From: "Emily.Deng" <Emily.Deng@xxxxxxx>
For vf assigned to guest VM, after FLR, the msix table will be reset.
As the flr is done on host driver. The qemu and vfio driver don't know
this, and the msix is still enable from qemu and vfio driver side.
So if want to re-setup the msix table, first need to disable and
re-enable the msix from guest VM side or the qemu will do nothing as
it thought the msix is already enabled.
v2:
Change name with amdgpu_irq prefix, remove #ifdef.
Signed-off-by: Emily.Deng <Emily.Deng@xxxxxxx>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c
index 03412543427a..3045f52e613d 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c
@@ -277,6 +277,17 @@ static bool amdgpu_msi_ok(struct amdgpu_device *adev)
return true;
}
+static void amdgpu_irq_restore_msix(struct amdgpu_device *adev)
+{
+ u16 ctrl;
+
+ pci_read_config_word(adev->pdev, adev->pdev->msix_cap + PCI_MSIX_FLAGS, &ctrl);
+ ctrl &= ~PCI_MSIX_FLAGS_ENABLE;
+ pci_write_config_word(adev->pdev, adev->pdev->msix_cap + PCI_MSIX_FLAGS, ctrl);
+ ctrl |= PCI_MSIX_FLAGS_ENABLE;
+ pci_write_config_word(adev->pdev, adev->pdev->msix_cap + PCI_MSIX_FLAGS, ctrl);
+}
+
/**
* amdgpu_irq_init - initialize interrupt handling
*
@@ -558,6 +569,9 @@ void amdgpu_irq_gpu_reset_resume_helper(struct amdgpu_device *adev)
{
int i, j, k;
+ if (amdgpu_sriov_vf(adev))
+ amdgpu_irq_restore_msix(adev);
+
for (i = 0; i < AMDGPU_IRQ_CLIENTID_MAX; ++i) {
if (!adev->irq.client[i].sources)
continue;
--
2.25.1
_______________________________________________
amd-gfx mailing list
amd-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
