From: Roman Li <Roman.Li@xxxxxxx> [Why] In init_hw() we call init_pipes() before enabling power gating. init_pipes() tries to power gate dsc but it may fail because required force-ons are not released yet. As a result with dsc config the following errors observed on resume: "REG_WAIT timeout 1us * 1000 tries - dcn20_dsc_pg_control" "REG_WAIT timeout 1us * 1000 tries - dcn20_dpp_pg_control" "REG_WAIT timeout 1us * 1000 tries - dcn20_hubp_pg_control" [How] Move enable_power_gating_plane() before init_pipes() in init_hw() Reviewed-by: Anthony Koo <Anthony.Koo@xxxxxxx> Reviewed-by: Eric Yang <Eric.Yang2@xxxxxxx> Acked-by: Alex Hung <alex.hung@xxxxxxx> Signed-off-by: Roman Li <Roman.Li@xxxxxxx> --- drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c | 5 +++-- drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c | 5 +++-- drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c | 5 +++-- 3 files changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c index bb309ccee3e4..e4247740ac12 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c @@ -1504,6 +1504,9 @@ void dcn10_init_hw(struct dc *dc) /* we want to turn off all dp displays before doing detection */ dc_link_blank_all_dp_displays(dc); + if (hws->funcs.enable_power_gating_plane) + hws->funcs.enable_power_gating_plane(dc->hwseq, true); + /* If taking control over from VBIOS, we may want to optimize our first * mode set, so we need to skip powering down pipes until we know which * pipes we want to use. @@ -1556,8 +1559,6 @@ void dcn10_init_hw(struct dc *dc) REG_UPDATE(DCFCLK_CNTL, DCFCLK_GATE_DIS, 0); } - if (hws->funcs.enable_power_gating_plane) - hws->funcs.enable_power_gating_plane(dc->hwseq, true); if (dc->clk_mgr->funcs->notify_wm_ranges) dc->clk_mgr->funcs->notify_wm_ranges(dc->clk_mgr); diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c index ed0a0e5fd805..f61ec8763844 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c @@ -547,6 +547,9 @@ void dcn30_init_hw(struct dc *dc) /* we want to turn off all dp displays before doing detection */ dc_link_blank_all_dp_displays(dc); + if (hws->funcs.enable_power_gating_plane) + hws->funcs.enable_power_gating_plane(dc->hwseq, true); + /* If taking control over from VBIOS, we may want to optimize our first * mode set, so we need to skip powering down pipes until we know which * pipes we want to use. @@ -624,8 +627,6 @@ void dcn30_init_hw(struct dc *dc) REG_UPDATE(DCFCLK_CNTL, DCFCLK_GATE_DIS, 0); } - if (hws->funcs.enable_power_gating_plane) - hws->funcs.enable_power_gating_plane(dc->hwseq, true); if (!dcb->funcs->is_accelerated_mode(dcb) && dc->res_pool->hubbub->funcs->init_watermarks) dc->res_pool->hubbub->funcs->init_watermarks(dc->res_pool->hubbub); diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c index b57f657c4e44..67c13654ab99 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c @@ -203,6 +203,9 @@ void dcn31_init_hw(struct dc *dc) /* we want to turn off all dp displays before doing detection */ dc_link_blank_all_dp_displays(dc); + if (hws->funcs.enable_power_gating_plane) + hws->funcs.enable_power_gating_plane(dc->hwseq, true); + /* If taking control over from VBIOS, we may want to optimize our first * mode set, so we need to skip powering down pipes until we know which * pipes we want to use. @@ -252,8 +255,6 @@ void dcn31_init_hw(struct dc *dc) REG_UPDATE(DCFCLK_CNTL, DCFCLK_GATE_DIS, 0); } - if (hws->funcs.enable_power_gating_plane) - hws->funcs.enable_power_gating_plane(dc->hwseq, true); if (!dcb->funcs->is_accelerated_mode(dcb) && dc->res_pool->hubbub->funcs->init_watermarks) dc->res_pool->hubbub->funcs->init_watermarks(dc->res_pool->hubbub); -- 2.35.1
