Am 2021-04-28 um 11:11 a.m. schrieb Eric Huang:
In NPS4 BIOS we need to find the closest numa node when creating
topology io link between cpu and gpu, if PCI driver doesn't set
it.
Signed-off-by: Eric Huang <jinhuieric.huang@xxxxxxx>
---
drivers/gpu/drm/amd/amdkfd/kfd_crat.c | 94 ++++++++++++++++++++++++++-
1 file changed, 91 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_crat.c b/drivers/gpu/drm/amd/amdkfd/kfd_crat.c
index 38d45711675f..57518136c7d7 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_crat.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_crat.c
@@ -1759,6 +1759,87 @@ static int kfd_fill_gpu_memory_affinity(int *avail_size,
return 0;
}
+#ifdef CONFIG_ACPI
+static void kfd_find_numa_node_in_srat(struct kfd_dev *kdev,
+ int *numa_node)
+{
+ struct acpi_table_header *table_header = NULL;
+ struct acpi_subtable_header *sub_header = NULL;
+ unsigned long table_end, subtable_len;
+ u32 pci_id = pci_domain_nr(kdev->pdev->bus) << 16 |
+ pci_dev_id(kdev->pdev);
+ u32 bdf;
+ acpi_status status;
+ struct acpi_srat_cpu_affinity *cpu;
+ struct acpi_srat_generic_affinity *gpu;
+ int pxm = 0, max_pxm = 0;
+ bool found = false;
+
+ /* Fetch the SRAT table from ACPI */
+ status = acpi_get_table(ACPI_SIG_SRAT, 0, &table_header);
+ if (status == AE_NOT_FOUND) {
+ pr_warn("SRAT table not found\n");
+ return;
+ } else if (ACPI_FAILURE(status)) {
+ const char *err = acpi_format_exception(status);
+ pr_err("SRAT table error: %s\n", err);
+ return;
+ }
After a successful call to acpi_get_table you need to call
acpi_put_table before this function returns to avoid leaking memory.
+
+ table_end = (unsigned long)table_header + table_header->length;
+
+ /* Parse all entries looking for a match. */
+
+ sub_header = (struct acpi_subtable_header *)
+ ((unsigned long)table_header +
+ sizeof(struct acpi_table_srat));
+ subtable_len = sub_header->length;
+
+ while (((unsigned long)sub_header) + subtable_len < table_end) {
+ /*
+ * If length is 0, break from this loop to avoid
+ * infinite loop.
+ */
+ if (subtable_len == 0) {
+ pr_err("SRAT invalid zero length\n");
+ break;
+ }
+
+ switch (sub_header->type) {
+ case ACPI_SRAT_TYPE_CPU_AFFINITY:
+ cpu = (struct acpi_srat_cpu_affinity *)sub_header;
+ pxm = *((u32 *)cpu->proximity_domain_hi) << 8 |
+ cpu->proximity_domain_lo;
+ if (pxm > max_pxm)
+ max_pxm = pxm;
+ break;
+ case ACPI_SRAT_TYPE_GENERIC_AFFINITY:
+ gpu = (struct acpi_srat_generic_affinity *)sub_header;
+ bdf = *((u16 *)(&gpu->device_handle[0])) << 16 |
+ *((u16 *)(&gpu->device_handle[2]));
+ if (bdf == pci_id) {
+ found = true;
+ *numa_node = pxm_to_node(gpu->proximity_domain);
+ }
+ break;
+ default:
+ break;
+ }
+
+ if (found)
+ break;
+
+ sub_header = (struct acpi_subtable_header *)
+ ((unsigned long)sub_header + subtable_len);
+ subtable_len = sub_header->length;
+ }
+
+ /* workaround bad cpu-gpu binding case */
+ if (found && (*numa_node < 0 || *numa_node > max_pxm))
+ *numa_node = 0;
A suggestion: If you find a sensible NUMA node, call set_dev_node here.
That simplifies the caller. See below
+}
+#endif
+
/* kfd_fill_gpu_direct_io_link - Fill in direct io link from GPU
* to its NUMA node
* @avail_size: Available size in the memory
@@ -1774,6 +1855,9 @@ static int kfd_fill_gpu_direct_io_link_to_cpu(int *avail_size,
uint32_t proximity_domain)
{
struct amdgpu_device *adev = (struct amdgpu_device *)kdev->kgd;
+#ifdef CONFIG_NUMA
+ int numa_node = 0;
Should this be NUMA_NO_NODE?
+#endif
*avail_size -= sizeof(struct crat_subtype_iolink);
if (*avail_size < 0)
@@ -1805,9 +1889,13 @@ static int kfd_fill_gpu_direct_io_link_to_cpu(int *avail_size,
sub_type_hdr->proximity_domain_from = proximity_domain;
#ifdef CONFIG_NUMA
- if (kdev->pdev->dev.numa_node == NUMA_NO_NODE)
- sub_type_hdr->proximity_domain_to = 0;
- else
+ if (kdev->pdev->dev.numa_node == NUMA_NO_NODE) {
+#ifdef CONFIG_ACPI
+ kfd_find_numa_node_in_srat(kdev, &numa_node);
+#endif
+ sub_type_hdr->proximity_domain_to = numa_node;
+ set_dev_node(&kdev->pdev->dev, numa_node);
+ } else
sub_type_hdr->proximity_domain_to = kdev->pdev->dev.numa_node;
It's better style to use braces on all if/else branches, if one branch
needs them.
But with my suggestion above this would become simpler:
+#ifdef CONFIG_ACPI
+ if (kdev->pdev->dev.numa_node == NUMA_NO_NODE)
+ kfd_find_numa_node_in_srat(kdev);
+#endif
if (kdev->pdev->dev.numa_node == NUMA_NO_NODE)
sub_type_hdr->proximity_domain_to = 0;
else
sub_type_hdr->proximity_domain_to = kdev->pdev->dev.numa_node;
Regards,
Felix
#else
sub_type_hdr->proximity_domain_to = 0;
