[PATCH 04/14] drm/amd/display: set MSA vsp/hsp to 0 for positive polarity for DP 128b/132b

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Wenjing Liu <wenjing.liu@xxxxxxx>

[why]
There is a bug in MSA programming sequence that mistakenly set
MSA vsp/hsp to 1 for positive polarity. This is incorrect.

Reviewed-by: Ariel Bernstein <Eric.Bernstein@xxxxxxx>
Acked-by: Wayne Lin <wayne.lin@xxxxxxx>
Signed-off-by: Wenjing Liu <wenjing.liu@xxxxxxx>
---
 .../drm/amd/display/dc/dcn31/dcn31_hpo_dp_stream_encoder.c    | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hpo_dp_stream_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hpo_dp_stream_encoder.c
index 565f12dd179a..5065904c7833 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hpo_dp_stream_encoder.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hpo_dp_stream_encoder.c
@@ -358,8 +358,8 @@ static void dcn31_hpo_dp_stream_enc_set_stream_attribute(
 
 	h_width = hw_crtc_timing.h_border_left + hw_crtc_timing.h_addressable + hw_crtc_timing.h_border_right;
 	v_height = hw_crtc_timing.v_border_top + hw_crtc_timing.v_addressable + hw_crtc_timing.v_border_bottom;
-	hsp = hw_crtc_timing.flags.HSYNC_POSITIVE_POLARITY ? 0x80 : 0;
-	vsp = hw_crtc_timing.flags.VSYNC_POSITIVE_POLARITY ? 0x80 : 0;
+	hsp = hw_crtc_timing.flags.HSYNC_POSITIVE_POLARITY ? 0 : 0x80;
+	vsp = hw_crtc_timing.flags.VSYNC_POSITIVE_POLARITY ? 0 : 0x80;
 	v_freq = hw_crtc_timing.pix_clk_100hz * 100;
 
 	/*   MSA Packet Mapping to 32-bit Link Symbols - DP2 spec, section 2.7.4.1
-- 
2.25.1




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux