Re: [RFC 0/6] Define and use reset domain for GPU recovery in amdgpu

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2021-12-20 12:06 p.m., Liu, Shaoyun wrote:

[AMD Official Use Only]


Hi , Andrey
I actually has some concerns about this  change .
1.  on SRIOV configuration , the reset notify coming  from host , and driver already trigger a work queue to handle the reset (check xgpu_*_mailbox_flr_work) , is it a good idea to trigger another work queue inside the work queue ?  Can  we just use the  new one  you added ?


Shouldn't be a problem,  i will change. In fact it's a great idea because then it looks like we can totally drop 'adev->in_gpu_reset' since we don't need to lock again concurrent resets anymore


2. For KFD,  the rocm use the user queue for the submission and it won't call the drm scheduler  and hence no job timeout.  Can  we handle that with  your new change ?


I think that not a problem - a lot of places use direct submissions and not scheduler, in case they need to synchronize against concurrent GPU resets they lock adev->reset_sem. Nothing changes in this sense.


3 . For XGMI hive, there is only hive reset for all devices on bare-metal config , but for SRIOV config , the VF will support VF FLR, which means host might only need to reset specific device instead trigger whole hive reset . So we might still need reset_domain for individual device within the hive for SRIOV configuration.


This is something future right ? I don't see it in the code - in this case we will have to account for this as part of the generic design for this kind of single device reset within XGMI hive. It should require only a minor addition to current design in creating 2 parallel reset domains - one for hive and one per device.



Anyway I think this change need to be verified on sriov configuration on XGMI with  some rocm use app is running .


I do have XGMI setup where I still test XGMI resets. It has ROCm stack there - can you please login there and tell me if I have what needed there to do the tests you advise ? I am not very familiar with ROCm tools as i usually test using libdrm. (Ping me on teams for the device ip and user name)

Andrey



Regards
Shaoyun.liu

-----Original Message-----
From: amd-gfx <amd-gfx-bounces@xxxxxxxxxxxxxxxxxxxxx> On Behalf Of Christian König
Sent: Monday, December 20, 2021 2:25 AM
To: Grodzovsky, Andrey <Andrey.Grodzovsky@xxxxxxx>; dri-devel@xxxxxxxxxxxxxxxxxxxxx; amd-gfx@xxxxxxxxxxxxxxxxxxxxx
Cc: daniel@xxxxxxxx; Chen, Horace <Horace.Chen@xxxxxxx>; Koenig, Christian <Christian.Koenig@xxxxxxx>; Liu, Monk <Monk.Liu@xxxxxxx>
Subject: Re: [RFC 0/6] Define and use reset domain for GPU recovery in amdgpu

Am 17.12.21 um 23:27 schrieb Andrey Grodzovsky:
This patchset is based on earlier work by Boris[1] that allowed to
have an ordered workqueue at the driver level that will be used by the
different schedulers to queue their timeout work. On top of that I
also serialized any GPU reset we trigger from within amdgpu code to
also go through the same ordered wq and in this way simplify somewhat
our GPU reset code so we don't need to protect from concurrency by
multiple GPU reset triggeres such as TDR on one hand and sysfs trigger or RAS trigger on the other hand.

As advised by Christian and Daniel I defined a reset_domain struct
such that all the entities that go through reset together will be
serialized one against another.

TDR triggered by multiple entities within the same domain due to the
same reason will not be triggered as the first such reset will cancel
all the pending resets. This is relevant only to TDR timers and not to
triggered resets coming from RAS or SYSFS, those will still happen after the in flight resets finishes.

[1]
https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatc
hwork.kernel.org%2Fproject%2Fdri-devel%2Fpatch%2F20210629073510.276439
1-3-boris.brezillon%40collabora.com%2F&amp;data=04%7C01%7CShaoyun.Liu%
40amd.com%7C1d2b07ad556b4da5d58808d9c389decf%7C3dd8961fe4884e608e11a82
d994e183d%7C0%7C0%7C637755819206627827%7CUnknown%7CTWFpbGZsb3d8eyJWIjo
iMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&amp
;sdata=8C8UbdPmM%2FH6sdTYDP5lZfRfBdQ%2B%2FN7m6s%2FREW8%2BsoM%3D&amp;re
served=0

P.S Going through drm-misc-next and not amd-staging-drm-next as Boris work hasn't landed yet there.
Patches #1 and #5, #6 are Reviewed-by: Christian König <christian.koenig@xxxxxxx>

Some minor comments on the rest, but in general absolutely looks like the way we want to go.

Regards,
Christian.

Andrey Grodzovsky (6):
    drm/amdgpu: Init GPU reset single threaded wq
    drm/amdgpu: Move scheduler init to after XGMI is ready
    drm/amdgpu: Fix crash on modprobe
    drm/amdgpu: Serialize non TDR gpu recovery with TDRs
    drm/amdgpu: Drop hive->in_reset
    drm/amdgpu: Drop concurrent GPU reset protection for device

   drivers/gpu/drm/amd/amdgpu/amdgpu.h        |   9 +
   drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 206 +++++++++++----------
   drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c  |  36 +---
   drivers/gpu/drm/amd/amdgpu/amdgpu_job.c    |   2 +-
   drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h   |   2 +
   drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c   |  10 +-
   drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.h   |   3 +-
   7 files changed, 132 insertions(+), 136 deletions(-)




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux