Re: [RFC] Upstreaming Linux for Nintendo Wii U

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Ash Logan <ash@xxxxxxxxxxxx> writes:
> Hello,

Hi Ash,

I can't really answer all your questions, but I can chime in on one or
two things ...

> - Right now I've made a new platform (like ps3) rather than joining the
> GameCube and Wii in embedded6xx, since that is marked as BROKEN_ON_SMP.
> The Wii U is a 3-core system, though a CPU bug[8] prevents existing
> userspaces working with it. Bit of a "cross that bridge when we get
> there" situation, though I'm reluctant to prevent that possibility by
> using a BROKEN_ON_SMP platform.

I'm happy for it to be a new platform. I'd almost prefer it to be a
separate platform, that way you can make changes in your platform code
without worrying (as much) about breaking other platforms.

> - Like the Wii before it, the Wii U has a small amount of RAM at address
> zero, a gap, then a large amount of RAM at a higher address. Instead of
> the "map everything and reserve the gap" approach of the Wii, we loop
> over each memblock and map only true RAM[9]. This seems to work, but as
> far as I can tell is unique amongst powerpc32 platforms, so it's worth
> pointing out. (Note: I've been told this doesn't work anymore after some
> KUAP changes[10], so this point might be moot; haven't investigated)

We'd need more detail on that I guess. Currently all the 32-bit
platforms use the flat memory model, which assumes RAM is a single
contiguous block. Though that doesn't mean it all has to be used or
mapped, like the Wii does. To properly support your layout you should be
using sparsemem, but it's possible that's more trouble than it's worth,
I'm not sure. How far apart are the low and high blocks of RAM, and what
are their sizes?

> - Due to the aformentioned DMA restrictions and possibly a fatal
> bytemasking bug on uncached mappings[11], I have been wondering if it'd
> be better to just give up on the SRAM at address 0 altogether and use it
> as VRAM or something, loading the kernel at a higher address.

Don't you have exceptions entering down at low addresses? Even so you
could possibly trampoline them up to the kernel at a high address.
 
> In terms of platform bringup, the key issue is whether to be embedded6xx
> or not and what output device to use. Beyond that it's just things like
> IRQ controller drivers, should be pretty straightforward. I think on our
> end, we'll start rebasing to 5.15 (LTS) and start sending patches from
> there. I know getting closer to HEAD is preferable, this project has
> just moved very slowly in the past and being on LTS has been a lifesaver.

As I said I'm happy for it to be a new platform. If there ends up being
a lot of shared code we can always refactor, but embedded6xx is only
~1500 LOC anyway.

One thing that has come up with previous console port submissions is the
requirement for patches to be signed off. The docs are here if you
aren't familiar with them:
  https://www.kernel.org/doc/html/latest/process/submitting-patches.html#sign-your-work-the-developer-s-certificate-of-origin

Otherwise your plan sounds good to me, 4.19 is pretty old so getting up
to 5.15 would be a good start. Then submit whatever bits you can and
chip away at it.

cheers



[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux