From: Michael Strauss <michael.strauss@xxxxxxx>
[WHY]
On certain configs, SMU clock table voltages don't match which cause parser
to behave incorrectly by leaving dcfclk and socclk table entries unpopulated.
[HOW]
Currently the function that finds the corresponding clock for a given voltage
only checks for exact voltage level matches. In the case that no match gets
found, parser now falls back to searching for the max clock which meets the
requested voltage (i.e. its corresponding voltage is below requested).
Signed-off-by: Michael Strauss <michael.strauss@xxxxxxx>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@xxxxxxx>
---
.../amd/display/dc/clk_mgr/dcn31/dcn31_clk_mgr.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_clk_mgr.c
index 0088dff441da..f4c9a458ace8 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_clk_mgr.c
@@ -523,14 +523,21 @@ static unsigned int find_clk_for_voltage(
unsigned int voltage)
{
int i;
+ int max_voltage = 0;
+ int clock = 0;
for (i = 0; i < NUM_SOC_VOLTAGE_LEVELS; i++) {
- if (clock_table->SocVoltage[i] == voltage)
+ if (clock_table->SocVoltage[i] == voltage) {
return clocks[i];
+ } else if (clock_table->SocVoltage[i] >= max_voltage &&
+ clock_table->SocVoltage[i] < voltage) {
+ max_voltage = clock_table->SocVoltage[i];
+ clock = clocks[i];
+ }
}
- ASSERT(0);
- return 0;
+ ASSERT(clock);
+ return clock;
}
void dcn31_clk_mgr_helper_populate_bw_params(
--
2.25.1
