1. change return value to avoid smu driver probe fails when FEATURE_PPT is
not enabled.
2. if FEATURE_PPT is not enabled, set power limit value to 0.
Signed-off-by: Kevin Wang <kevin1.wang@xxxxxxx>
---
.../gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c
index fd04391364ac..e00ac43515bb 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c
@@ -1194,8 +1194,19 @@ static int aldebaran_get_power_limit(struct smu_context *smu,
uint32_t power_limit = 0;
int ret;
- if (!smu_cmn_feature_is_enabled(smu, SMU_FEATURE_PPT_BIT))
- return -EINVAL;
+ if (!smu_cmn_feature_is_enabled(smu, SMU_FEATURE_PPT_BIT)) {
+ if (current_power_limit)
+ *current_power_limit = 0;
+ if (default_power_limit)
+ *default_power_limit = 0;
+ if (max_power_limit)
+ *max_power_limit = 0;
+
+ dev_err(smu->adev->dev,
+ "the PPT feature is not enabled, set power limit to 0");
+
+ return 0;
+ }
/* Valid power data is available only from primary die.
* For secondary die show the value as 0.
--
2.25.1
