From: Charlene Liu <Charlene.Liu@xxxxxxx>
[why]
DCN31 has this in zstate save/restore sequence.
need for non_zstate supported ASIC
[how]
add this PANEL_PWRSEQ_REF_DIV2 to existing panel_cntl_hw_init structure.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@xxxxxxx>
Acked-by: Agustin Gutierrez <agustin.gutierrez@xxxxxxx>
Signed-off-by: Charlene Liu <Charlene.Liu@xxxxxxx>
---
.../amd/display/dc/dcn31/dcn31_panel_cntl.c | 5 +-
.../drm/amd/display/dc/inc/hw/panel_cntl.h | 1 +
.../gpu/drm/amd/display/dmub/inc/dmub_cmd.h | 88 ++++++++++++++++++-
3 files changed, 91 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_panel_cntl.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_panel_cntl.c
index 83ece02380a8..11ea9d13e312 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_panel_cntl.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_panel_cntl.c
@@ -83,7 +83,8 @@ static uint32_t dcn31_panel_cntl_hw_init(struct panel_cntl *panel_cntl)
cmd.panel_cntl.data.bl_pwm_period_cntl = panel_cntl->stored_backlight_registers.BL_PWM_PERIOD_CNTL;
cmd.panel_cntl.data.bl_pwm_ref_div1 =
panel_cntl->stored_backlight_registers.LVTMA_PWRSEQ_REF_DIV_BL_PWM_REF_DIV;
-
+ cmd.panel_cntl.data.bl_pwm_ref_div2 =
+ panel_cntl->stored_backlight_registers.PANEL_PWRSEQ_REF_DIV2;
if (!dc_dmub_srv_cmd_with_reply_data(dc_dmub_srv, &cmd))
return 0;
@@ -92,6 +93,8 @@ static uint32_t dcn31_panel_cntl_hw_init(struct panel_cntl *panel_cntl)
panel_cntl->stored_backlight_registers.BL_PWM_PERIOD_CNTL = cmd.panel_cntl.data.bl_pwm_period_cntl;
panel_cntl->stored_backlight_registers.LVTMA_PWRSEQ_REF_DIV_BL_PWM_REF_DIV =
cmd.panel_cntl.data.bl_pwm_ref_div1;
+ panel_cntl->stored_backlight_registers.PANEL_PWRSEQ_REF_DIV2 =
+ cmd.panel_cntl.data.bl_pwm_ref_div2;
return cmd.panel_cntl.data.current_backlight;
}
diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw/panel_cntl.h b/drivers/gpu/drm/amd/display/dc/inc/hw/panel_cntl.h
index 48eac622c6a0..24af9d80b937 100644
--- a/drivers/gpu/drm/amd/display/dc/inc/hw/panel_cntl.h
+++ b/drivers/gpu/drm/amd/display/dc/inc/hw/panel_cntl.h
@@ -39,6 +39,7 @@ struct panel_cntl_backlight_registers {
unsigned int BL_PWM_CNTL2;
unsigned int BL_PWM_PERIOD_CNTL;
unsigned int LVTMA_PWRSEQ_REF_DIV_BL_PWM_REF_DIV;
+ unsigned int PANEL_PWRSEQ_REF_DIV2;
};
struct panel_cntl_funcs {
diff --git a/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h b/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h
index 8521508af755..294717e09abf 100644
--- a/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h
+++ b/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h
@@ -1450,6 +1450,80 @@ enum dmub_cmd_mall_type {
DMUB_CMD__MALL_ACTION_NO_DF_REQ = 3,
};
+/**
+ * PHY Link rate for DP.
+ */
+enum phy_link_rate {
+ /**
+ * not supported.
+ */
+ PHY_RATE_UNKNOWN = 0,
+ /**
+ * Rate_1 (RBR) - 1.62 Gbps/Lane
+ */
+ PHY_RATE_162 = 1,
+ /**
+ * Rate_2 - 2.16 Gbps/Lane
+ */
+ PHY_RATE_216 = 2,
+ /**
+ * Rate_3 - 2.43 Gbps/Lane
+ */
+ PHY_RATE_243 = 3,
+ /**
+ * Rate_4 (HBR) - 2.70 Gbps/Lane
+ */
+ PHY_RATE_270 = 4,
+ /**
+ * Rate_5 (RBR2)- 3.24 Gbps/Lane
+ */
+ PHY_RATE_324 = 5,
+ /**
+ * Rate_6 - 4.32 Gbps/Lane
+ */
+ PHY_RATE_432 = 6,
+ /**
+ * Rate_7 (HBR2)- 5.40 Gbps/Lane
+ */
+ PHY_RATE_540 = 7,
+ /**
+ * Rate_8 (HBR3)- 8.10 Gbps/Lane
+ */
+ PHY_RATE_810 = 8,
+ /**
+ * UHBR10 - 10.0 Gbps/Lane
+ */
+ PHY_RATE_1000 = 9,
+ /**
+ * UHBR13.5 - 13.5 Gbps/Lane
+ */
+ PHY_RATE_1350 = 10,
+ /**
+ * UHBR10 - 20.0 Gbps/Lane
+ */
+ PHY_RATE_2000 = 11,
+};
+
+/**
+ * enum dmub_phy_fsm_state - PHY FSM states.
+ * PHY FSM state to transit to during PSR enable/disable.
+ */
+enum dmub_phy_fsm_state {
+ DMUB_PHY_FSM_POWER_UP_DEFAULT = 0,
+ DMUB_PHY_FSM_RESET,
+ DMUB_PHY_FSM_RESET_RELEASED,
+ DMUB_PHY_FSM_SRAM_LOAD_DONE,
+ DMUB_PHY_FSM_INITIALIZED,
+ DMUB_PHY_FSM_CALIBRATED,
+ DMUB_PHY_FSM_CALIBRATED_LP,
+ DMUB_PHY_FSM_CALIBRATED_PG,
+ DMUB_PHY_FSM_POWER_DOWN,
+ DMUB_PHY_FSM_PLL_EN,
+ DMUB_PHY_FSM_TX_EN,
+ DMUB_PHY_FSM_FAST_LP,
+};
+
+
/**
* Data passed from driver to FW in a DMUB_CMD__PSR_COPY_SETTINGS command.
@@ -1698,9 +1772,16 @@ struct dmub_cmd_psr_force_static_data {
*/
uint8_t panel_inst;
/**
- * Explicit padding to 4 byte boundary.
+ * Phy state to enter.
+ * Values to use are defined in dmub_phy_fsm_state
*/
- uint8_t pad[2];
+ uint8_t phy_fsm_state;
+ /**
+ * Phy rate for DP - RBR/HBR/HBR2/HBR3.
+ * Set this using enum phy_link_rate.
+ * This does not support HDMI/DP2 for now.
+ */
+ uint8_t phy_rate;
};
/**
@@ -2377,6 +2458,9 @@ struct dmub_cmd_panel_cntl_data {
uint32_t bl_pwm_ref_div1; /* in/out */
uint8_t is_backlight_on : 1; /* in/out */
uint8_t is_powered_on : 1; /* in/out */
+ uint8_t padding[3];
+ uint32_t bl_pwm_ref_div2; /* in/out */
+ uint8_t reserved[4];
};
/**
--
2.35.1
