From: Wesley Chalmers <Wesley.Chalmers@xxxxxxx>
[WHY]
SCR for DP2.0 requires that LT be performed with PHY_REPEATER_MODE
programmed to 0x55 (Transparent) whenever PHY_REPEATER_CNT is any value
other than 0x80, 0x40, 0x20, 0x10, 0x08, 0x04, 0x02, or 0x01.
[HOW]
Write Non-Transparent (0xAA) to PHY_REPEATER_MODE when LTTPRs detected and Non-Transparent is
requested.
Write Transparent in all other cases.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@xxxxxxx>
Reviewed-by: Jun Lei <Jun.Lei@xxxxxxx>
Acked-by: Anson Jacob <Anson.Jacob@xxxxxxx>
---
drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index 586f05a6cd77..c68b49a14f88 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -1618,11 +1618,10 @@ enum dc_status dpcd_configure_lttpr_mode(struct dc_link *link, struct link_train
{
enum dc_status status = DC_OK;
- if (lt_settings->lttpr_mode == LTTPR_MODE_TRANSPARENT)
- status = configure_lttpr_mode_transparent(link);
-
- else if (lt_settings->lttpr_mode == LTTPR_MODE_NON_TRANSPARENT)
+ if (lt_settings->lttpr_mode == LTTPR_MODE_NON_TRANSPARENT)
status = configure_lttpr_mode_non_transparent(link, lt_settings);
+ else
+ status = configure_lttpr_mode_transparent(link);
return status;
}
--
2.25.1
_______________________________________________
amd-gfx mailing list
amd-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
