Play a video on the raven (or PCO, raven2) platform, and then do the S3
test. When resume, the following error will be reported:
amdgpu 0000:02:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring
vcn_dec test failed (-110)
[drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP block
<vcn_v1_0> failed -110
amdgpu 0000:02:00.0: amdgpu: amdgpu_device_ip_resume failed (-110).
PM: dpm_run_callback(): pci_pm_resume+0x0/0x90 returns -110
[why]
When playing the video: The power state flag of the vcn block is set to
POWER_STATE_ON.
When doing suspend: There is no change to the power state flag of the
vcn block, it is still POWER_STATE_ON.
When doing resume: Need to open the power gate of the vcn block and set
the power state flag of the VCN block to POWER_STATE_ON.
But at this time, the power state flag of the vcn block is already
POWER_STATE_ON. The power status flag check in the "8f2cdef drm/amd/pm:
avoid duplicate powergate/ungate setting" patch will return the
amdgpu_dpm_set_powergating_by_smu function directly.
As a result, the gate of the power was not opened, causing the
subsequent ring test to fail.
[how]
In the suspend function of the vcn block, explicitly change the power
state flag of the vcn block to POWER_STATE_OFF.
Signed-off-by: chen gong <curry.gong@xxxxxxx>
---
drivers/gpu/drm/amd/amdgpu/vcn_v1_0.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/gpu/drm/amd/amdgpu/vcn_v1_0.c b/drivers/gpu/drm/amd/amdgpu/vcn_v1_0.c
index d54d720..d73676b 100644
--- a/drivers/gpu/drm/amd/amdgpu/vcn_v1_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/vcn_v1_0.c
@@ -246,6 +246,13 @@ static int vcn_v1_0_suspend(void *handle)
{
int r;
struct amdgpu_device *adev = (struct amdgpu_device *)handle;
+ bool cancel_success;
+
+ cancel_success = cancel_delayed_work_sync(&adev->vcn.idle_work);
+ if (cancel_success) {
+ if (adev->pm.dpm_enabled)
+ amdgpu_dpm_enable_uvd(adev, false);
+ }
r = vcn_v1_0_hw_fini(adev);
if (r)
--
2.7.4
