] ..... 410237.432255: tracing_mark_write: doing class DRM_UT_DRIVER +T
            bash-96790   [006] ..... 410238.610319: tracing_mark_write: doing class DRM_UT_DRIVER -T
            bash-96790   [006] ..... 410239.776285: tracing_mark_write: doing class DRM_UT_KMS +T
     gnome-shell-2101    [003] ..... 410239.923029: drm_debug: [FB:98]
  kworker/u32:10-367584  [010] ..... 410239.924627: drm_debug: Allow idle optimizations (MALL): 0
   kworker/u32:0-364714  [008] ..... 410239.935126: drm_debug: Allow idle optimizations (MALL): 1
     gnome-shell-2101    [003] ..... 410240.527186: drm_debug: [FB:100]
   kworker/u32:0-364714  [008] ..... 410240.528686: drm_debug: Allow idle optimizations (MALL): 0
  kworker/u32:10-367584  [010] ..... 410240.539378: drm_debug: Allow idle optimizations (MALL): 1
            bash-96790   [006] ..... 410240.957921: tracing_mark_write: doing class DRM_UT_KMS -T
            bash-96790   [006] ..... 410242.199120: tracing_mark_write: doing class DRM_UT_PRIME +T
            bash-96790   [006] ..... 410243.301988: tracing_mark_write: doing class DRM_UT_PRIME -T
            bash-96790   [006] ..... 410244.416400: tracing_mark_write: doing class DRM_UT_ATOMIC +T
     gnome-shell-2101    [003] ..... 410244.653372: drm_devdbg: cat:4, (0xffff8f26c173de00:0000:06:00.0)[UNSAFE-MEMORY] Allocated atomic state 000000001f1e6cb6
     gnome-shell-2101    [003] ..... 410244.653381: drm_devdbg: cat:4, (0xffff8f26c173de00:0000:06:00.0)[UNSAFE-MEMORY] Added [PLANE:55:plane-3] 00000000785ae904 state to 000000001f1e6cb6
     gnome-shell-2101    [003] ..... 410244.653384: drm_devdbg: cat:4, (0xffff8f26c173de00:0000:06:00.0)[UNSAFE-MEMORY] Added [CRTC:67:crtc-0] 00000000b06ca618 state to 000000001f1e6cb6
     gnome-shell-2101    [003] ..... 410244.653389: drm_devdbg: cat:4, (0xffff8f26c173de00:0000:06:00.0)[UNSAFE-MEMORY] Set [FB:98] for [PLANE:55:plane-3] state 00000000785ae904
     gnome-shell-2101    [003] ..... 410244.653392: drm_devdbg: cat:4, (0xffff8f26c173de00:0000:06:00.0)[UNSAFE-MEMORY] checking 000000001f1e6cb6
     gnome-shell-2101    [003] ..... 410244.653407: drm_devdbg: cat:4, (0xffff8f26c173de00:0000:06:00.0)[UNSAFE-MEMORY] committing 000000001f1e6cb6 nonblocking
   kworker/u32:0-364714  [010] ..... 410244.653729: drm_debug: amdgpu_crtc id:0 crtc_state_flags: enable:1, active:1, planes_changed:1, mode_changed:0,active_changed:0,connectors_changed:0
   kworker/u32:0-364714  [010] ..... 410244.654642: drm_debug: plane: id=3 dcc_en=0

a few things to note in the trace output:

. the event-name: drm_(debug|devdbg) is not very informative

. drm_devdbg fmt has cat:%d, it could be the classname, but that should
  replace event-name, not supplement it. this pertains to drm_debug too.

. drm_devdbg has lots of (dev-info), that could be optional on a new flag(s)


If anyone wants to repeat the above with the patchset, the .rc file follows:

events_3() {
    local a=$1
    local b=$2
    local c=$3
    echo $a > /sys/kernel/tracing/events/dyndbg/enable
    # avoid drm_vblank*, its noisy
    echo $b > /sys/kernel/tracing/events/drm/drm_debug/enable
    echo $c > /sys/kernel/tracing/events/drm/drm_devdbg/enable
}

flags_class() {
    local flgs=$1;
    local cls=$2;
    echo class $cls $flgs > /proc/dynamic_debug/control
}

# turn on each DRM_UT_* for 1 second each.
# kinda shows relative traffic of each category
# separated into blocks to get flavor of each

drm_classes() {
    local flgs=$1
    [ -z $flgs ] && flgs="p"

    #echo > /sys/kernel/tracing/trace
    #wc /sys/kernel/tracing/trace

    for cls in DRM_UT_CORE DRM_UT_DRIVER DRM_UT_KMS DRM_UT_PRIME DRM_UT_ATOMIC \
			   DRM_UT_VBL DRM_UT_STATE DRM_UT_LEASE DRM_UT_DP \
			   DRM_UT_DRMRES;
    do
	echo -n doing class $cls "  "

	echo doing class $cls +$flgs
	sleep .1
	flags_class +$flgs $cls
	sleep 1
	
	echo doing class $cls -$flgs
	sleep .1
	flags_class -$flgs $cls
	sleep 1
	
	#wc /sys/kernel/tracing/trace
    done
}

# like above but with T flag, and markers, trace/enable
trc_classes() {
    local flgs=$1
    [ -z $flgs ] && flgs="T"

    echo > /sys/kernel/tracing/trace
    wc -l /sys/kernel/tracing/trace

    events_3 1 1 1
    for cls in DRM_UT_CORE DRM_UT_DRIVER DRM_UT_KMS DRM_UT_PRIME \
			   DRM_UT_ATOMIC \
			   DRM_UT_VBL DRM_UT_STATE DRM_UT_LEASE DRM_UT_DP \
			   DRM_UT_DRMRES;
    do
	echo -n doing class $cls +/- $flgs "  "

	echo doing class $cls +$flgs > /sys/kernel/tracing/trace_marker
	sleep .1
	flags_class +$flgs $cls
	sleep 1
	
	echo doing class $cls -$flgs > /sys/kernel/tracing/trace_marker
	sleep .1
	flags_class -$flgs $cls
	sleep 1
	
	wc /sys/kernel/tracing/trace

    done
    events_3 0 0 0
}

I ignored a few checkpatch warns, preferring source's spacing conventions.


Jim Cromie (40):






Jim Cromie (40):

1st, a group of "cleanups"
  dyndbg: fix static_branch manipulation
  dyndbg: fix module.dyndbg handling
  dyndbg: show both old and new in change-info
  dyndbg: reverse module walk in cat control
  dyndbg: reverse module.callsite walk in cat control
  dyndbg: use ESCAPE_SPACE for cat control
  dyndbg: let query-modname override actual module name
  dyndbg: add test_dynamic_debug module
  dyndbg: drop EXPORTed dynamic_debug_exec_queries

class FOO support  
  dyndbg: add class_id to pr_debug callsites
  dyndbg: add __pr_debug_cls for testing
  dyndbg: add DECLARE_DYNDBG_CLASSMAP
  kernel/module: add __dyndbg_classes section
  dyndbg: add ddebug_attach_module_classes
  dyndbg: validate class FOO by checking with module
  dyndbg: add drm.debug style bitmap support
  dyndbg: test DECLARE_DYNDBG_CLASSMAP, sysfs nodes
  doc-dyndbg: describe "class CLASS_NAME" query support
  doc-dyndbg: edit dynamic-debug-howto for brevity, audience

drm.debug adaptation
  drm_print: condense enum drm_debug_category
  drm: POC drm on dyndbg - use in core, 2 helpers, 3 drivers.
  drm_print: interpose drm_*dbg with forwarding macros
  drm_print: wrap drm_*_dbg in dyndbg descriptor factory macro
  drm-print: add drm_dbg_driver to improve namespace symmetry
  drm-print: include dyndbg header indirectly
  drm_print: refine drm_debug_enabled for jump-label
  drm_print: prefer bare printk KERN_DEBUG on generic fn
  drm_print: add _ddebug descriptor to drm_*dbg prototypes
  nouveau: change nvkm_debug/trace to use dev_dbg POC

Steven Rostedt (Google) (1):
  tracing/events: Add __vstring() and __assign_vstr() helper macros

new tracefs events:
  dyndbg: add _DPRINTK_FLAGS_ENABLED
  dyndbg: add _DPRINTK_FLAGS_TRACE
  dyndbg: add write-events-to-tracefs code
  dyndbg: add 2 trace-events: drm_{,dev}debug
  dyndbg: add 2 more trace-events: pr_debug, dev_dbg
  dyndbg/drm: POC add tracebits sysfs-knob  

nouveau-VERBOSE integration: WIP/exploratory.
  nouveau: adapt NV_DEBUG, NV_ATOMIC to use DRM.debug
  nouveau-dyndbg: alter DEBUG, TRACE, SPAM levels to use dyndbg
  nouveau-dbg: add 2 verbose-classmaps for CLI, SUBDEV
  nouveau-dbg: fixup lost prdbgs
  nouveau-dyndbg: wip subdev refine, breaks on use


 .../admin-guide/dynamic-debug-howto.rst       | 252 ++++----
 MAINTAINERS                                   |   2 +
 drivers/gpu/drm/Kconfig                       |  12 +
 drivers/gpu/drm/Makefile                      |   2 +
 drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c       |  14 +
 drivers/gpu/drm/display/drm_dp_helper.c       |  13 +
 drivers/gpu/drm/drm_crtc_helper.c             |  13 +
 drivers/gpu/drm/drm_print.c                   |  83 ++-
 drivers/gpu/drm/i915/i915_params.c            |  12 +
 .../gpu/drm/nouveau/include/nvkm/core/debug.h |  16 +
 .../drm/nouveau/include/nvkm/core/subdev.h    |  17 +-
 drivers/gpu/drm/nouveau/nouveau_drm.c         |  20 +
 drivers/gpu/drm/nouveau/nouveau_drv.h         |  16 +-
 drivers/gpu/drm/nouveau/nvkm/core/subdev.c    |  23 +
 include/asm-generic/vmlinux.lds.h             |   3 +
 include/drm/drm_print.h                       |  85 ++-
 include/linux/dynamic_debug.h                 | 179 +++++-
 include/linux/trace_events.h                  |  18 +
 include/trace/events/drm.h                    |  54 ++
 include/trace/events/dyndbg.h                 |  74 +++
 include/trace/stages/stage1_struct_define.h   |   3 +
 include/trace/stages/stage2_data_offsets.h    |   3 +
 include/trace/stages/stage4_event_fields.h    |   3 +
 include/trace/stages/stage5_get_offsets.h     |   4 +
 include/trace/stages/stage6_event_callback.h  |   7 +
 kernel/module/internal.h                      |   2 +
 kernel/module/main.c                          |  10 +-
 lib/Kconfig.debug                             |  10 +
 lib/Makefile                                  |   1 +
 lib/dynamic_debug.c                           | 540 +++++++++++++++---
 lib/test_dynamic_debug.c                      | 165 ++++++
 31 files changed, 1374 insertions(+), 282 deletions(-)
 create mode 100644 include/trace/events/drm.h
 create mode 100644 include/trace/events/dyndbg.h
 create mode 100644 lib/test_dynamic_debug.c

-- 
2.36.1




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux