From: Evan Quan <evan.quan@xxxxxxx>
Firsrt of all, the operations involved is to interact with
VBIOS. They are fully supported at ->sw_init phase.
Secondly, the new mechanism to upload pptable to SMU is
introduced. With the new mechanism, the pptable transferring
has to be via PSP. That requires the pptable ucode(and necessary
bootupp values retrieving) must be ready before ->hw_init phase of PSP.
Signed-off-by: Evan Quan <evan.quan@xxxxxxx>
Reviewed-by: Hawking Zhang <Hawking.Zhang@xxxxxxx>
Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx>
---
drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
index 904d516c040b..07f44970bf63 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
@@ -1020,6 +1020,13 @@ static int smu_sw_init(void *handle)
return ret;
}
+ /* get boot_values from vbios to set revision, gfxclk, and etc. */
+ ret = smu_get_vbios_bootup_values(smu);
+ if (ret) {
+ dev_err(adev->dev, "Failed to get VBIOS boot clock values!\n");
+ return ret;
+ }
+
ret = smu_register_irq_handler(smu);
if (ret) {
dev_err(adev->dev, "Failed to register smc irq handler!\n");
@@ -1304,13 +1311,6 @@ static int smu_hw_init(void *handle)
if (!smu->pm_enabled)
return 0;
- /* get boot_values from vbios to set revision, gfxclk, and etc. */
- ret = smu_get_vbios_bootup_values(smu);
- if (ret) {
- dev_err(adev->dev, "Failed to get VBIOS boot clock values!\n");
- return ret;
- }
-
ret = smu_setup_pptable(smu);
if (ret) {
dev_err(adev->dev, "Failed to setup pptable!\n");
--
2.35.1
