[AMD Public Use]
> -----Original Message-----
> From: Tuikov, Luben <Luben.Tuikov@xxxxxxx>
> Sent: Sunday, April 11, 2021 9:15 PM
> To: amd-gfx@xxxxxxxxxxxxxxxxxxxxx
> Cc: Tuikov, Luben <Luben.Tuikov@xxxxxxx>; Deucher, Alexander
> <Alexander.Deucher@xxxxxxx>; Clements, John
> <John.Clements@xxxxxxx>; Zhang, Hawking <Hawking.Zhang@xxxxxxx>
> Subject: [PATCH] drm/amdgpu: Fix checking return result of retire page
>
> * Remove double-sscanf to scan for %llu and
> 0x%llx, as that is not going to work--the %llu
> will consume the "0" in "0x" of your input,
> and a hex value can never be consumed. And just
> entering a hex number without leading 0x will
> either be scanned as a string and not match,
> or the leading decimal portion is scanned
> which is not correct. Thus remove the first
> %llu scan and leave only the %llx scan,
> removing the leading 0x since %llx can scan
> either.
>
> * Fix logic the check of the result of
> amdgpu_reserve_page_direct()--it is 0
> on success, and non-zero on error.
>
> * Add bad_page_cnt_threshold to debugfs for
> reporting purposes only--it usually matches the
> size of EEPROM but may be different depending on
> module option. Small other improvements.
>
> * Improve kernel-doc for the sysfs interface.
I think these should be split into 4 separate patches. The first two are bug fixes, the latter two are general improvements.
Thanks,
Alex
>
> Cc: Alexander Deucher <Alexander.Deucher@xxxxxxx>
> Cc: John Clements <john.clements@xxxxxxx>
> Cc: Hawking Zhang <Hawking.Zhang@xxxxxxx>
> Signed-off-by: Luben Tuikov <luben.tuikov@xxxxxxx>
> ---
> drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c | 67 ++++++++++++-----------
> --
> 1 file changed, 32 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
> b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
> index 0541196ae1ed..c4b94b444b90 100644
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
> @@ -114,7 +114,7 @@ static int amdgpu_reserve_page_direct(struct
> amdgpu_device *adev, uint64_t addre
>
> if (amdgpu_ras_check_bad_page(adev, address)) {
> dev_warn(adev->dev,
> - "RAS WARN: 0x%llx has been marked as bad
> page!\n",
> + "RAS WARN: 0x%llx has already been marked as bad
> page!\n",
> address);
> return 0;
> }
> @@ -228,11 +228,9 @@ static int
> amdgpu_ras_debugfs_ctrl_parse_data(struct file *f,
> return -EINVAL;
>
> if (op != -1) {
> -
> if (op == 3) {
> - if (sscanf(str, "%*s %llu", &address) != 1)
> - if (sscanf(str, "%*s 0x%llx", &address) != 1)
> - return -EINVAL;
> + if (sscanf(str, "%*s %llx", &address) != 1)
> + return -EINVAL;
>
> data->op = op;
> data->inject.address = address;
> @@ -255,11 +253,9 @@ static int
> amdgpu_ras_debugfs_ctrl_parse_data(struct file *f,
> data->op = op;
>
> if (op == 2) {
> - if (sscanf(str, "%*s %*s %*s %u %llu %llu",
> - &sub_block, &address,
> &value) != 3)
> - if (sscanf(str, "%*s %*s %*s 0x%x 0x%llx
> 0x%llx",
> - &sub_block,
> &address, &value) != 3)
> - return -EINVAL;
> + if (sscanf(str, "%*s %*s %*s %x %llx %llx",
> + &sub_block, &address, &value) != 3)
> + return -EINVAL;
> data->head.sub_block_index = sub_block;
> data->inject.address = address;
> data->inject.value = value;
> @@ -278,7 +274,7 @@ static int
> amdgpu_ras_debugfs_ctrl_parse_data(struct file *f,
> /**
> * DOC: AMDGPU RAS debugfs control interface
> *
> - * It accepts struct ras_debug_if who has two members.
> + * The control interface accepts struct ras_debug_if which has two
> members.
> *
> * First member: ras_debug_if::head or ras_debug_if::inject.
> *
> @@ -303,32 +299,33 @@ static int
> amdgpu_ras_debugfs_ctrl_parse_data(struct file *f,
> *
> * How to use the interface?
> *
> - * Programs
> + * Program
> *
> * Copy the struct ras_debug_if in your codes and initialize it.
> * Write the struct to the control node.
> *
> - * Shells
> + * Shell
> *
> * .. code-block:: bash
> *
> - * echo op block [error [sub_block address value]] > .../ras/ras_ctrl
> + * echo "disable <block>" > /sys/kernel/debug/dri/<N>/ras/ras_ctrl
> + * echo "enable <block> <error>" >
> /sys/kernel/debug/dri/<N>/ras/ras_ctrl
> + * echo "inject <block> <error> <sub-block> <address> <value> >
> /sys/kernel/debug/dri/<N>/ras/ras_ctrl
> *
> - * Parameters:
> + * Where N, is the card which you want to affect.
> *
> - * op: disable, enable, inject
> - * disable: only block is needed
> - * enable: block and error are needed
> - * inject: error, address, value are needed
> - * block: umc, sdma, gfx, .........
> + * "disable" requires only the block.
> + * "enable" requires the block and error type.
> + * "inject" requires the block, error type, address, and value.
> + * The block is one of: umc, sdma, gfx, etc.
> * see ras_block_string[] for details
> - * error: ue, ce
> - * ue: multi_uncorrectable
> - * ce: single_correctable
> - * sub_block:
> - * sub block index, pass 0 if there is no sub block
> + * The error type is one of: ue, ce, where,
> + * ue is multi-uncorrectable
> + * ce is single-correctable
> + * The sub-block is a the sub-block index, pass 0 if there is no sub-block.
> + * The address and value are hexadecimal numbers, leading 0x is optional.
> *
> - * here are some examples for bash commands:
> + * For instance,
> *
> * .. code-block:: bash
> *
> @@ -336,17 +333,17 @@ static int
> amdgpu_ras_debugfs_ctrl_parse_data(struct file *f,
> * echo inject umc ce 0 0 0 > /sys/kernel/debug/dri/0/ras/ras_ctrl
> * echo disable umc > /sys/kernel/debug/dri/0/ras/ras_ctrl
> *
> - * How to check the result?
> + * How to check the result of the operation?
> *
> - * For disable/enable, please check ras features at
> + * To check disable/enable, see "ras" features at,
> * /sys/class/drm/card[0/1/2...]/device/ras/features
> *
> - * For inject, please check corresponding err count at
> - * /sys/class/drm/card[0/1/2...]/device/ras/[gfx/sdma/...]_err_count
> + * To check inject, see the corresponding error count at,
> + * /sys/class/drm/card[0/1/2...]/device/ras/[gfx|sdma|umc|...]_err_count
> *
> * .. note::
> * Operations are only allowed on blocks which are supported.
> - * Please check ras mask at
> /sys/module/amdgpu/parameters/ras_mask
> + * Check the "ras" mask at /sys/module/amdgpu/parameters/ras_mask
> * to see which blocks support RAS on a particular asic.
> *
> */
> @@ -367,11 +364,9 @@ static ssize_t amdgpu_ras_debugfs_ctrl_write(struct
> file *f, const char __user *
> if (ret)
> return -EINVAL;
>
> - if (data.op == 3)
> - {
> + if (data.op == 3) {
> ret = amdgpu_reserve_page_direct(adev,
> data.inject.address);
> -
> - if (ret)
> + if (!ret)
> return size;
> else
> return ret;
> @@ -1269,6 +1264,8 @@ static struct dentry
> *amdgpu_ras_debugfs_create_ctrl_node(struct amdgpu_device *
> &amdgpu_ras_debugfs_ctrl_ops);
> debugfs_create_file("ras_eeprom_reset", S_IWUGO | S_IRUGO, dir,
> adev,
> &amdgpu_ras_debugfs_eeprom_ops);
> + debugfs_create_u32("bad_page_cnt_threshold", S_IRUGO, dir,
> + &con->bad_page_cnt_threshold);
>
> /*
> * After one uncorrectable error happens, usually GPU recovery will
> --
> 2.31.0.97.g1424303384
_______________________________________________
amd-gfx mailing list
amd-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
